Mike Pike PMA Direct Drive Rotary!

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guaranteed to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

Highlights:

• High-grade Aluminum body precision milled with a durable Black Anodize Finish
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
  
• Clipcord connection
• Vertical swing gate tube vice that will bite and hold all disposable and stainless tubes 
  
• Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy
  

Specifications:

• Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
  
• Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
  
• Lightweight - a mere 4.5 oz
  

Made in the USA

Aaron Cain Copper Tools now available!

Based off Aaron's hand carved Copper Tools, we worked with Aaron on designing a version we could cut and CNC mill to add some extra shape and depth to them, while also keeping them affordable. These tools were a lot of work, but a fun project and very useful a daily carry addition. They work great as a bottle opener, door opener, button pusher, defense mechanism, or really any other creative purpose. Copper is naturally antimicrobial, making it a great material for insulating oneself from high touch surfaces that may contain harmful microbes and disease.

Specs:

• Cut from 1/4" Copper
• Milled, Chamfered, Sanded, Tumbled, Stamped, and Lightly Polished
• 2.5" x 5" Overall Dimension
• Oblong 1.25" x 1.125" Finger Hole
• Limited Run

Made in the USA

**The use of a Copper Alloy surface is a supplement to and not a substitute for standard infection control practices; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces. The Copper Alloy surface material has been shown to reduce microbial contamination, but it does not necessarily prevent cross-contamination.

Limited Edition Run of Supreme Style OG Flastside Walkers in Brass

We are very stoked to finally release this special edition run of machines that have been in the works for months. From digging up the old pattern, casting frames, various machining tweaks, hand grinding, stamping, polishing, custom coils, quarters straight from the US mint, silver contacts, assembly and fine tuning.... these machines are top notch with no expense spared in their creation.

Highlights:

• Cast Brass OG Walker Frame
• Hand Ground, Prepped and Lightly Polished Finish
• Deluxe Brass Hardware, Plus Silver Contact
• Hand Brazed Collet Vise, great for use with Disposable and Steel Tubes
• 2020 Milled Quarter Spring Saddle, Plus Dime Washers
• 1.25" 8 Wrap Square Bottom Custom Coils with Specialty Cores

Specifications:

• Medium Quick Speed with a Solid Hit
• Running 138-145 Hz at 6V Unloaded
• Pushing 3's to 9's No Problem
• Weighing in at about 7 ounces
  

Made in the USA

Blackwork Nitrile Gloves

Made from a non-latex nitrile formula, these new Blackwork medical grade exam gloves offer all of the benefits of natural rubber latex with none of the allergen problems associated with latex. Blackwork gloves were specially formulated / designed to reduce hand fatigue during long tattoo sessions. Using their patented formula, they've created a glove with almost zero resistance while maintaining comfort, elasticity, and strength. Textured finish for wet and dry gripping ability.

• 100ct. per box
• Patented Ultra Elastic Black Nitrile Formula
• Near Zero Resistance, reduced hand fatigue over long hours
• Textured surface for greater grip and tactile sensitivity
• Smaller box size reduces shipping cost
• Extreme elasticity

Their new patented Black Nitrile formula is the most scientifically advanced glove in the Tattoo Industry. Unrivaled protection, Zero resistance, Incredible comfort, and a textured surface with unbelievable tactile sensitivity. 

Custom Printed Workhorse Face Mask (2 Pack)

• Made of Quilted Thick 3-Ply Fabric
• Elastic Straps - One Size Fits Most
• Two Masks included in each order
• Three Custom Sublimated Design Options
• Washable and Reusable
• Handmade In England not China :)

CDC Information on How to wear a Face Covering - Click Here

Please note: These custom face masks are NOT medical grade masks (which are recommended by the World Health Organization (WHO) as an infection preventative measure, i.e. grade FFP2/N95). So please DO NOT purchase custom face masks with the false understanding they will prevent infection from Coronavirus. They are more about protecting others to reduce spread. Due to the personal hygiene nature of the product, your custom face masks are non-returnable.

***COVID-19 UPDATE: We are shipping daily and have now expanded our requirements to include Medical Professionals. We still do not sell to at home tattooers but gladly sell to any medical professionals that need supplies. You are top priority, thank you for all you do!


Specs:

• Ingredients: Ethyl Alcohol 70%, Aloe Barbadensis Leaf, Carbomer, Dimethicone, Triisopropanolamine, Water
• 2 oz Bottle with Twist Top
• Made from plant based Ethanol with a mild lavender scent
• Made in the USA
   

SANITIZER CONTAINS ALCOHOL WHICH MAY BE DRYING TO THE HANDS. PLEASE KEEP OUT OF REACH OF CHILDREN. DO NOT INGEST HAND SANITIZER IS FLAMMABLE AND RAGS SOAKED IN HAND SANITIZER WILL BE FLAMMABLE. RAGS OR GARMENTS SOAKED IN HAND SANITIZER SHOULD NOT BE DRIED IN A DRYER EVEN AFTER BEING WASHED. OTHER WARNINGS APPLY AND WILL BE POSTED ON PRODUCT LABELS. 

Workhorse Brass Tool now available!

These tools were a fair amount of work, but a fun project and very useful daily carry addition. They work great as a bottle opener, door opener, button pusher, defense mechanism, or really any other creative purpose. Brass is naturally antimicrobial, making it a great material for insulating oneself from high touch surfaces that may contain harmful microbes and disease.

Highlights:

• Cut from 1/4" 260 Brass
• Hand Chamfered, Sanded, Tumbled, Stamped, and Lightly Polished
• 1.5" x 4.3" Overall Dimension
• 0.915" Finger Hole
  

Made in the USA

**The use of a Copper Alloy surface is a supplement to and not a substitute for standard infection control practices; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces. The Copper Alloy surface material has been shown to reduce microbial contamination, but it does not necessarily prevent cross-contamination.

Juan Puente Springs

Each Spring Set Includes: Fully punched front and rear springs.

Liner Spring Set- Juan Puente Liner (Medium Front, Short Rear)
Shader Spring Set- Juan Puente Shader (Long Front, Short Rear)

KN95 Face Mask (Sealed Packs of 20)

• Active carbon high-filtration mask with 5 layers
• Up To 50 Times Protection Against Non-Toxic Dusts, Fibres & Aqueous Mists
• High filtration efficiency and low breathing resistance
• Adjustable nose clip
• Easy To Store Due To Fold Flat design

*Not intended for medical use. So please, DO NOT purchase face masks with the false understanding they are 100% effective preventing infection from the Coronavirus. They are more about protecting others to reduce spread.

**Due to the personal hygiene nature of the product, face masks are non-returnable. 

Chris Smith Supreme Liner! 

Built with an aluminum upright and ass end with a steel base/vise, this half and half machine is lightweight, well-balanced, and built for all day everyday tattoos.

Highlights:

• CNC Cut Aluminum Frame
• Steel Base and Vise Inlaid into the Aluminum Frame
• Deluxe Blackened Steel Hardware, Spring Saddle, and Clip Cord Yoke Screw
  
• 6 Wrap 1.25” Tape Coils with Oversized Cap
  

Specifications:

• Pushes 5’s to 14’s Easy
• Long Stroke, Medium Speed with a Heavy Hit
  
• 130-135 Hz at 6.5 V unloaded
• Weighs a mere 5.6 oz
  

Made in the USA

Regenerative tattoo film for fresh tattoos

Recommended by tattoo professionals worldwide

Highlights:

• Waterproof
  
• Breathable
  
• Easy to measure and apply
  
• Perfect for an active lifestyle
  
  

Tips for Tattoo Film Use:

• For maximum comfort, ensure skin is in a neutral position when applying Tattoo Film. When applying to elbows and knees, the joint should be in a neutral position — neither straight nor completely bent.
  
• Shave, shave, shave. Peeling Tattoo Film off of hair is unpleasant. Shave the entire area, plus an additional inch all the way around the site of the tattoo.
  
• Practice before you apply. If it's your first time using Tattoo Film, it may be a little tricky to work with. It doesn't hurt to practice with a small section first, just make sure you shave the area.
  
• When cutting the bandage for application, remember that rounded corners provide the best adhesion.
  
• It's okay, when using multiple Tattoo Film bandages, to overlap them by 1/2 inch (1 cm).
  
• If using a glycerin soap, such as green soap, be sure to rinse thoroughly, as any residue will react with the adhesives and can cause binding and irritation. Avoid loofahs or scratchy wash cloths.

This packaging is made out of recycled materials. Please recycle it as well and contribute to a cleaner planet.

SOBA Mini Rusto Shader with Swing Gate Vise

After his 2020 Sobbatical, BJ is back building a limited amount of custom coil machines, working on new production, and now making rotary machines! After many years and many updates, we are excited to release SOBA's newest version of the Mini Rusto, now built again by SOBA!

Highlights:

• CNC Cut Ductile Iron Frame 
  
• Drilled Out and Lightened Upright 
  
• Swing Gate Vise with and Internal Spring for ease of use
  
• Black Zinc Finish
  
• Custom Deluxe Black Hardware
  
• Deluxe 1" 8 Wrap T-Top Coils

Specifications:

• Medium Quick Speed with a Solid Hit
  
• Pushing 5's to 13's easy
  
• Great for Packing in Solid Color, turn down a bit for Color Blends and Whip Shading
  
• Running 110-115 Hz @ 6.5 V Unloaded
  
• Weighs 6.8 oz
  

Made in the USA

SOBA Mini Rusto Liner with Swing Gate Vise

After his 2020 Sobbatical, BJ is back building a limited amount of custom coil machines, working on new production, and now making rotary machines! After many years and many updates, we are excited to release SOBA's newest version of the Mini Rusto, now built again by SOBA!

Highlights:

• CNC Cut Ductile Iron Frame 
  
• Drilled Out and Lightened Upright 
  
• Swing Gate Vise with and Internal Spring for ease of use
  
• Black Zinc Finish
  
• Custom Deluxe Blackened Hardware
  
• Deluxe 1" 8 Wrap T-Top Coils

Specifications:

• Very Light and Quick with a Solid Hit 
  
• Great for Smaller to Medium Sized Groupings
  
• Pushing 3's to 9's easy
  
• Running 140-145 Hz @ 6.5 V Unloaded
  
• Weighs 6.8 oz
  

Made in the USA

LIMITED RUN OF CUSTOM Deluxe Workhorse Metered Power Supply

• Clean and Consistent Power
• Volts, Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 110 V US electrical plug or 220V EU electrical plug
• Comes with 3 Powerful Quarter Sized Magnets, Feet, and Desktop Stand
• Weighing in at 1 Pound
• Various Powder-coat finishes
• 4.25" x 3.6" x 1.35" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Desktop Stand - use included 3m adhesive to attach included magnets to back of power supply, then magnet the supply to the stand
• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

No corners were cut and no expenses spared; these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.