Limited Mike Pike x Destroy Troy Teacup Liner - Raspberry x Gold x Nickel

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Weighted Jonesy Style Steel Vise designed to keep more mass over your hand to help balance the pull of your clipcord and reduce hand fatigue
• 24k Gold Plated Destroy Troy Warp Drive Cray Bar
  
• Custom Matching 8 Wrap Gold Fish Scale Coils
  
• HD Trans Raspeberry Powder Coated Frame
• Nickel Plated Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Deluxe 24k Gold Plated Hardware
  
• Plated Spring Shelf Yoke for Superior Connectivity
• 24k Gold Plated Pure Silver Contact Screw
  
• Specialty Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running  around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

*Spring Sale $50 off Limited Time Only*

Dan Kubin V3R Sidewinder 

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Limited Aqua Blue Powder Coated Aluminum Frames
  
• Blackened Parts
• Black Anodize Aluminum Motor Cover
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

• 3.5 Ounce Weight

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

Dan Kubin V3R Sidewinder 

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Limited HD Textured Red Powder Coated Brass Frame
  
• 24k Gold Plated Parts
• 24k Gold Plated Motor Cover (finish may vary)
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

*Spring Sale $75 off Limited Time Only*

Dan Kubin V3R Sidewinder 

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Limited HD Purple Powder Coated Brass Frame
  
• 24k Gold Plated Parts
• 24k Gold Plated Motor Cover (finish may vary)
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

New SOBA Bolo Shader!!

"I’m very stoked to share my new @workhorseirons production model with you all! The one piece BOLO machine is now available!!
🔥
I combined the geometry of my Bolo braze-up. Streamlined it. The machine shop at Workhorse NAILED it!
💚
These will come standard as you see here. Swing gate tube vise for all the tubes. The textured eggshell finish is the color of Irish tea and is complimented by polished up phenolics, olive green gaffers and brass hardware."

- CNC Cut Ductile Iron Frame
- Drilled Out and Lightened Upright
- Swing Gate Vise with and Internal Spring for ease of use
- Custom Eggshell Tan Powder Coat Finish
- Custom Deluxe Antiqued Brass Hardware
- Deluxe 1" 8 Wrap Olive Gaffers T-Top Coils with Polished Phenolics
- Medium Spreed with a Solid Hit
- Great for Quick Color Packing, turn down and it back off nice for Blends / B&G
- Pushing 5's to 11's easy, turn up a little for 13's
- Running 110-115 Hz @ 6.5 V Unloaded
- Weighs 6.8 oz
- MADE IN THE USA

Limited Mike Pike x Destroy Troy Teacup Liner - Sour Apple x Gold

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Weighted Jonesy Style Steel Vise designed to keep more mass over your hand to help balance the pull of your clipcord and reduce hand fatigue
• 24k Gold Plated Destroy Troy Warp Drive Cray Bar
  
• Custom 8 Wrap Gold Green Fish Scale Coils
  
• HD Illusion Sour Apple Powder Coated Frame
• 24k Gold Plated Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Deluxe 24k Gold Plated Hardware
  
• Plated Spring Shelf Yoke for Superior Connectivity
• 24k Gold Plated Pure Silver Contact Screw
  
• Specialty Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running  around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

Limited Edition Adam Ciferri Pitbull Liner - Rainbow Sparkle Black x Gold

Specifications:
- Tuned for all-day, every-day street shop and/or custom tattooing
- Heavy hit that easily pushes 5's to 11's
- Runs 125-130z @ 6.5 Volts Unloaded
- CNC Cut Iron with the highest precision and care
- HD Rainbow Sparkle Black Powder Coat Finish
- 24k Gold Plated Hardware and Silver Contact
- 1.125" 8 Wrap Custom matching Coils
- Weighing in at 6.4 ounces
- MADE IN THE USA

A few words from Adam on his history with this machine:
"I think most of you know that I've been making a version of this machine since about 1999, but, I don't know how many of you really know the story of how this machine came to be…

In mid 1999, the first Pitbull outliners were made by chopping down some bulldog shaders. They ran a bit slow and punchy for what I'd call an outliner, but, they definitely did the job. Over the years, there have been a few iterations of this machine, and almost all of them were based on, basically, cutting up a shader and, either making due with the geometry, or adjusting the geometry.

What we have here is the new version I designed for Workhorse Irons. This machine is based on the dedicated geometry that I've wanted for this machine since, just about, day one. It lends itself to a few different liner configurations without needing to apply any hocus-pocus. Small groupings? Sure. Medium groupings? Yes. Big, fat, ig'nunt-ass outlines? Fuck yeah-continually, since 1999! This machine has a great range, but is basically set up to make big fucking outlines, quickly."
Respectfully, Adam C

Limited Edition Adam Ciferri Pitbull Liner - Sparkle Lilac x Gold

Specifications:
- Tuned for all-day, every-day street shop and/or custom tattooing
- Heavy hit that easily pushes 5's to 11's
- Runs 125-130z @ 6.5 Volts Unloaded
- CNC Cut Iron with the highest precision and care
- HD Lilac Powder Coat with Dark Purple Sparkle Finish
- 24k Gold Plated Hardware and Silver Contact
- 1.125" 8 Wrap Custom matching Coils
- Weighing in at 6.4 ounces
- MADE IN THE USA

A few words from Adam on his history with this machine:
"I think most of you know that I've been making a version of this machine since about 1999, but, I don't know how many of you really know the story of how this machine came to be…

In mid 1999, the first Pitbull outliners were made by chopping down some bulldog shaders. They ran a bit slow and punchy for what I'd call an outliner, but, they definitely did the job. Over the years, there have been a few iterations of this machine, and almost all of them were based on, basically, cutting up a shader and, either making due with the geometry, or adjusting the geometry.

What we have here is the new version I designed for Workhorse Irons. This machine is based on the dedicated geometry that I've wanted for this machine since, just about, day one. It lends itself to a few different liner configurations without needing to apply any hocus-pocus. Small groupings? Sure. Medium groupings? Yes. Big, fat, ig'nunt-ass outlines? Fuck yeah-continually, since 1999! This machine has a great range, but is basically set up to make big fucking outlines, quickly."
Respectfully, Adam C

Limited Deluxe SOBA Mini Rusto Liner/Shader Kit!

This machine kit comes with parts to build as either a liner or a shader. Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Iron Mini Rusto Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• Spring Loaded Swing Gate Vise
• 1" 8 Wrap Custom Soldered Coils
• Liner and Shader Armature Bars
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included
• Weighs 6.8 oz

Liner typical specs:

• Very Light and Quick with a Solid Hit
• Great for Smaller to Medium Sized Groupings
• Pushing 3's to 9's easy
• Running 140-145 Hz @ 6.5 V Unloaded

Shader typical specs:

• Medium Quick Speed with a Solid Hit
• Pushing 5's to 13's easy
• Great for Packing in Solid Color, turn down a bit for Color Blends and Whip Shading
• Running 110-115 Hz @ 6.5 V Unloaded

Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's...also able to push very large groupings if you bump the volts up a bit
• Runs 110-115 Hz @ 6.5 Volts Unloaded
• Good for Quick Color Packing or B&G Work / Color Blends
• CNC Cut Iron with the highest precision and care
• 1" Custom Keg Coil
• HD Black Powder Coat Finish
• Deluxe Blackened Hardware
• Weighs 6 oz
• MADE IN THE USA

A few words from Adam about this machine:
"The Ghost Dog Shader is tuned for all-day, every-day street shop and/or custom tattooing. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care
• 1" Keg Coil
• HD Black Powder Coat Finish
• Deluxe Blackened Hardware
• Weighs 6 oz
• MADE IN THE USA

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

*V1 Sale $100 off Limited Time Only*

Dan Kubin X Adam Ciferri Ghost Dog Revival Hybrid - Version 1

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Machine Specs:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Machine comes setup for use as a slow or medium speed Liner or a quick shader. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care for superior conductivity
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom Rubbed Bronze Plated Finish on the Frame
  
• Deluxe DK 24k Gold Plated Hardware and Stainless Spring
• Weighs 6 oz
• MADE IN THE USA

Machine Setup:

• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.