Limited Mike Pike x Destroy Troy Teacup Liner - Raspberry x Gold x Nickel

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Weighted Jonesy Style Steel Vise designed to keep more mass over your hand to help balance the pull of your clip cord and reduce hand fatigue
• 24k Gold Plated Destroy Troy Warp Drive Cray Bar
  
• Custom Matching 8 Wrap Gold Fish Scale Coils
  
• HD Trans Raspberry Powder Coated Frame
• Nickel Plated Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Deluxe 24k Gold Plated Hardware
  
• Plated Spring Shelf Yoke for Superior Connectivity
• 24k Gold Plated Pure Silver Contact Screw
  
• Specialty Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
  

Made in the USA

Dan Kubin Sidewinder v7.4

The main goal for this batch is for simple tuning, but with the option to dial it precisely for those who know how they want their machine to run. Considered by some to be the most revolutionary Sidewinder yet.

Highlights:

• Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine. Impact screw is also adjustable for precise tuning.
• Straight angle on drive spring shelf on the armature bar, allowing for a more effortless and graceful hit.
• Impact screw and Impact pin are now adjusted with the 1.5mm Allen key provided with the machine.
• More prominent timing marks on the side plate for the impact pin.  (for advanced tuning/stroke adjustment, this helps with being more intuitive)
• Cleaner sound/better acoustics.
• Side locking screw is positioned to secure the impact screw most effectively

Specifications:

• Forward, low and balanced weight of 6.2 oz
• Recommended voltage range: 4 - 6.5
• Great in the lower volt range for shading to color packing, fine line and stippled whip shading techniques.
• It has 5 stroke positions ranging from 3.5-4mm. While tattooing, hit is controlled with adjustable return spring tension. If you want a softer hitting machine, you don’t have to compromise the stroke length.  You can simply adjust the return spring tension on the fly throughout the tattoo.  

Made in the USA!

DK Machines sold by Workhorse are engineered and designed by Dan. Parts are milled in his authorized and trusted machine shop, then assembled by DK certified trained technicians at the Workhorse facility in Michigan. All Mojobox go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. All current Mojobox are serviced by Workhorse, some older models are serviced by Dan or one of his certified technicians found on his website.

Adam Ciferri Pitbull Liner 

Limited Edition Sparkle Lilac x Gold

A few words from Adam on his history with this machine:
"I think most of you know that I've been making a version of this machine since about 1999, but, I don't know how many of you really know the story of how this machine came to be…

In mid 1999, the first Pitbull outliners were made by chopping down some bulldog shaders. They ran a bit slow and punchy for what I'd call an outliner, but, they definitely did the job. Over the years, there have been a few iterations of this machine, and almost all of them were based on, basically, cutting up a shader and, either making due with the geometry, or adjusting the geometry.

What we have here is the new version I designed for Workhorse Irons. This machine is based on the dedicated geometry that I've wanted for this machine since, just about, day one. It lends itself to a few different liner configurations without needing to apply any hocus-pocus. Small groupings? Sure. Medium groupings? Yes. Big, fat, ig'nunt-ass outlines? Fuck yeah-continually, since 1999! This machine has a great range, but is basically set up to make big fucking outlines, quickly."
Respectfully, Adam C

Highlights:

• CNC Cut Iron with the highest precision and care
  
• HD Lilac Powder Coat with Dark Purple Sparkle Finish
  
• 24k Gold Plated Hardware and Silver Contact
  
• 1.125" 8 Wrap Custom matching Coils

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
  
• Heavy hit that easily pushes 5's to 11's
  
• Runs 125-130z @ 6.5 Volts Unloaded
  
• Weighs 6.4 oz
  

Made in the USA

Limited Deluxe SOBA Mini Rusto Liner/Shader Kit!

Alignment tool included, as well as all necessary parts to build a great tattoo machine.

DOES NOT INCLUDE NECESSARY SKILLS OR INSTRUCTIONS!

Components:

• CNC Cut Iron Mini Rusto Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• Spring Loaded Swing Gate Vise
• 1" 8 Wrap Custom Soldered Coils
• Liner and Shader Armature Bars
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package includes all washers needed (steel, fiber, and shims)
  

Liner Specifications:

• Very Light and Quick with a Solid Hit
• Great for Smaller to Medium Sized Groupings
• Pushing 3's to 9's easy
• Running 140-145 Hz @ 6.5 V Unloaded
• Weighs 6.8 oz

Shader Specifications:

• Medium Quick Speed with a Solid Hit
• Pushing 5's to 13's easy
• Great for Packing in Solid Color, turn down a bit for Color Blends and Whip Shading
• Running 110-115 Hz @ 6.5 V Unloaded
• Weighs 6.8 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, as it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA

New Limited Destroy Troy Franklin Liner!

After years of discussing, chipping away, and working on this project; Destroy Troy has resurrected Marv Lerning's Franklin tattoo machine and made it his own! Some serious frame adjustments altering the vise and moving the weight forward over the hand, multiple tweaks and updates, they are now dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Precision Machined Iron Frame
  
• Over-sized Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Highly Versatile Vise that can be used with a Left or Right Handed setup! Simply remove thumbscrew / nut to reinsert and swap sides.
  
• 24k Gold Plated Destroy Troy Warp Drive Cray Bar
  
• Custom Hand Wound Coils, 9 Wrap Front and 7 Wrap Rear
  
• Custom Seafoam Powder Coat with Purple Metallic Sparkle
  
• Deluxe 24k Gold Plated Hardware plus pure Silver Contact
  
• Specialty Stainless Steel Springs that will not corrode
  

Specifications:

• Medium Speed with a Solid Hit
• Running around 130-135 Hz Unloaded at 6.5V
• Great for use with 5s to 11s, turn up for 14s
• 7.5 oz Forward Weighted Machine
• Made in the USA

Noe Quintillan Lightweight RCA Cord

Handmade in Spain with the highest precision and care by Noe Quintillan.

The most compact, lightweight, and versatile RCA Cord and clip cord to RCA adapter available. Designed and built to be a compact adapter for use specifically on Kubin machines, but also provide a universal fit on any RCA machine and clip cord setup.

Available with or without the Clip Cord to RCA Adapter.

Special Limited Edition Dan Kubin X Adam Ciferri Ghost Dog Revival Hybrid

Biomech Frame carved by Aaron Cain!!!

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Highlights:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• Biomech Carved and Finished by Aaron Cain!
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• CNC Cut Iron with the highest precision and care for superior conductivity
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom Heat Blackened Finish
  
• Deluxe DK Blackened Hardware and Stainless Spring

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Machine Setup:

• Machine comes setup for use as a slow or medium speed Liner or a quick shader. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible

Made in the USA

Dan Kubin Weighted Impact Screw Kit

"New updated weighted impact screw! I found that it helps with the stability of the hit and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band."

Thanks - Dan

Weighted Impact Kit Specifications:

• Upgrade for Dan Kubin V3R with updated armature bar (Late 2019 to 2022)
  
• Custom heat treated tool steel RHC 60 plus o-ring
• Easy swap out to increase the hit while improving the overall feel and sound
• Kit also includes both the 1.5mm and 2mm L wrench

Upgrade Step by Step: (see pictures for guidance)

1. Use the 1.5mm wrench to loosen the set screw on the side of the armature bar. Half a turn should loosen it enough to easily remove the impact screw.
2. Hold down the armature bar and use the 2mm wrench to remove the old impact screw.
3. Once removed, use the 1.5mm wrench to insert and tighten the weighted impact screw down until the o-ring starts to bulge out as it makes contact with the top of the armature.
4. Tuning - this is the most important step and will affect the timing and stroke of your machine.
1. While holding the armature bar down, roll the cam back until it makes contact with the vertical spring and gently stops. In this position the timing mark on the cam should align with the center of the timing mark on the frame.
2. If the timing mark on the cam is on the low side of the timing mark on the frame, tighten the weighted impact a little until it raises up to the center of the timing mark on the frame.
3. If the timing mark on the cam is on the high side, the impact is too far in and needs to be backed out (loosened) until the timing mark on the cam is in the center of the timing mark on the frame.
5. Use the 1.5mm wrench to tighten the set screw on the side of the armature bar.
6. Your machine is now upgraded and ready to use. One note would be that the new impact works well with the rubber band pulled slightly higher on the needle bar, so it is perpendicular when the armature is in the down position.

*Spring Sale $50 off Limited Time Only*

Dan Kubin V3R Sidewinder 

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Frosted Rose Plated Brass Frames
  
• 24k Gold Plated Parts
• 24k Gold Plated Motor Cover
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

Adam Ciferri Bulldog Shader Kit

Includes everything* needed to build a nice tattoo machine...

Components:

• CNC Cut Iron Bulldog Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• 1.25" 8 Wrap Custom Soldered Coils with 47 Cap
  
• Long Nipple Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included

Adam's Machine Setup:

• Tuned for all-day, every-day street shop and/or custom tattooing
  
• Solid hit that easily pushes 5-15 Mag Groupings
  
• Runs 95-105Hz @ 6.5 Volts Unloaded
  
  

*Includes all the tools you need to build the machine except an Armature Bar Fixture. We highly recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness. You can find one here in our Tool Category 

Made in the USA.

Dan Kubin V3R Sidewinder 

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Limited White Gloss Powder Coated Brass Frames
  
• 24k Gold Plated Parts
• 24k Gold Plated Motor Cover
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

Mike Pike x Ernie Carafa Cast Iron Liner

Very special collaborative frame designed and cast in iron by Mike Pike and Ernie Carafa. Originally crafted years ago, and recently pulled from rusty buckets to be cleaned up, cnc milled with collet vises welded in, and built up by Mike Pike.

Highlights:

• Cast Iron Frame
  
• Black Zinc Finish
• Deluxe Workhorse Blackened Hardware
• Long Nipple Armature Bar
• Blackened Steel binding posts
• Deluxe Workhorse Blackened Hardware
• 1.125" 8 Wrap Workhorse Coils

Specifications:

• Slow Speed with a Long Stroke and Solid Hit
• Running 125-130 Hz unloaded at 6.5 volts
• Great for use with 5s to 11s
  
• Forward facing wingnut that won't ride your hand or get in the way
• Solid machine weighing in at about 8 oz
  

Made in the USA

This highly durable semi-transparent black bag is ideal for all bottles. It looks and feels like a regular bag but it is completely home compostable. Protect your surfaces from bacteria, viruses and liquids. 

100% compostable means that bioplastic products are fully renewable. It can be converted back to monomer and polymer, or, it can be biodegraded into water, carbon dioxide and organic materials.

Features:

Benefits:

Good Judy Compostable Tattoo Machine Bag

Features:

Benefits:

Description:

Features:

Benefits: