$100 Gift Certificate. The Gift Card Code will be emailed to you.

$300 Gift Certificate. The Gift Card Code will be emailed to you.

$50 Gift Certificate. The Gift Card Code will be emailed to you.

12 Pack of Empty 2 oz. bottles with caps.

6 Layer coils hand wrapped. One Pair, Not soldered, No Capacitor.

Available as 1.25" Full Size and 1.125" Coils.

8 Layer coils hand wrapped . One Pair, Not soldered, No Capacitor.

Available as either 1" Mini Coils, 1.125" Coils or 1.25" Full Size Coils.

Vitamin A&D Ointment Available in Foil Packs

- 1 Box of Foil Packs, 5-Gram, 144-Count. $11
- 1 Case, 6 boxes of Foils Packs, 5-Gram, 864 Count. $54

Aaron Cain Octet Liner and Shader! Classic Aaron Cain styling mixed with his precision building and tuning resulting in a basic Workhorse version of his famed customs and carved machines.

- CNC Cut Iron Mini Frames
- Durable Workhorse Red Oxide Finish
- Standard Workhorse Blackened Steel Hardware
- 1" 8 Wrap Black Heat Shrink Coils
- Quick with a Medium Stroke and Solid Medium Hit
- Running 150-155 Hz @ 6.5 V unloaded
- Pushing 3's to 9's with ease
- Weighs 6.45 Ounces
- MADE IN THE USA

Aaron Cain Octet Liner and Shader! Classic Aaron Cain styling mixed with his precision building and tuning resulting in a basic Workhorse version of his famed customs and carved machines.

- New CNC Cut Iron Frame
- Durable Workhorse Red Oxide Finish
- Standard Workhorse Blackened Steel Hardware
- 1.25" 8 Wrap Black Heat Shrink Coils
- Long Stroke with a Hard Medium Hit
- Running 100-110 Hz @ 6.5 V unloaded
- Pushing 5's to 11's no problem
- Weighs 6.45 Ounces
- MADE IN THE USA

Aaron Cain Roundback Liner Ver 2.0, based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

- CNC Cut Iron Mini Frames
- Durable Workhorse Red Oxide Finish
- Standard Workhorse Blackened Steel Hardware
- 1" 8 Wrap Black Heat Shrink Coils
- Quick with a Medium Stroke and a Solid Medium Hit
- Running 150-155 Hz @ 6.5 V unloaded
- Pushing 3's to 9's with ease
- Weighs 6.45 Ounces
- MADE IN THE USA

Aaron Cain Roundback Shader Ver 2.0, based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

- New CNC Cut Iron Frame
- Durable Workhorse Red Oxide Finish
- Standard Workhorse Blackened Steel Hardware
- 1.25" 8 Wrap Black Heat Shrink Coils
- Long Stroke with a Medium Hit
- Running 100-105 Hz @ 6.5 V unloaded
- Pushing 5's to 11's no problem
- Weighs 6.45 Ounces
- MADE IN THE USA

Each spring set includes: fully punched 18 gauge front and rear springs.

Aaron Cain Liner Spring Set: All Aaron Cain Liners
Aaron Cain Shader Spring Set: All Aaron Cain Shaders
Aaron Cain 5brid Spring Set: Aaron Cain 5brid Liner/Shader

Aaron Cain x Mike Pike Custom Carved Jonesy Liner!

• Mike Pike CNC Cut Billet Brass Frame
• Biomech Carved Frame and Parts by Aaron Cain!
• Deluxe Blackened Cain Hardware
• Over Under Rear Binder Setup
• Custom Coin Wingnuts
  
• 1" 8 Wrap $5 Bill Coils
• Quick with a Medium Hit, Best for Smaller Work
  
• Running 145-150 Hz @ 6.5V Unloaded
• Pushing 3's-9's All Day
• Weighs 8 Ounces
• Limited Edition of 5
• MADE IN THE USA

New Adam Ciferri Bulldog Lapel Pins!

Rad illustration by Mike Giant of Adam Ciferri's Bulldogs he has been making since 1996. High quality 1.25" hard enamel gold lapel pins with military clutch.

Great accessory for any hat, bag, shirt, suit, purse, etc.....

Adam Ciferri Cast Iron Bulldog Shader Specs:
- Tuned for all-day, every-day street shop and/or custom tattooing
- Solid hit that easily pushes 5-15 Mag Groupings
- Runs 95-105Hz @ 6.5 Volts Unloaded
- Sand Cast Ductile Iron Frame
- Deluxe Blackened Textured Finish
- Blackened Workhorse Hardware
- 1.25" 8 Wrap Coils
- 8.5 ounce weight
- MADE IN THE USA

A few words from Adam on his history with this machine:
"In 1996 I started making machines known as "Bulldogs" with Mike Malone, as the previous builder of this classic machine had ceased making them, and there was a void to be filled. The idea for this was mine, and I ran it by Mike. He had asked me to build shaders for him to re-sell, as he was happy building liners and didn't feel much of an affinity for building shaders.

So, we embarked on our plan to start re-making the shader known as "the bulldog" and it was to be a partnership. Our partnership, like so many, had some snags, and in our haste to get the project rolling, we never nailed down some key details of the partnership. Predictably, we both made some serious mistakes, both professionally, and privately, and these mistakes ultimately led to some interesting interpretations and speculations of what my role was in making this machine.

I do not claim to own anything surrounding this machine but my work and my word.
I have made this machine, continually for nearly 20 years, and intend to continue making this machine for as long as this demand dictates.

Thank you, Workhorse Irons, for making this project happen, thank you Mike Malone for the opportunity to have a part in the lineage of this machine, and thank you, Fellow Tattooers, who buy my machines and allow me to do what I love."
Respectfully, Adam C