Heat Shrink-10 pack

10 Pack of Heat Shrink for 1.25" Full Size Coils

Joshua Bowers SC Bobber

Now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with Durable Black Anodize Finish
  
• Blackened Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord
  

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Designed for use with cartridges but is equally effective running needle and tube setup.
• Weighs 4 oz

Made in the USA

A few words from Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

LIMITED RUN OF CUSTOM Deluxe Workhorse Metered Power Supply

• Clean and Consistent Power
• Volts, Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 110 V US electrical plug or 220V EU electrical plug
• Comes with 3 Powerful Quarter Sized Magnets, Feet, and Desktop Stand
• Weighing in at 1 Pound
• Various Powder-coat finishes
• 4.25" x 3.6" x 1.35" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Desktop Stand - use included 3m adhesive to attach included magnets to back of power supply, then magnet the supply to the stand
• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

No corners were cut and no expenses spared; these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

Workhorse x Good Judy ECO Gripless Tubes

Traditional tube performance with a more environmentally conscious approach.

Developed in collaboration with Good Judy, these ECO Gripless Tubes are manufactured from compostable PLA, PBS, and mineral-based bioplastic and designed for use with reusable locking tattoo grips.

By separating the tube from the grip, artists can dramatically reduce waste while maintaining the feel, control, and precision of traditional tube and needle-on-bar tattooing. The system provides a familiar setup with the convenience of quick tube changes and reduced material waste.

Highlights

• Compostable PLA, PBS, and mineral-based bioplastic construction

• Designed for use with locking tattoo grips

• 20 Tubes Per Box

• Lightweight and precise

• Excellent needle stability and visibility

• Compatible with standard needle-on-bar setups

• Compatible with all major gripless tube locking grip systems

• Creates a completely traditional plastic-free tube and grip system when paired with reusable metal grips

• Made in collaboration with Good Judy

Available Configurations

Available in standard configurations for:

• Rounds

• Angled Rounds

• Diamonds

• Open Mags

• Closed Mags

Usage Information

For use with reusable locking grips.

Most artists will use a machine bag, pen cover, or barrier film over the grip, then apply grip wrap or cohesive bandage for comfort and control.

After use, reusable grips can be autoclaved, cold sterilized, or disinfected according to the manufacturer's recommendations. Tubes should be disposed of according to local regulations for tattoo waste. Industrial composting may be available in some municipalities, though acceptance of biohazard-related waste varies by location.

Why This System?

Developed with performance as the priority, these tubes were created to provide the stability, visibility, and control artists expect from traditional disposable tubes while reducing material waste.

When paired with reusable metal grips, the system eliminates traditional disposable plastic tube and grip waste while preserving the workflow many artists prefer.

Compostability / Biodegradability

Tubes

• CMA CG124 covered-in-vessel tested for decomposition in under 45 days

Packaging

• TÜV OK Compost Home Certified (TA8022105659)

• SGS PFAS (PFOA) Tested (TAOHG2000381701)

• Plastic-free

• Unbleached

• Compostable and recyclable

Packaging

The tubes are only part of the equation.

The packaging for these tubes is completely plastic-free, unbleached, PFAS-free, compostable, and recyclable, reflecting our shared commitment to reducing waste without compromising quality or performance.

Traditional tattooing. Modern eco-conscious thinking.

Please Note: Tubes are designed for use with locking grips. Grips sold separately.

Sharps Container (Quart)

• Non-tortuous lid design accommodates a variety of sizes of sharps
  
• Translucent lid for quick ID of fill level
  
• Each container locks for final disposal
  
• Nestable containers save space and reduce shipping costs
  
• Horizontal drop maximizes container volume
  
• Wall Mount/Free stand
  
• 1 Quart Size

Poly Apron

24"x42" (Box of 100)

These disposable aprons are constructed of strong, lightweight polyethylene. Each disposable apron is full coverage from chest to knees.

Adam Ciferri Cast Iron Bulldog Shader

A few words from Adam on his history with this machine:
"In 1996 I started making machines known as "Bulldogs" with Mike Malone, as the previous builder of this classic machine had ceased making them, and there was a void to be filled. The idea for this was mine, and I ran it by Mike. He had asked me to build shaders for him to re-sell, as he was happy building liners and didn't feel much of an affinity for building shaders.

So, we embarked on our plan to start re-making the shader known as "the bulldog" and it was to be a partnership. Our partnership, like so many, had some snags, and in our haste to get the project rolling, we never nailed down some key details of the partnership. Predictably, we both made some serious mistakes, both professionally, and privately, and these mistakes ultimately led to some interesting interpretations and speculations of what my role was in making this machine.

I do not claim to own anything surrounding this machine but my work and my word.
I have made this machine, continually for nearly 30 years, and intend to continue making this machine for as long as this demand dictates.

Thank you, Workhorse Irons, for making this project happen, thank you Mike Malone for the opportunity to have a part in the lineage of this machine, and thank you, Fellow Tattooers, who buy my machines and allow me to do what I love."
Respectfully, Adam C

Highlights:

• Sand Cast Ductile Iron Frame
• Deluxe Blackened Textured Finish
• Blackened Workhorse Hardware
• 1.25" 8 Wrap Coils

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Solid hit that easily pushes 5-15 Mag Groupings
• Runs 95-105Hz @ 6.5 Volts Unloaded
• Weighs 8.5 oz

Made in the USA

Deluxe Pilot Kit - NOW IN BRASS

We closed our Canadian branch early on during the extended lock-downs in Canada and we were unable to retrieve them or cross the border until recently. These are all brand new machines; they have just been sitting boxed up in Canada since the early days of Covid in 2020. They are dated 2018/2019 and run as they should with no wear or corrosion. Sales are final, but warranties still do apply. Kit includes all parts needed to build a nice tattoo machine...it does not however include the skills to build a nice tattoo machine, sorry.

Components:

• Cast BRASS Pilot Frame 
  
• Raw Brass Finish on Frame
  
• Workhorse Blackened Hardware 
  
• Armature Bar 
  
• Steel binding posts and standard contact screw 
  
• 2 Spring Sets with each kit
  
• 1.125" 6 Wrap Workhorse Coils for Liners or 1.125" 8 Wrap for Shaders, plus Capacitor Kit
  
• All Screws you'll need
  
• Washer Package including all washers needed... (steel, fiber, and shims)

*Picture is of the liner kit, the shader kit will come with appropriate hardware, coils and springs.

Made in the USA

Highlights:

• Workhorse Olive Green Powdercoat finish
  
• Push Button Constant On 
  
• Infinite Knob with Power Ranging From 1V to 15V
  
• Dual Programmable Clip Cord Options
  
• Will work with all Coil and Rotary Machines
  
• 110 V US electrical plug (220V EU Option Available)
  
• Clean and Consistent Power
  
• Weighing in at a mere 7 ounces
  
• 4.25" X 2.25" X 1.25" Steel Body
  
• 1 Year Warranty

No corners were cut and no expenses spared; these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.