Mike Pike Half Cup Liner

- CNC Cut Iron Frame with PIKE Stamp
- Workhorse Red Oxide Finish
- Standard Blackened Workhorse Hardware
- 1" 8 Wrap Black Heat Shrink Mini Coils
- Liners are Very Quick with a Medium Hit
- Running 145-155Hz @ 6.5 V Unloaded
- Pushing 3's-9's Easy
- Weighing a Mere 6.5 Oz
- MADE IN THE USA

Sharps Container (Gallon)
- Non-tortuous lid design accommodates a variety of sizes of sharps
- Translucent lid for quick ID of fill level
- Each container locks for final disposal
- Nestable containers save space and reduce shipping costs
- Horizontal drop maximizes container volume
- Wall Mount/Freestand
- 1 Gallon Size

Dan Kubin Replacement Accessory Kit includes the following:

• 1.5MM Allen Key
• 5/64" Hex Key
• Taper Pin (used to open up/ensure your needle bar loop is the correct size)
  
• Dan Kubin Universal Sidewinder Spring
• 20 Dan Kubin Perfect Nipples

*Spring Sale $75 off Limited Time Only*

Dan Kubin V3R Sidewinder

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Limited Verdigris Patina Brass Frames (*Finish may vary)
  
• 24k Gold Plated Parts and Motor Cap
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

New V4 Adam Ciferri Ghost Dog Shader Hybrid

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's...also able to push very large groupings if you bump the volts up a bit
  
• Runs 110-115 Hz @ 6.5 Volts Unloaded
• Good for Color Packing or Color Blends
• CNC Cut Iron with the highest precision and care
• 1" Custom Keg Coil
• Standard Workhorse Red Oxide Finish
• Standard Workhorse Blackened Hardware
• Weighs 6 oz
• MADE IN THE USA

A few words from Adam about this machine:
"The Ghost Dog Shader is tuned for all-day, every-day street shop and/or custom tattooing. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

9-3/4" Metalmaster® Compound Action Snips. Cuts straight, left, and right. Non-slip serrated jaws cut spring stock with ease.

Workhorse Aprons done in Collaboration with Sidnaw Company (formerly Mercy Supply)!

Handcrafted locally by renowned Marcy Supply artisan Rusty Zylstra, these Workhorse exclusives are designed specifically for use in tattooing. These new Leg Aprons offer an excellent alternative to wearing a full apron while still protecting your pants from ink, blood, and other pathogens....no more ruined clothes!

Apron Details:
- Long cut to ensure your knee stays covered when seated
- 10 oz waxed canvas made in the USA and strong enough to withstand the strongest disinfectant sprays and wipes....simply wipe down with your favorite disinfectant to kill anything between tattoos
- Hand hammered solid copper rivets
- 5 oz durable, adjustable leather straps that fastens on the side like a belt would, plus a convenient quick release option
– excess strap can be tucked back in behind the brass buckle or cut off
- Solid brass buckles
- Finished with canvas trim around all edges
- Reversible for use with either your right or left leg

*DO NOT PUT IN WASHING MACHINE, DO NOT DRY CLEAN, SPOT CLEAN ONLY.

Dan Kubin V3R Sidewinder

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Black Oxide Brass Frame with Custom Distressed Finish(*Finish may vary)
• Blackened Parts and Motor Cap
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

Tattoo Machine Bags (Box of 500)
5" x 5" poly bags

Washers - Pack of 10

Standard Disposable Cartridge Grip fits our Non-Membrane Cartridges perfectly and is ergonomically comfortable with a 1.125" Soft Rubber. 10 Grips per box.

As with all of our products that we offer, these cartridges are designed by tattoo artists for tattoo artists.

Better tools to make better tattoos.

Stainless Steel V3r "23" Sidewinder Spring- New stainless steel main spring for all "23" model sidewinders. 

Stainless Steel V3r Sidewinder Spring - Updated spring used on 2020 to 2022 sidewinders. Slightly different shape with a flat rear end of the spring.

OG Sidewinder Spring - From the original V3R sidewinder (2019-2020). Used for both the pivoting and rear stoke spring.  Also can be used for v3, v4, and v5. Original rounded rear end of the spring.

Ghost Dog Revival Spring - For the Dan Kubin X Adam Ciferri Ghost Dog Revival. Stainless steel front and backer spring included.

New Deluxe Foam Cartridge Grip fits our Membrane Cartridges perfectly and is ergonomically comfortable with a 1.5" Soft Foam. 24 Grips per box.

These work best with our Membrane Cartridges.

As with all of our products that we offer, these cartridges are designed by tattoo artists for tattoo artists.

Better tools to make better tattoos.