Limited Deluxe Chris Smith Carnivore Liner Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Aluminum Carnivore Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• 1.125" 6 Wrap Custom Soldered Coils
• 1/8" Yoke
• 2 Liner Armature Bar Options
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
• Weighs 5.5 oz

Liner typical specs:

• Pushes 5’s to 11’s Easy
• Running Slower and Harder
• 130-135Hz at 6.5 V unloaded

*Comes with the tools you need to build the machine except an Armature Bar Fixture and Alignment Tool. We highly recommend ordering some if you do not have them, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness. You can find them here in our Tool Category

Made in the USA.

New Limited Destroy Troy Franklin Liner!

After years of discussing, chipping away, and working on this project; Destroy Troy has resurrected Marv Lerning's Franklin tattoo machine and made it his own! Some serious frame adjustments altering the vise and moving the weight forward over the hand, multiple tweaks and updates, they are now dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Precision Machined Iron Frame
  
• Over-sized Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Highly Versatile Vise that can be used with a Left or Right Handed setup!
• 24k Gold Plated Destroy Troy Warp Drive Cray Bar
  
• Custom Hand Wound Coils, 9 Wrap Front and 7 Wrap Rear
  
• Custom Textured Olive Green Powder Coat
  
• Deluxe 24k Gold Plated Hardware plus pure Silver Contact
  
• Specialty Stainless Steel Springs that will not corrode
  

Specifications:

• Medium Speed with a Solid Hit
• Running  around 130-135 Hz Unloaded at 6.5V
• Great for use with 5s to 11s, turn up for 14s
• 7.5 oz Forward Weighted Machine
• Made in the USA

*These new needles on bar are the best premium needles we have ever made. Not only are they eco friendly, they also outperform all needles we have tested!

**SAMPLE PACKS NOW AVAILABLE - they include 50 needles on bar...10x 7 Round Traditional, 9 Round Traditional, 7 Mag, 9 Mag, and 5 Round Tight. Try an assortment of these high quality needles at a discounted price before making the change from your current needles on bar. 

Workhorse x Good Judy ECO Premium Needles on Bar

Tested and trusted, these pre-made Eco Conscious Tattoo Needles on Bar provide outstanding quality from WORKHORSE IRONS & GOOD JUDY INC. Their collaboration ensures a check of sustainability you can count on, certified by internationally-recognized third party organizations.

The packaging for these needles is completely unbleached, PFAS-free, compostable and recyclable, and is another step in our companies' commitment to environmental protection.

With more qc checks and heavier needle bars, this top-notch product is perfectly tailored for tattoo artists by tattoo artists, after 20 years of continuously improving their quality and configurations.

Specs:

• #12 Needles on all Traditional Groupings
• #10 Needles on all Tight Groupings / Bugpins
• Made with High Quality 316L Japanese Steel Needles plus Heavy Duty Thicker Needle Bars for greater stability 
• Easy open slide box
• All packaging is unbleached, PFAS free and compostable...even the needle trays and blister paper!
  

We have invested a year of effort and resources to ensure our needles and packaging meet the compostability standards of excellence. Although costly to create, we are proud of the superior results! We strive to offer more environmentally conscious tattoo products and diminish single use plastic while propelling eco-tattooing into ubiquity. This endeavor is yet another milestone toward our eco-friendly mission.

*please let us know if we don't have any groupings you need and we will add them to the line up

• High-grade Aluminum body precision milled
• Custom Black Anodized Parts with HD Sparkle Green Powder Coated Frame, plus Polished Brass Deluxe Binders and Cast WH Wingnut
• Custom Etched Cory Rogers Skulls and Daggers
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

The latest addition to the Sorry Mom family. Our VEGAN Process & Aftercare Butter.  

Developed for both process and aftercare, and recommended by professionals worldwide.

Key Benefits:

• Calming and regenerative

• Soothes the skin

• Keeps the skin soft and elastic

• Reduces redness

Ingredients:

Butyrospermum Parkii Butter, Mangifera Indica Seed Butter, Cocos Nucifera Oil, Prunus Amygdalus Dulcis Oil, Cetearyl Alcohol, Oryza Sativa Bran Oil, Hydrogenated Vegetable Oil, Jojoba Esters, Avena Sativa Kernel Oil, Polyglycerin-3, Helianthus Annuus Seed Oil, Tocopherol, Acacia Decurrens Flower Wax, Helianthus Annuus Seed Wax, Aloe Ferox Leaf Extract, Rosmarinus Officinalis Leaf Extract, Parfum.

VEGAN- The product is 100 % vegan and certified.

Oat Oil- Avena sativa (oat) Kernel Oil - rich in triglycerides, hydrates and moisturizes the skin, improves the skin barrier, supports physiology of skin and helps to prevents lipid peroxidation.

Rice Bran Oil- Packed with antioxidants and nutrients, Rice Bran Oil provides lightweight but powerful hydration while protecting the skin from free radical damage. Used trough centuries in Japan, this natural ingredient is rich on antioxidants and vitamin B and E. It softens and smoots the skin while it increases the skin barrier protection and effectively retains moisture.

Coconut Oil- A plan-based oil rich in protein, fat, fatty acids, and antioxidants. It helps soften and strengthen the skin while it also helps hydrating. It also helps bolster the skin’s protective barrier layer.

*Previous Version V3R Sidewinder! Limited run of Updated V3R Aluminum Sidewinders offered at special BLACK FRIDAY pricing! This unique version is no longer produced, but has been a fan favorite for it's lighter weight, lower voltage, and less aggressive hit. Looking for something a little more powerful, check out the new V3/23 for that extra hit.

Dan Kubin Updated V3R Sidewinder 2021/2022 Version (OG Description)

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Limited Black Featherweight Aluminum Frame
  
• 24k Gold Plated / Black Parts
• 24k Gold Plated Motor Cover
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

• Featherweight Aluminum model weighs in at a mere 3.5 Ounces!

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

*Spring Sale $75 off Limited Time Only*

Dan Kubin V3R Sidewinder 

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Limited Chartreuse Green Gloss Powder Coated Brass Frames
  
• Black Oxided Hardware
  
• Black HD PC Motor Cover
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

• High-grade Aluminum body precision milled
• Custom Black Anodized Parts with Distressed Black Frame, plus Blacked-out Deluxe Binders and Cast WH Wingnut
• Custom Etched Cory Rogers Skulls and Daggers
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

- CNC Cut Iron Frame
- HD Illusion Ice Gloss Powder Coat Finish
- Matching Swing Gate Vise with and Internal Spring for ease of use
- Black Deluxe Hardware
- 1" 8 Wrap Custom matching SOBA Coils
- Great for Medium to Large Groupings
- Medium Speed with a Hard Hit
- Pushing 7's to 14's All Day
- Running 130-140 Hz @ 6.5 V Unloaded
- Weighs 7.2 ounces
- MADE IN THE USA

New Limited Destroy Troy Franklin Liner!

After years of discussing, chipping away, and working on this project; Destroy Troy has resurrected Marv Lerning's Franklin tattoo machine and made it his own! Some serious frame adjustments altering the vise and moving the weight forward over the hand, multiple tweaks and updates, they are now dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Precision Machined Iron Frame
  
• Over-sized Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Highly Versatile Vise that can be used with a Left or Right Handed setup!
• Nickel Plated Destroy Troy Warp Drive Cray Bar
  
• Custom Hand Wound Coils, 9 Wrap Front and 7 Wrap Rear
  
• Custom Ice Blue Glossy Powder Coat
  
• Deluxe 24k Gold Plated Hardware plus Gold Plated pure Silver Contact
  
• Specialty Stainless Steel Springs that will not corrode
  

Specifications:

• Medium Speed with a Solid Hit
• Running  around 130-135 Hz Unloaded at 6.5V
• Great for use with 5s to 11s, turn up for 14s
• 7.5 oz Forward Weighted Machine
• Made in the USA

Limited Edition Seth Ciferri Doorbell Liner!

Technical Specs:

• Laser Cut and Bent Steel English Doorbell Reproduction Frame
  
• Welded Spring Shelf
• Bolt on Deluxe Steel Vise with Slide Mechanism to lock tight on any tube
• HD Powder Coat Red Gloss Finish
• Highly Durable, Oxidation Resistant Blackened Finish
• NEW Weighted Armature with Extra Thick Nipple
• NEW Narrow Stainless Rear Spring
• Deluxe Brass Binders
  
• Thick Base for better conductivity and less heat
• 1" 8 Wrap Custom Coils
• Medium Speed with a Solid Hit
• Running 125-130 Hz at 6V Unloaded
• Pushing 3's to 14's No Problem
• Weighing in at a compact and balanced 7 ounces with weight over hand and little cord pull
  
• As always, MADE IN THE USA

Here are a few words from Seth on this new machine:

This is a frame style I’ve been wanting to do for a long time, and finally got around to making it happen. Based almost entirely on an English doorbell I found at a flea market, with exact geometry, it hits HARD and can push any liner grouping on very low voltage and amps. PLUS I added in a new vise lock mechanism that holds any  tubes.

The response to these new doorbell liners has been overwhelming and exciting. It’s been a long time since I’ve designed and built a machine that gets me this hyped!

I think I’ve cracked the code on this one, my friends. Compact and sturdy, built to last a lifetime. 

Limited Mike Pike x Destroy Troy Teacup Liner - Raspberry x Gold x Nickel

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Weighted Jonesy Style Steel Vise designed to keep more mass over your hand to help balance the pull of your clipcord and reduce hand fatigue
• 24k Gold Plated Destroy Troy Warp Drive Cray Bar
  
• Custom 7 Wrap Black Electrical Coils
  
• HD Trans Raspeberry Powder Coated Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Nickel Plated Frame and Deluxe Hardware
  
• Deluxe 24k Gold Plated Pure Silver Contact Screw
  
• Plated Spring Shelf Yoke for Superior Connectivity
• Specialty Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running  around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

New SOBA V2 Mini Clipper Liner! Limited Edition Purple!

New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

- CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
- Anodized Satin Galactic Purple Finish
- Heavy Weight Brass Vise and Thumbscrew with a Cosmic Universe Black Powder Coated Finish
- Deluxe Brass Hardware plus Custom Blackened Steel Drop Down Rear Binder
- 1" 8 Wrap Custom Coils
- Great for Medium to Large Groupings
- Medium Speed with a Hard Hit
- Pushing 5's to 14's All Day
- Running 130-135 Hz @ 6.5 V Unloaded
- Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
- MADE IN THE USA

• High-grade Aluminum body precision milled
• Custom Black Anodized Parts with HD Satin Gold Powder Coated Frame, plus Blackened Deluxe Binders and Cast WH Wingnut
• Custom Etched Cory Rogers Skulls and Daggers
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz