Mike Pike x Ernie Carafa Cast Iron FRAME

Very special collaborative frame designed and cast in Iron by Mike Pike and Ernie Carafa years ago, recently found and pulled from rusty buckets, cleaned up, cnc milled with collet vises brazed in.

These are very limited and once they are gone they will forever be gone. 

As described by Mike Pike:

”I think it was around 2003 or 2004 Ernie wanted to make up some of these cast frames he made up a drawing and a buddy of mine that worked at the foundry in downtown LA made the match plate . Ernie was a good guy, and it was kind of like a tribute to him. It literally took forever for the guy to get the frames done and then milling was going to be done by another guy that had all the Frames but ended up passing away and then I mailed some in the garage and Ernie milled some and we built them up . He wanted to make he wanted to make the castings kind of thick to where they could be mailed to take any size coil and have a lot less draft angle than the ones that he did with Paul Rogers”

Frame Specs:

• Cast Iron Frame
• Raw Oiled Finish
• Brazed Collet Vise
• Forward facing wingnut that won't ride your hand or get in the way
• Welded Cast Iron Wingnut Thumbscrew Included

Typical Machine Specs when built by Mike Pike:

• Typically Built as a Long Stroke Liner....can be built as a Shader or Hybrid as well
• Slow Speed with a Solid Hit
• Running 125-130 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 11s

Made in the USA by Mike Pike

BLACK FRIDAY Seth Ciferri Mini Flatside Frame

• CNC Cut Iron Liner Frame
  
• Designed by Seth Ciferri
  
• Black Oxide Finish
• Geometry for 1" Coils
• Forward Facing Guillotine Vise
  
• Vise Parts Included
• Weighs 2.9 oz

Made in the USA

*Special Edition Black Friday Machine Kit at special pricing! Not typically offered special edition Juan Puente Tattoo Machine Kits, plus optional armature bar fixture and alignment tool!

Juan Puente OG Liner Machine Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Iron Juan Puente Frame
• Blackened Finish
• Deluxe Blackened Hardware
• Swing Gate Vise Guaranteed to lock tight on any tube
• 1.25" 6 Wrap Custom Soldered Coils
• Liner Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a phillips screw driver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Liner typical specs:

• Medium Speed with a Solid Hit
• 140-145 Hz at 6.5 V Unloaded
• Weighs 7.2 Ounces
  
• Pushing 3-11's Easy

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Limited Deluxe Seth Ciferri Mini Flatside Liner Kits!

Kit includes all parts needed to build a great tattoo machine...but it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut ALUMINUM Mini Flastside Frame
• Black Anodized Finish
• Deluxe Blackened Hardware
• Front Loading Guillotine Vise
• 1" 8 Wrap Custom Soldered Coils
• Armature Bar
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
  
• Weighs 6 oz

Liner typical specs:

• Medium Slow Speed with a Medium Hard Hit
• Running 130-135 Hz @ 6 V Unloaded
• Pushing 5's to 11's No Problem

Shader typical specs:

• Medium Speed with a Hard Hit
• Running 105-110 Hz @ 6 V Unloaded
• Pushing up to 13's Easy

Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

*Special Edition Black Friday Machine Kit at special pricing! Never before offered Zephyr Combo Tattoo Machine Kits, plus optional armature bar fixture!

Cory Rogers Zephyr Machine Kit - COMBO Kit includes one full size frame with geometry to build and setup the machine as either a Liner or Shader. Kit includes both Liner and Shader Armatures and Springs. 

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Full Size Iron Zephyr Frame
• Blackend Finish
• Deluxe Blackened Hardware
• 1" 8 Wrap Custom Soldered Coils plus 1/4" Yoke
  
• Liner and Shader Armature Bar Included 
  
• 2 Liner and Shader Spring Sets
  
• All Screws you'll need PLUS necessary wrenches 
  
• Washer Package including all washers needed (steel, fiber, and shims)

Liner typical specs:

• Medium Fast Speed with a Solid Hit
• Great Liner for Traditional Work
• 135-140Hz. @ 6.5 V unloaded
• Pushes 5s to 11s Easy
• Weighs 6.75 oz

Shader typical specs:

• Slow Speed with a Hard Hit and Long Stroke
  
• Great Shader for Traditional Work
• 100-105 Hz. @ 6.5 V unloaded
• Pushes 5s to 15s Easy
• Weighs 6.75 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.