Black Stallion Grey Wash

Quality ingredients mixed consistently to produce the smoothest, most beautiful gradations we have ever had the pleasure to lay our eyes on. Sounds a bit salesy, but it's true; we have been testing this formula for quite a while and we are very pleased with the results.

There are 5 colors....#1 being the lightest and #5 being pure darkness. Enjoy.

Workhorse Large O-Rings, ideal for use on the rear of an Armature Bar to dampen the hit and remove excess chatter.

Softer than standard Buna-N O-rings for a better seal in low-pressure applications, these are also resilient and offer excellent tear resistance. They resist hydraulic oils and motor oil. These O-rings have a round profile and are suitable for a wide range of static and dynamic sealing applications.

3/8 ID, 9/16 OD. 50A Soft Durometer.

Available in 10 packs or 100 packs.

Seth Ciferri Micro Jones Shader

- CNC Cut Iron Micro Jones Shader Frame
- Black Zinc Finish
- Seth Deluxe Black Hardware
- Seth Side Facing Guillotine Vise
- 1" 8 Wrap Workhorse Coils
- Medium Slow Speed with a Hard Hit
- Running 100-105 Hz @ 6 V Unloaded
- Pushing 5's to 15's All Day
- Weighs 7.2 Ounces
- MADE IN THE USA

A Few Words From Seth about this machine:
"these are the culmination of everything I've learned in more than 20 years of building machines, from a comfortable clip cord position, purposeful geometry, ease of maintenance, useful tube vise, to good balance, and everything else in between. they have a wide operating range, and are capable of pushing the big stuff with ease, or backing off for finesse when executing the most detailed and intricate work. I couldn't be happier with how they've turned out."

Joshua Bowers Big Can Rotary Tattoo Machine

 
A Few Words From Joshua about this machine:
Super smooth and consistent machine. Powerful through the whole stroke but designed to back off slightly in the middle and back end of the stroke to prevent overworking the skin. Super versatile, great for color saturation, blending, and even black and gray. Plenty of stroke to hang out for nice traditional whips or back it up and increase the voltage for smooth saturation. Has a penetrating stroke down to 4 volts which is great for stippling.

• 3 Piece Bolt-Up Body
• Black Zinc Finish
• Deluxe Brass Hardware
• Now with Bowers Brass Weighted Wingnut for better balance
• Weighing 4.75oz
• Runs best around 7-7.6 Volts
• Pushes any grouping with ease

MADE IN THE USA


Joshua Bowers Big Can Care Instructions

Joshua Bowers Rubber Band Placement Diagram

Joshua Bowers lightweight RCA Cord

Designed with function and maintenance in mind, this lightweight RCA Cord is made with the finest components ensuring a reliable and consistent connection.

• Light weight non-stick cord material
• High-grade Switchcraft Gold Right Angle Plug
• High-end matching Amphenol Plug
• 6 foot length
• Very lightweight at a mere 2.3 ounces
• Limited 1 Year Warranty covers product defects, not everyday wear and tear.

• MADE IN THE USA

 

 

*NOW WITH SWING GATE VISE! Guaranteed to lock tight on any tube.

SOBA Cast Iron Pilot Liners and Shaders:

After 20+ years of production, numerous machining updates and tuning tweaks, these are the longest running models we sell. With long forgiving geometry, these machines are the tried, true, and consistent Workhorses of tattooing. Built to last a lifetime with little muss or fuss. Great for apprentices figuring out the basics, as well as veterans looking for the feel and performance of an all around solid coil machine.

Liner Specs:
- Sand Cast Ductile Iron Frame
- Workhorse Red Oxide Finish
- Standard Workhorse Hardware
- 6 Wrap 1.125" Production Coils
- Long Frame Machine Allowing a Liners Point Gap, with a Long Stroke
- An All Around Outlining Tool....perfect for those long days of knocking out flash tattoos with speed and precision.
- Running 130-135 Hz @ 6.5 Volts Unloaded
- Pushes 3s to 11s Easy
- Weighing in at 7.5 oz
- MADE IN THE USA

Each Spring Set Includes: Fully punched front and rear springs.

Liner Spring Set- Carnivore Liner, Hater Liner

Shader Spring Set- Streamliner Shader           

Stainless Steel Liner Forked Rear- Carnivore Liner

Stainless Steel Liner- Hater Liner

 

Workhorse Needle Bar Grommets (100)

Kit Includes: SOBA’s Pilot frame, Shaders come with 1 pair of 8 wrap 1.25" coils and Liners come with 1 pair of 6 wrap 1.125" coils , appropriate armature bar, front and rear steel binding posts, contact screw, all washers including insulators, black, and magnetic steel shims, all screws, capacitor, cast iron wing nut, Allen wrench, and 2 sets of fully punched springs. Essentially everything needed to assemble a complete machine. Skills and instructions NOT included. MADE IN THE USA.

New Workhorse Needle and Tube Sample Packs! For the fedw of you out there that have not tried our Tubes and Needles, here is your chance to sample them without committing to a full box.

Each sample pack comes with a 2 mags, 2 Rounds, plus the corresponding Tubes. Available as either a Small/Medium Grouping sample pack or Medium/Large Grouping sample pack.

Workhorse Needles

We are proud to release these new, high quality textured Workhorse needles. We have been working towards this for quite some time now and we are very happy with the quality of these needles, we are certain these new needles vastly outperform any pre-made we have offered in the past.

Better consistency, better configuration, and more quality checks in production, ensuring a much higher quality needle guaranteed to work well for every tattoo. Plus unlike most needles available, ours are made with lead free solder in proper working environments.

• High Quality #12 Needles on all Traditional
• Loose groupings / #10 Bugpin on all groupings listed as Tight

Workhorse Disposable Tubes

We have been producing our High Quality Workhorse Disposable Tubes for about 7 years now and work closely with the plastic molding company to ensure consistency and overall product quality. Basically tubes that are the right size with proper plastic that doesn't snap or vibrate too much.

• Custom Design with Ergonomic Feel
• 1.125" Olive Green Soft Grip
• High Density Rubber overlaying Silicone that is molded onto the tube, no slipping/spinning
• Clear Tubes and Tips to easily view ink and needles
• Available as Rounds, Diamonds, or Mags - Box of 20 Disposable Tubes
• Individually packaged in blister packs and sterilized by Ethylene Oxide Gas

These Tubes are as solid as they come...they are highly durable, feel great in the hand, and fit tubes better then any other disposables on the market.

As with all of our products that we offer, these needles are designed by tattoo artists for tattoo artists....they are not the typical overproduced chinese shit needles the other suppliers carry.

Better tools make better tattoos.

We decided to pour some Hand Sanitizer to help get more out there for those that need some. We are currently only offering these 2 oz bottles in SIX PACKS as we are still partially closed and short handed. Each order will have a total of 12 ounces of Hand Sanitizer.

Specs:

• Ingredients: Ethyl Alcohol 70%, Aloe Barbadensis Leaf, Carbomer, Dimethicone, Triisopropanolamine, Water
• 2 oz Bottle with Twist Top
• Made from plant based Ethanol with a mild lavender scent
• Made in the USA
   

SANITIZER CONTAINS ALCOHOL WHICH MAY BE DRYING TO THE HANDS. PLEASE KEEP OUT OF REACH OF CHILDREN. DO NOT INGEST HAND SANITIZER IS FLAMMABLE AND RAGS SOAKED IN HAND SANITIZER WILL BE FLAMMABLE. RAGS OR GARMENTS SOAKED IN HAND SANITIZER SHOULD NOT BE DRIED IN A DRYER EVEN AFTER BEING WASHED. OTHER WARNINGS APPLY AND WILL BE POSTED ON PRODUCT LABELS. 

Seth Ciferri Light Weight Weiner Dog Liner 2.1

Extremely Lightened Weiner Dog 2.1 CNC Iron Frame. Liners weigh a mere 5.5 ounces

- New Improved Geometry providing a very powerful hit from a very small machine
- Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
- Standard Workhorse Red Oxide Finish
- Black Workhorse Hardware and Coin Thumbscrew
- 1" 8 Wrap Workhorse Coils Plus Capacitor Strap
- Medium Speed with a Hard Hit To push Larger Groupings
- Running 130-135 Hz @ 6 V Unloaded
- Pushing Loose 5's to Loose 11's Easy
- MADE IN THE USA

Mike Pike Half Cup Liner

- CNC Cut Iron Frame with PIKE Stamp
- Workhorse Red Oxide Finish
- Standard Blackened Workhorse Hardware
- 1" 8 Wrap Black Heat Shrink Mini Coils
- Liners are Very Quick with a Medium Hit
- Running 145-155Hz @ 6.5 V Unloaded
- Pushing 3's-9's Easy
- Weighing a Mere 6.5 Oz
- MADE IN THE USA