Features:

The Diamond Direct Drive Rotary

A collaborative project by Adam Ciferri and Mike Giant

Highlights:

• Aluminum Body
  
• Black Powder Coat Finish

Specifications:

• Running a versatile 4mm stroke
  
• Smooth black n grey or color blends at 4-5 volts
  
• Solid black and color packing at around 6 volts
  
• Outlines happen at around 7 volts
• Weighs 4 oz

Made in the USA

6 Layer coils

• One Pair
• Hand wrapped
  
• Not soldered
• No Capacitor. 
  
  Available as 1.25" Full Size and 1.125" Coils.

Deluxe Al Brodeur Workhorse Clip Cord - LIGHT WEIGHT VERSION

• High-End LW Cord, oxygen free, super flexible 
  
• Jacks are sealed, high quality, internally locking so the cord won't come loose 
  
• High Tension Flex Guaranteed to Hold Tight 
• Small Clips for those tight spaces
• Very low voltage loss 
  
• Clean Consistent Power - Machines run smoother and at lower voltage 
  

One Year Warranty - After a year we will still repair or replace at a minimal cost. 

Made in the USA

 Dan Kubin V3/24 Sidewinder!

Highlights:

• Polished Brass Frame with Black Hardware(*Finish may vary)
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)
• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot. There are three lines on the stroke wheel…shortest line is for shortest stroke / smaller groupings, the 3/4 line is middle of the road for medium stroke / medium to large groupings, full line is long stroke for large grouping work. You can’t make it too long or too short, play with it and find the right setting for the work you are doing.

Machine Setup:

• Standard Needle on Bar:
  • Needle Bar Tensioner - when setting up your needle and tube, position needle tensioner in desired position depending on the amount of tension you want to add to the needle bar. Adjust position by loosening the thumbscrew and then tightening when you reach desired tension. 
  • Rubber Band alternative setup - Loosen / remove thumbscrew to take the needle tensioner off. Then when setting up the machine, wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples. 
    
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane 
  

Description:

The most significant update to the V3/24 Sidewinder is the added (and optional) Needle Bar Tensioner. This added tensioner eliminates the need to use a Rubber Band, improving all around machine performance and results. Tensioner reduces spitting and increases power. These machines can be used with or without the Tensioner, it is detached by simply removing the thumbscrew and taking it off the machine. 

Aside from the added Needle Bar Tensioner, this new version of remastered V3 Sidewinder is dialed in and updated with various improvements to increase machine longevity and consistency. 

The V3/24 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan.  All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

$100 Gift Certificate

The Gift Card Code will be emailed to you.

Marv Lerning Springs

Each Spring Set Includes: Fully punched front and rear springs.

Liner- Metro Liner, 6 Liner
Shader- Metro Shader, 6 Shader

Cory Rogers Cracker Liner

Highlights:

• CNC Cut Iron Mini Liner Frame
  
• Blackened Finish
  
• Blackened Workhorse Hardware
  
• 8 Wrap 1" Workhorse Coils

Specifications:

• Medium Speed with a Hard Hit
  
• Great Liner for Traditional Work
  
• 130-135 Hz. @ 6 V unloaded
  
• Pushes 5s to 11s with Ease
  

Made in the USA

Good Judy Compostable Tattoo Machine Bag

Features:

Benefits:

Stainless Steel Springs

Includes one front or rear fully punched Stainless Steel 18 gauge front and rear springs. 

Stainless Steel Liner Medium Front

Spring Stainless Steel Short Rear

Stainless Steel Long Rear Spring

Stainless Steel Short Forked Rear