Newly remastered, this is the 2nd variant of the 2nd generation of the Mojobox. New spring setup that enhances performance, punch, adjustability, and makes it more cartridge friendly!
Now with more versatility and ease of hit adjustment throughout the tattoo. It is more ergonomic, more reliable, and most of all, more performance focused than its predecessor. It is a punchy coil like machine with the reliability and ergonomics of a rotary.
Highlights:
Brass Frame with High Polish Nickel Plated Finish and 24k Gold Plated Parts
Numbered upstroke wheel (same as the V3r). The higher the number, the harder it will hit. *Please use common sense & not run it on high volts with a high setting on the upstroke wheel.
Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive which is the nature of a cartridge.
Specifications:
Normal operating range: 5.3 - 6 volts for lining, 4 - 5.5 volts for shading.
Excellent for fine line, black and grey, color packing with any size mag.
Can drive 14 liners, if you prefer to “set the needle into the skin”
Intended for standard needle on bar. For cartridges, you may use a rubber band to negate the tension by pulling the rubber band over the top of the armature. Needle on bar will have more hit and cartridges will be slightly subdued and less aggressive, which is the nature of a cartridge.
Weight: 5 oz
Made in the USA!
All DK Machines sold by Workhorse are engineered, designed, and tested by Dan, milled in his most trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All MOJOBOX go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current MOJOBOX are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Dan Kubin Sidewinder v7.5 - Polished Nickel w/ Ebony
Regular price$1,050.00 USD
Dan Kubin Sidewinder v7.5
The main goal for this batch is for simple tuning, but with the option to dial it precisely for those who know how they want their machine to run. Considered by some to be the most revolutionary Sidewinder yet.
Highlights:
Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine. Impact screw is also adjustable for precise tuning.
Straight angle on drive spring shelf on the armature bar, allowing for a more effortless and graceful hit.
Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine.
More prominent timing marks on the side plate for the impact pin. (for advanced tuning/stroke adjustment, this helps with being more intuitive)
Cleaner sound/better acoustics.
Side locking screw is positioned to secure the impact screw most effectively
Specifications:
Forward, low and balanced weight of 6.2 oz
Recommended voltage range: 4 - 6.5
Great in the lower volt range for shading to color packing, fine line and stippled whip shading techniques.
It has 5 stroke positions ranging from 3.5-4mm. While tattooing, hit is controlled with adjustable return spring tension. If you want a softer hitting machine, you don’t have to compromise the stroke length. You can simply adjust the return spring tension on the fly throughout the tattoo.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Step up your tattoo game with the new DK MCi – a plug-and-play remastered version of Dan's Mini Cranker from 2011. Updated and refined, it's designed for precision and ease of use, whether you're using a needle on bar or cartridges. With its wide range of versatility and solid hit, it's a must-have for any tattoo artist.
Highlights:
Steel Frame with 24k Gold Plated Frame and Hardware
Weighted Brass Armature
Deluxe Kubin Components including DK Thumbs and updated Slide Vise
Great for Lining and Shading with small to medium groupings, turn voltage up and down for speed and hit adjustment as needed
Higher voltage between 5 - 7 Volts for most Lining
Lower Voltage between 3.5 - 5 Volts for most Shading, Color Packing, and Stipple Work
Setup / Specifications:
Works well with Standard Needle on Bar AND with Cartridges
Possible to run with Cartridges without any adjustment or tricks, but if you pull your rubber band over the armature it will increase the snap at the tip
This machine is cartridge friendly, but best to use lower tension cartridges if going that route. (Workhorse Eco Carts and Non Membrane Carts work well with these machines)
Polarity is not crucial, but will run slightly more efficiently with Positive Down
The impact screw can be backed off all the way, but ideal to still have a little impact to reduce motor shaft strain
Turning the impact screw in too much will result in stalling the machine or putting too much strain on the motor.
Ideal impact is about 1/4-1/2 turn clockwise from the point of zero impact.
Use and Care:
Please refer to the MCi setup video on my YouTube channel for further clarification - See Link Below
After a few years, the bearings may dry up. You may use A SINGLE DROP of sewing machine oil on the bearings. DO NOT FILL THE MOTOR WITH OIL!!
Keep sterilants away from all moving and electrical components! Sterilants are corrosive and will damage your machine if used carelessly.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All MCI machines go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current MCIs are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Step up your tattoo game with the new DK MCi – a plug-and-play remastered version of Dan's Mini Cranker from 2011. Updated and refined, it's designed for precision and ease of use, whether you're using a needle on bar or cartridges. With its wide range of versatility and solid hit, it's a must-have for any tattoo artist.
Highlights:
Steel Frame with durable Antique Nickel Plated Finish
Weighted Brass Armature
Deluxe Kubin Components including DK Thumbs and updated Slide Vise
Great for Lining and Shading with small to medium groupings, turn voltage up and down for speed and hit adjustment as needed
Higher voltage between 5 - 7 Volts for most Lining
Lower Voltage between 3.5 - 5 Volts for most Shading, Color Packing, and Stipple Work
Setup / Specifications:
Works well with Standard Needle on Bar AND with Cartridges
Possible to run with Cartridges without any adjustment or tricks, but if you pull your rubber band over the armature it will increase the snap at the tip
This machine is cartridge friendly, but best to use lower tension cartridges if going that route. (Workhorse Eco Carts and Non Membrane Carts work well with these machines)
Polarity is not crucial, but will run slightly more efficiently with Positive Down
The impact screw can be backed off all the way, but ideal to still have a little impact to reduce motor shaft strain
Turning the impact screw in too much will result in stalling the machine or putting too much strain on the motor.
Ideal impact is about 1/4-1/2 turn clockwise from the point of zero impact.
Use and Care:
Please refer to the MCi setup video on my YouTube channel for further clarification - See Link Below
After a few years, the bearings may dry up. You may use A SINGLE DROP of sewing machine oil on the bearings. DO NOT FILL THE MOTOR WITH OIL!!
Keep sterilants away from all moving and electrical components! Sterilants are corrosive and will damage your machine if used carelessly.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All MCI go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current MCI are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Step up your tattoo game with the new DK MCi – a plug-and-play remastered version of Dan's Mini Cranker from 2011. Updated and refined, it's designed for precision and ease of use, whether you're using a needle on bar or cartridges. With its wide range of versatility and solid hit, it's a must-have for any tattoo artist.
Highlights:
Steel Frame with durable Rubbed Bronze Plated Finish
Weighted Brass Armature
Deluxe Kubin Components including DK Thumbs and updated Slide Vise
Great for Lining and Shading with small to medium groupings, turn voltage up and down for speed and hit adjustment as needed
Higher voltage between 5 - 7 Volts for most Lining
Lower Voltage between 3.5 - 5 Volts for most Shading, Color Packing, and Stipple Work
Setup / Specifications:
Works well with Standard Needle on Bar AND with Cartridges
Possible to run with Cartridges without any adjustment or tricks, but if you pull your rubber band over the armature it will increase the snap at the tip
This machine is cartridge friendly, but best to use lower tension cartridges if going that route. (Workhorse Eco Carts and Non Membrane Carts work well with these machines)
Polarity is not crucial, but will run slightly more efficiently with Positive Down
The impact screw can be backed off all the way, but ideal to still have a little impact to reduce motor shaft strain
Turning the impact screw in too much will result in stalling the machine or putting too much strain on the motor.
Ideal impact is about 1/4-1/2 turn clockwise from the point of zero impact.
Use and Care:
Please refer to the MCi setup video on my YouTube channel for further clarification - See Link Below
After a few years, the bearings may dry up. You may use A SINGLE DROP of sewing machine oil on the bearings. DO NOT FILL THE MOTOR WITH OIL!!
Keep sterilants away from all moving and electrical components! Sterilants are corrosive and will damage your machine if used carelessly.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All MCI go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current MCI are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
These turned and knurled brass thumb screws add weight to the front of your machine helping with balance, vibration and needle penetration. Drilled and tapped 8-32 on the edge and through the center to give you two mounting options, they will replace most standard wing nuts. Adding weight to the front of the machine allows the needle to push against that mass as it drives down to the skin, giving you an advantage for more solid, stable lines and allowing you to not have to hold your machine so tight.
Workhorse Irons
DK Swift Tips - 13 Mag (Box of 24 Tips)
Regular price$28.00 USD
New DK Swift Tip System!
This is a new and convenient way to use standard needles with a metal grip to maintain the rigid feel and counterweight of a steel tube. If setup correctly, this system allows for a proper barrier from cross contamination without use of an autoclave. It is still recommended to wipe the grip with a sterilant between uses as you would your workstation.
Quick and easy setup for standard needle on bar use with much less vibration than standard disposable tubes. Less vibration means less harm to your hands, tendons, and overall body stress for greater longevity and health.
Utilizing a metal grip and small click in plastic tips, this system creates much less waste...about 95% less plastic than most disposable grips!
DK Swift Tips - 13 Mag - Box of 24 Tips (Grip Not Included)
*Must be used with DK Swift Tip Grip
These tips have great visibility and come to a nice point. The biggest benefit is being able to see more needle even when you don't have a lot of needle hanging out.
The shape of the mag tip allows for mor visibility at the end of the tip. The side wall is beveled back so there is no excess material on the edges. This allows for getting a more precise "cut in" near lines and tight spaces.
Fits 9 mags.
These tips are hydrophobic and have an antimicrobial additive in them. That said, you may need to check with your local health dept for protocol on single use plastic products used in the tattooing process. (such as ink caps)
*Blister packaged tips coming soon
Made in house at DK Rotary in Kansas City MO, USA
Better tools to make better tattoos.
Workhorse Irons
DK Swift Tips - 11 Mag (Box of 24 Tips)
Regular price$28.00 USD
New DK Swift Tip System!
This is a new and convenient way to use standard needles with a metal grip to maintain the rigid feel and counterweight of a steel tube. If setup correctly, this system allows for a proper barrier from cross contamination without use of an autoclave. It is still recommended to wipe the grip with a sterilant between uses as you would your work station.
Quick and easy setup for standard needle on bar use with much less vibration than standard disposable tubes. Less vibration means less harm to your hands, tendons, and overall body stress for greater longevity and health.
Utilizing a metal grip and small click in plastic tips, this system creates much less waste...about 95% less plastic than most disposable grips!
DK Swift Tips - 11 Mag - Box of 24 Tips (Grip Not Included)
*Must be used with DK Swift Tip Grip
These tips have great visibility and come to a nice point. The biggest benefit is being able to see more needle even when you don't have a lot of needle hanging out.
The shape of the mag tip allows for mor visibility at the end of the tip. The side wall is beveled back so there is no excess material on the edges. This allows for getting a more precise "cut in" near lines and tight spaces.
Fits 9 mags.
These tips are hydrophobic and have an antimicrobial additive in them. That said, you may need to check with your local health dept for protocol on single use plastic products used in the tattooing process. (such as ink caps)
*Blister packaged tips coming soon
Made in house at DK Rotary in Kansas City MO, USA
Better tools to make better tattoos.
Workhorse Irons
Workhorse Model 6 Shader - Black x Black
Regular price$325.00 USD
Workhorse Model 6 Shader
Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Shader inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes.
We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.
Specs:
Full Size Frame milled in house from a solid block of Ductile Iron
HD Flat Black Powder Coat Finish
Deluxe Workhorse Hardware with Black Oxide Finish
Swing Gate Steel Vise
Custom 8 Wrap 1.25" Coils
High End Specialty Steel Springs
Solid Copper Contact with Allen Key Insert
Reverse Rear Binder Setup with frame ground on coil deck
Long Stroke with a solid hit great for 5s to 15s
Medium Speed, running around 105-110 unloaded @ 6.5 Volts
6.5 Ounce Weight
Made in the USA
Workhorse Irons
Workhorse Model 6 Liner - Black x Black
Regular price$325.00 USD
Workhorse Model 6 Liner
Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes.
We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.
Highlights:
Full Size Frame milled in house from a solid block of Ductile Iron
HD Flat Black Powder Coat Finish
Deluxe Workhorse Hardware with Black Oxide Finish
Swing Gate Steel Vise
Custom 8 Wrap 1" Coils with 1/4" Steel Yoke
High End Specialty Steel Springs
Solid Copper Contact with Allen Key Insert
Reverse Rear Binder Setup with frame ground on coil deck
Specifications:
Long Stroke with a solid hit great for 5s to 14s
Medium Speed, running around 135-140 unloaded @ 6.5 Volts
6.5 Ounce Weight
Made in the USA
Workhorse Irons
Dan Kubin Sidewinder v7.5 - Verdigris x Gold
Regular price$1,075.00 USD
Dan Kubin Sidewinder v7.5
The main goal for this batch is for simple tuning, but with the option to dial it precisely for those who know how they want their machine to run. Considered by some to be the most revolutionary Sidewinder yet.
Highlights:
Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine. Impact screw is also adjustable for precise tuning.
Straight angle on drive spring shelf on the armature bar, allowing for a more effortless and graceful hit.
Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine.
More prominent timing marks on the side plate for the impact pin. (for advanced tuning/stroke adjustment, this helps with being more intuitive)
Cleaner sound/better acoustics.
Side locking screw is positioned to secure the impact screw most effectively
Specifications:
Forward, low and balanced weight of 6.2 oz
Recommended voltage range: 4 - 6.5
Great in the lower volt range for shading to color packing, fine line and stippled whip shading techniques.
It has 5 stroke positions ranging from 3.5-4mm. While tattooing, hit is controlled with adjustable return spring tension. If you want a softer hitting machine, you don’t have to compromise the stroke length. You can simply adjust the return spring tension on the fly throughout the tattoo.
Made in the USA!
DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinder go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Dan Kubin Sidewinder v7.5 - Frosted Rose Gold + Pink
Regular price$1,150.00 USDSale price$1,100.00 USD
Dan Kubin Sidewinder v7.5
The main goal for this batch is for simple tuning, but with the option to dial it precisely for those who know how they want their machine to run. Considered by some to be the most revolutionary Sidewinder yet.
Highlights:
Frosted Rose Plated Frame with 24k Gold Plated Hardware and Light Pink Side Plate.
Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine. Impact screw is also adjustable for precise tuning.
Straight angle on drive spring shelf on the armature bar, allowing for a more effortless and graceful hit.
Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine.
More prominent timing marks on the side plate for the impact pin. (for advanced tuning/stroke adjustment, this helps with being more intuitive)
Cleaner sound/better acoustics.
Side locking screw is positioned to secure the impact screw most effectively
Specifications:
Forward, low and balanced weight of 6.2 oz
Recommended voltage range: 4 - 6.5
Great in the lower volt range for shading to color packing, fine line and stippled whip shading techniques.
It has 5 stroke positions ranging from 3.5-4mm. While tattooing, hit is controlled with adjustable return spring tension. If you want a softer hitting machine, you don’t have to compromise the stroke length. You can simply adjust the return spring tension on the fly throughout the tattoo.
Made in the USA!
All DK Machines sold by Workhorse are engineered, designed, and tested by Dan, milled in his most trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Dan Kubin Sidewinder v7.5 - Black x Gold FEATHERWEIGHT
Regular price$1,100.00 USD
Dan Kubin Sidewinder v7.5
The main goal for this batch is for simple tuning, but with the option to dial it precisely for those who know how they want their machine to run. Considered by some to be the most revolutionary Sidewinder yet.
The v7.5 Sidewinder has the unique ability to allow users to adjust stroke length and hit independently. This means you can keep the stroke that works for you while playing with needle groupings, style, and skin types.
Highlights:
Black Aluminum frame with Ebony side plating
Deluxe 24k Gold Hardware
Impact screw and stroke length are now adjusted with the 1.5mm Allen key provided with the machine.
Straight angle on drive spring shelf on the armature bar, allowing for a more effortless and graceful hit.
More prominent timing marks on the side plate for the impact pin. (for advanced tuning/stroke adjustment, this helps with being more intuitive)
Crisp and clean acoustics, slightly quieter than other sidewinder models
Side locking screw is positioned to secure the impact screw most effectively
Specifications:
Forward, low and balanced weight of 4 oz
Recommended voltage range: 4 - 6.5
Great in the lower volt range for shading to color packing, fine line and stippled whip shading techniques.
It has 5 stroke positions ranging from 3.5-4mm. While tattooing, hit is controlled with adjustable return spring tension. If you want a softer hitting machine, you don’t have to compromise the stroke length.
The main goal for this batch is for simple tuning, but with the option to dial it precisely for those who know how they want their machine to run. Considered by some to be the most revolutionary Sidewinder yet.
Highlights:
24k Gold Plated Frame and Hardware with Light Pink Side Plate.
Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine. Impact screw is also adjustable for precise tuning.
Straight angle on drive spring shelf on the armature bar, allowing for a more effortless and graceful hit.
Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine.
More prominent timing marks on the side plate for the impact pin. (for advanced tuning/stroke adjustment, this helps with being more intuitive)
Cleaner sound/better acoustics.
Side locking screw is positioned to secure the impact screw most effectively
Specifications:
Forward, low and balanced weight of 6.2 oz
Recommended voltage range: 4 - 6.5
Great in the lower volt range for shading to color packing, fine line and stippled whip shading techniques.
It has 5 stroke positions ranging from 3.5-4mm. While tattooing, hit is controlled with adjustable return spring tension. If you want a softer hitting machine, you don’t have to compromise the stroke length. You can simply adjust the return spring tension on the fly throughout the tattoo.
Made in the USA!
All DK Machines sold by Workhorse are engineered, designed, and tested by Dan, milled in his most trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Sidewinders go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Sidewinders are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.
Limited Bowers Lightweight Repairable Clip Cord - Olive x Copper
Regular price$70.00 USD
Grouping
Price
Inventory
Quanity
6 Foot
$70.00 USD
Sold Out
8 Foot
$70.00 USD
Sold Out
Limited Edition version of the Joshua Bowers Repairable Clip Cord in Olive with Copper Lugs!
COMES WITH A TOOL KIT WITH ALL THE TOOLS YOU NEED TO REPAIR IT, including instructions and extra parts. Designed with function and maintenance in mind, this lightweight clip cord can be repaired quickly and easily! Never find yourself in a situation without a functioning clipboard and no options again.
Light weight non-stick cord material
Blackened Stainless Steel leads that are replaceable and easily modified to suit your machines or how you like your cord to lay
Long life spring that can be replaced, or repaired
Wires can be removed from lugs to repair shorts that happen from movement.
6 or 8 foot length
Very lightweight at a mere 2.45 ounces
Limited 1 Year Warranty covers product defects and not every day wear and tear.
Made in the USA
Some words from Bowers on why he made these clip cords:
A couple years ago I designed this clip cord and built one for myself. The design came from being frustrated with the options that were on the market. When I designed these clip cords I had a list of demands. -This cord HAD to be repairable, quickly and easily. -lightweight -no-stick, flexible cord -brass or copper leads Every part of the clip cord end can be replaced or repaired quickly and easily. Even comes with the parts and tools to do it! You will not be left struggling with a short in your cord, no backup and rummaging around looking for your best broken cord to finish or do the tattoo. The cord is a matte nonstick material that glides smoothly along surfaces, it is NOT a 5 lb clip cord you’re hooking up to 3 oz. machine, the brass leads will not groove your binding posts nearly as fast as the standard steel leads found on most clip cords. I’m excited about this new product and to able to finally share it with all of you.
