$50 Gift Certificate. The Gift Card Code will be emailed to you.

THANK YOU FOR BEING ONE OF OUR TOP 50 CUSTOMERS THIS YEAR! WE TRULY APPRECIATE YOUR BUSINESS AND WANTED TO SAY THANKS WITH THIS GIFT CARD TO USE ON ANY FUTURE PURCHASES. HAVE A HAPPY HOLIDAY!

                -WORKHORSE IRONS

 

Standard Workhorse Cartridges! (Non-Membrane)

BEST FOR USE WITH NON-PEN STYLE MACHINES

We have been working towards this for quite some time now and we are very happy with the quality and performance of these cartridges. 

Produced with the same needle quality and configuration spacing as our standard needles on bar. These cartridges are very consistent with numerous quality checks in production, ensuring a much higher quality cartridge guaranteed to work well for every tattoo.

• High Quality #12 Needles for all Traditional groupings
• #10 Bugpins for all groupings listed as Tight 
• Easy Twist and Lock Mechanism to securely hold your Cartridges in place
• Cartridge Needles Packed 20 per box
• Non-Membrane RUBBER BAND Cartridge
• 20 Cartridges per Box

As with all of our products that we offer, these cartridges are designed by tattoo artists for tattoo artists.....none of the standard off the shelf grouping configurations.

Better tools to make better tattoo

*please let us know if we don't have any groupings you need and we will add them to the line up

Saniderm Tattoo Adhesive Film is a flexible, breathable, protective layer that allows for your tattoo to heal properly, while simultaneously eliminating the need to constantly avoid water, apply lotions, etc. With Saniderm, your client can go about her/his usual routine and still expect to have a sharp, vibrant, and fully healed tattoo. 

Tips for Saniderm Tattoo Aftercare

- For maximum comfort, ensure skin is in a neutral position when applying Saniderm. When applying to elbows and knees, the joint should be in a neutral position — neither straight nor completely bent.
- Shave, shave, shave. Peeling Saniderm off of hair is unpleasant. Shave the entire area, plus an additional inch all the way around the site of the tattoo.
- Practice before you apply. If it's your first time using Saniderm, it may be a little tricky to work with. It doesn't hurt to practice with a small section first, just make sure you shave the area.
- When cutting the bandage for application, remember that rounded corners provide the best adhesion.
- It's okay, when using multiple Saniderm bandages, to overlap them by 1/2 inch (1 cm).
- If using a glycerin soap, such as green soap, be sure to rinse thoroughly, as any residue will react with the adhesives and can cause binding and irritation. Avoid loofahs or scratchy wash cloths.

Seth Ciferri's Middleweight Weiner Dog Shader 2.2! Same geometry and size as the lightweight version, but with a beefier base and spring shelf providing more power but still keeping the weight under 6 ounces!

**NOW WITH A SPRING LOADED SWING-GATE VISE

- CNC Machined Iron Frame
- Deluxe Black Zinc Finish
- Swing-Gate Vise Guaranteed to Lock Tight on Any Tube
- Deluxe Black Seth Hardware and Workhorse Coin Thumbscrew
- 1" 8 Wrap Taped Coils Plus Capacitor Strap
- Medium Speed with a Hard Hit
- Great For Color Packing and Whip Shading
- Running 100-105 Hz @ 6 V Unloaded
- Pushing 5's-15's All Day
- Weighing in at a mere 5.95 oz
- MADE IN THE USA

Seth Ciferri's Middleweight Weiner Dog Liner 2.2! Same geometry and size as the lightweight version, but with a beefier base and spring shelf providing more power but still keeping the weight under 6 ounces!

**NOW WITH A SPRING LOADED SWING-GATE VISE

- CNC Machined Iron Frame
- Deluxe Black Zinc Finish
- Swing-Gate Vise Guaranteed to Lock Tight on Any Tube
- Deluxe Black Seth Hardware and Workhorse Coin Thumbscrew
- 1" 8 Wrap Taped Coils Plus Capacitor Strap
- Medium Speed with a Hard Hit To push Larger Groupings
- Running 130-135 Hz @ 6 V Unloaded
- Pushing Loose 5's to 14's Easy
- Weighing in at a mere 5.95 oz
- MADE IN THE USA

Seth Ciferri Light Weight Weiner Dog Shader 2.1

Extremely Lightened Weiner Dog 2.1 CNC Iron Frame. Shaders weigh a mere 5.5 ounces

- New Improved Geometry providing a very powerful hit from a very small machine
- Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
- Standard Workhorse Red Oxide Finish
- Black Workhorse Hardware and Coin Thumbscrew
- 1" 8 Wrap Workhorse Coils Plus Capacitor Strap
- Medium Speed with a Hard Hit
- Great For Color Packing and Whip Shading
- Running 100-105 Hz @ 6 V Unloaded
- Pushing 7's-13's All Day
- MADE IN THE USA

Seth Ciferri Light Weight Weiner Dog Liner 2.1

Extremely Lightened Weiner Dog 2.1 CNC Iron Frame. Liners weigh a mere 5.5 ounces

- New Improved Geometry providing a very powerful hit from a very small machine
- Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
- Standard Workhorse Red Oxide Finish
- Black Workhorse Hardware and Coin Thumbscrew
- 1" 8 Wrap Workhorse Coils Plus Capacitor Strap
- Medium Speed with a Hard Hit To push Larger Groupings
- Running 130-135 Hz @ 6 V Unloaded
- Pushing Loose 5's to Loose 11's Easy
- MADE IN THE USA

**Lock-down machines from Canada now available at a discounted price!

We closed our Canadian branch early on during the extended lock-downs in Canada and we were unable to retrieve them or cross the border until recently. These are all brand new machines, they have just been sitting boxed up in Canada since the early days of Covid in 2020. They are dated 2018/2019 and run as they should with no wear or corrosion. Sales are final, but warranties still do apply.

 

Seth Ciferri Mini Fastback Shader

- CNC Cut Iron Mini Fastback Shader Frame
- Black Zinc Finish
- Black Workhorse Hardware and Coin Thumbscrew
- Spring Loaded Swing Gate Vise Guaranteed to Lock Down on Any Tube
- 1" 8 Wrap Workhorse Coils
- Medium Speed with a Hard Hit
- Running 105-110 Hz @ 6 V Unloaded
- Pushing up to 13's Easy
- Weighs 7.2 oz
- MADE IN THE USA

Seth Ciferri Mini Fastback Liner

- CNC Cut Iron Mini Fastback Liner Frame
- Black Zinc Finish
- Black Workhorse Hardware and Coin Thumbscrew
- Spring Loaded Swing Gate Vise Guaranteed to Lock Down on Any Tube
- 1" 8 Wrap Workhorse Coils
- Medium Slow Speed with a Medium Hard Hit
- Running 125-130 Hz @ 6 V Unloaded
- Pushing 5's to 11's No Problem
- Weighs 7.2 oz
- MADE IN THE USA

Seth Ciferri Cholomatic™ Liner

- CNC Cut Cholomatic™ Liner Frame
- Drop Down E-Z Pinch Vise Allowing For More Space
- Black Zinc Finish
- Antiqued Brass Workhorse Hardware
- 1.25" 8 Wrap Workhorse Coils
- Quick with a Soft Hit
- Perfect for Stippling and Extra Fine Lines
- Running 150- 155 Hz @ 6 V Unloaded
- Pushing 1's to 3's Easy
- Weighs 7.2 Ounces
- MADE IN THE USA

Seth Ciferri Micro Jones Shader

- CNC Cut Iron Micro Jones Shader Frame
- Black Zinc Finish
- Seth Deluxe Black Hardware
- Seth Side Facing Guillotine Vise
- 1" 8 Wrap Workhorse Coils
- Medium Slow Speed with a Hard Hit
- Running 100-105 Hz @ 6 V Unloaded
- Pushing 5's to 15's All Day
- Weighs 7.2 Ounces
- MADE IN THE USA

A Few Words From Seth about this machine:
"these are the culmination of everything I've learned in more than 20 years of building machines, from a comfortable clip cord position, purposeful geometry, ease of maintenance, useful tube vise, to good balance, and everything else in between. they have a wide operating range, and are capable of pushing the big stuff with ease, or backing off for finesse when executing the most detailed and intricate work. I couldn't be happier with how they've turned out."

Seth Ciferri Micro Jones Liner

- CNC Cut Iron Micro Jones Liner Frame
- Black Zinc Finish
- Seth Deluxe Blackened Hardware
- Seth Side Facing Guillotine Vise
- 1" 8 Wrap Workhorse Coils
- Medium Quick Speed with a Hard Hit
- Running 135-140 Hz @ 6 V Unloaded
- Pushing 3's to 14's Easy
- Weighing in at 7.2 ounces
- MADE IN THE USA

A Few Words From Seth about this machine:
"these are the culmination of everything i've learned in more than 20 years of building machines, from a comfortable clip cord position, purposeful geometry, ease of maintenance, useful tube vise, to good balance, and everything else in between. they have a wide operating range, and are capable of pushing the big stuff with ease, or backing off for finesse when executing the most detailed and intricate work. I couldn't be happier with how they've turned out."

Workhorse Tube Cleaning Brushes

Clean tubes prior to sterilization with ease! New high quality heavy duty stainless steel brushes, available in three sizes to meet all your scrubbing needs!

- Small: 0.10" Diameter, 4" Overall Length
- Medium: 0.25" Diameter, 10" Overall Length
- Large: 0.40" Diameter, 6" Overall Length

ReproFX Spirit™ Thermal Tattoo Transfer Papers are made for the professional artist from the highest quality materials to create the highest visibility purple dyes and best ripstop stencil sheets in the world.

• Compatible with all thermal printers
• Consistant, high quality images
• Skin safe & shelf-stable

Manufactured in the United States since 1948.