Dan Kubin Mojobox V2.2 - Pink
Dan Kubin Mojobox V2.2 - Pink
Dan Kubin Mojobox V2.2 - Pink
Dan Kubin Mojobox V2.2 - Pink
Workhorse Irons

Dan Kubin Mojobox V2.2 - Pink

$850.00 USD

Dan Kubin Mojobox V2.2

Newly remastered, this is the 2nd variant of the 2nd generation of the Mojobox. New spring setup that enhances performance, punch, adjustability, and makes it more cartridge friendly!

Now with more versatility and ease of hit adjustment throughout the tattoo. It is more ergonomic, more reliable, and most of all, more performance focused than its predecessor. It is a punchy coil like machine with the reliability and ergonomics of a rotary.

Highlights:

  • Brass Frame with Pink HD Finish
  • Numbered upstroke wheel (same as the V3r). The higher the number, the harder it will hit.  *Please use common sense & not run it on high volts with a high setting on the upstroke wheel.
  • Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive which is the nature of a cartridge.

Specifications:

  • Normal operating range: 5.3 - 6 volts for lining, 4 - 5.5 volts for shading.
  • Excellent for fine line, black and grey, color packing with any size mag.
  • Can drive 14 liners, if you prefer to “set the needle into the skin”
  • Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive, which is the nature of a cartridge.
  • Weight: 5 oz

Made in the USA




Customer Reviews

Based on 2 reviews Write a review

You may also like

Sold Out
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
Workhorse Irons
$795.00 USD
Dan Kubin Sidewinder 46er - Black x Gold
Dan Kubin Sidewinder 46er - Black x Gold
Workhorse Irons
$1,100.00 USD
Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
Workhorse Irons
$685.00 USD
Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
Workhorse Irons
$995.00 USD
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
Workhorse Irons

New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold

$795.00 USD

Dan Kubin X Adam Ciferri Ghost Dog Revival V2!

Updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, PLUS an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

Highlights:

  • CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
  • CNC Cut Iron with the highest precision and care for superior conductivity
  • Hinge / Compression machine functionality eliminating any rear spring issues or breakage
  • Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
  • Custom 24k Gold Plated Finish
  • Deluxe DK 24k Gold Plated Hardware

Specifications:

  • Tuned for all-day, every-day street shop and/or custom tattooing
  • Medium speed with enough hit to push 3's to 14's no problem
  • Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
  • Weighs 6 oz

    Machine Setup:

    • Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
    • Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
    • Cartridges: possible, but not highly recommended.

    Made in the USA

    "Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

    There have been many things I’ve learned from the original Revival, along with many more years experience with the compression spring/bearing pivot. Combine that with a superior magnetic circuit that Adam and Workhorse have dialed in, and you get something quite magical. We are very pleased with the performance, versatility, and ergonomics of this machine.
    It’s functional voltage range starts at around 4.5 volts and keeps going up without chatter or excessive heat. With the engineering that went into the spring setup, the user does not have to settle for squishy nipples to prevent their springs from breaking.
    This machine comes stock as a strong, medium speed liner (or fast shader) at around 105-110 cps loaded (about 125-130 cps unloaded). Because of the large voltage range, it is capable of all size needle groupings. (*the contact screw can be backed out to run in the 90 cps range as well). For a slappier, punchier hit, the backer spring under the contact spring can be removed.
    I have put much attention into the weight distribution, to put the weight forward and low, providing superior stability, and preventing wrist fatigue.

    Ladies and gentlemen, the Ghostdog Revival!"

    Thanks - Dan.

      Customer Reviews

      Based on 2 reviews Write a review
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Workhorse Irons

      Dan Kubin Sidewinder 46er - Black x Gold

      $1,100.00 USD

      Dan Kubin's Newest Sidewinder, the V46er!


      The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.
      This machine is very strong off the tip with a great follow-through. Its number one purpose is as a strong, precise, off the tip liner; though it has proven to be much more capable.


      Highlights:
      • BLACK HD POWDER COAT FRAME + 24k Gold Plated Gold Parts and Hardware
      • Rustic beauty at its finest!  Verde patina copper with a durable baked-on lacquer protective coating. Finish may vary as this is a very unique custom patina.
      • Wider springs for more durability.
      • Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
      • Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
      • Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
      • Smooth, easy clamping tube vice.
      • Forward weight distribution for better ergonomics.
      • 24k Gold Plated Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.  
      • O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
      • Reliable Mabuchi motor. -because they run forever without losing consistency. 
      Specifications:
      • Recommended voltage range: 4 - 6.5 volts
      • Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs.  The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)
      • Polarity: Positive up - spins motor clockwise - slaps harder, ideal for large grouping liners. Positive down - spins motor counterclockwise -slightly passive hit, ideal for shading and fine line
      • Weighs 6 oz
      Made in the USA

      Customer Reviews

      Based on 2 reviews Write a review
      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
      Workhorse Irons

      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel

      $685.00 USD

      V2 Dan Kubin X Adam Ciferri Ghost Dog Revival Hybrid

      Updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, PLUS an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

      Highlights:

      • CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
      • CNC Cut Iron with the highest precision and care for superior conductivity
      • Hinge / Compression machine functionality eliminating any rear spring issues or breakage
      • Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
      • Custom Polished Nickel Plated Finish
      • Deluxe DK Blackened Hardware and Spring

      Specifications:

      • Tuned for all-day, every-day street shop and/or custom tattooing
      • Medium speed with enough hit to push 3's to 14's no problem
      • Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
      • Weighs 6 oz

        Machine Setup:

        • Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
        • Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
        • Cartridges: possible, but not highly recommended.

        Made in the USA

        "Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

        There have been many things I’ve learned from the original Revival, along with many more years experience with the compression spring/bearing pivot. Combine that with a superior magnetic circuit that Adam and Workhorse have dialed in, and you get something quite magical. We are very pleased with the performance, versatility, and ergonomics of this machine.
        It’s functional voltage range starts at around 4.5 volts, and keeps going up without chatter or excessive heat. With the engineering that went into the spring setup, the user does not have to settle for squishy nipples to prevent their springs from breaking.
        This machine comes stock as a strong, medium speed liner (or fast shader) at around 105-110 cps loaded (about 125-130 cps unloaded). Because of the large voltage range, it is capable of all size needle groupings. (*the contact screw can be backed out to run in the 90 cps range as well). For a slappier, punchier hit, the backer spring under the contact spring can be removed.
        I have put much attention into the weight distribution, to put the weight forward and low, providing superior stability, and preventing wrist fatigue.

        Ladies and gentlemen, the Ghostdog Revival!"

        Thanks - Dan.

          Customer Reviews

          Based on 2 reviews Write a review
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Workhorse Irons

          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel

          $995.00 USD

          Dan Kubin's Newest Sidewinder, the V46er!


          The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.
          This machine is very strong off the tip with a great follow-through. Its number one purpose is as a strong, precise, off the tip liner; though it has proven to be much more capable.

          Highlights:
          • Antique Nickel Plated Frame and Matching Motor Cover with Blackened Deluxe DK Components
          • Wider springs for more durability.
          • Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
          • Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
          • Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
          • Smooth, easy clamping tube vice.
          • Forward weight distribution for better ergonomics.
          • Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.  
          • O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
          • Reliable Mabuchi motor. -because they run forever without losing consistency. 

          Specifications: 
          • Weighs 6 oz
          • Recommended voltage range: 4 - 6.5 volts
          • Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs.  The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)
          • Polarity: Positive up - spins motor clockwise - slaps harder, ideal for large grouping liners. Positive down - spins motor counterclockwise -slightly passive hit, ideal for shading and fine line
          Made in the USA

          Customer Reviews

          Based on 2 reviews Write a review
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Workhorse Irons

          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord

          $995.00 USD

          Dan Kubin's Newest Sidewinder, the V46er! 

          The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.
          This machine is very strong off the tip with a great follow-through. Its number one purpose is as a strong, precise, off the tip liner; though it has proven to be much more capable.

          Highlights:
          • Antique Nickel Plated Frame and Matching Motor Cover with Blackened Deluxe DK Components.
          • Wider springs for more durability.
          • Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
          • Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
          • Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
          • Smooth, easy clamping tube vice.
          • Forward weight distribution for better ergonomics.
          • Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.  
          • O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
          • Reliable Mabuchi motor. -because they run forever without losing consistency. 
          Specifications:
          • Weighs 6 oz
          • Recommended voltage range: 4 - 6.5 volts
          • Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs.  The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

          RCA Specifications:

          • RCA version is wired for the harder hit mode only using RCA connection
          • This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
          • This will also work good with a right-angle RCA cord.
          • Clip Cord option still works, it is just wired backwards (Positive Down for Harder Hit)
          • The position of the battery makes the machine’s balance point much more forward, like a pen.
          • NEW RCA / Clip cord version with straight up battery position 

          Made in the USA


          Customer Reviews

          Based on 2 reviews Write a review
          Next: Dan Kubin Mojobox V2.2 - Nickel
          Back to Dan Kubin
          Next: Dan Kubin Mojobox V2.2 - Nickel