DK Offset Cartridge Grip! 

The offset helps put the machine over the top of the user’s hand, making it more ergonomic and easier to keep the machine upright when pulling those large square looking lines.

• TWO Versions Available: 
  
  • Heavy Weight 1.25" BRASS Grip and Stainless Steel backstem (8oz)
  • Feather Weight 1.25" ALUMINUM Grip and Stainless Steel backstem (2.75oz)
• Brass is heavier but absorbs vibration more and offsets the pull of a clip cord and or any ass end tattoo machine weight, balancing more over the hand
• Aluminum is much lighter and pairs well with use of a battery to reduce overall weight. Balance is a bit better with the Brass version, but it is a trade off for weight. 
• Offset for better balance and visibility 
• Made of naturally anti-microbial Brass
• Please cover with barrier film for extra protection!
• Made in the USA by Dan Kubin 

Better tools to make better tattoos.

December is an expensive month, as a thanks for your continued business and support all items on the Holiday Sale page are 20% OFF the lowest listed price!

20% OFF DISCOUNT APPLIES IN CART!  No Code Needed. Sale goes through the end of the year.

Order by 12 pm Noon December 20th with Next Day Air shipping method to receive by Christmas!

Limited Edition SOBA Speedballer Liner 

• OG CNC Cut Iron Speedballer Frame
  
• Ferrari Red HD Powder Coat Finish
  
• Deluxe Blackened Hardware
• Custom 1" 8 Wrap Reflective Coils with Custom SOBA Washers
  
• Medium Speed with a Solid Hit
• Pushing 3's to 11's no problem
  
• Running 130 Hz @ 6.5 V Unloaded
• Weighs in at 6 oz
• MADE IN THE USA

• Clean and Consistent Power fed through an internal rechargeable battery
  
• 10-12 Hour Battery Runtime
• Runs off battery power or corded power
• Usable while charging with built in smart charge programming
• Large Volt Readout with smaller Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 2 to 14 Volt Output
• 5 Amp Max Peak Output at 50% Duty
• 110 V US electrical plug or 220V EU electrical plug
• 4-cell lithium ion battery with a 47 Watt hour rating (2800mAh at 16.8V)
• Comes with 4 Powerful Quarter Sized Magnets, Feet, and optional Stand
• Weighing in at 1.25 Pound
• HD Black Powdercoat finish
• 4.5" x 3.6" x 1.5" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

No corners were cut and no expenses spared, these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

**Obviously does not include clip cord, foot switch, or tattoo machine. We do have numerous options of each of these items if you are in need of one or all of the above. Thanks for looking!

NEW Dan Kubin V3/24 Sidewinder!

The most significant update to the V3/24 Sidewinder is the added (and optional) Needle Bar Tensioner. This added tensioner eliminates the need to use a Rubber Band, improving all around machine performance and results. Tensioner reduces spitting and increases power. These machines can be used with or without the Tensioner, it is detached by simply removing the thumbscrew and taking it off the machine. 

Aside from the added Needle Bar Tensioner, this new version of remastered V3 Sidewinder is dialed in and updated with various improvements to increase machine longevity and consistency. 

The V3/24 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

Machine Specs:

• HD Green Apple Powder Coated Brass Frame with Nickel Plated Hardware and Motor Cover
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar:
  • Needle Bar Tensioner - when setting up your needle and tube, position needle tensioner in desired position depending on the amount of tension you want to add to the needle bar. Adjust position by loosening the thumbscrew and then tightening when you reach desired tension. 
  • Rubber Band alternative setup - Loosen / remove thumbscrew to take the needle tensioner off. Then when setting up the machine, wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples. 
    
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website.