Never spill a rinse cup again with these new Magnetic Rinse Cup Holders!

Made by Team Victory Tattoo, these steel rinse cup holders have a heavy duty powder coat finish that will wipe down easy, plus two strong magnets to keep your rinse cup firmly in place.

Available in two size....large holds a 9 oz cup, small holds a 5 oz cup.

Juan Puente OG Shader

The day has finally come...we now have a Juan Puente Workhorse model! Still built and tuned by Juan, these machines are cnc cut instead of welded and have the standard basic Workhorse finishing touches.

• CNC Cut Iron Frame
• Workhorse Red Oxide Finish
• Deluxe Black Hardware
• 1.25" 8 Wrap Standard Heat Shrink Coils
• Swing Gate Vise Guaranteed to lock tight on any tube
• Slow Speed with a Solid Hit
• 100-105 Hz at 6 V Unloaded
• Weighs 8 Ounces
• Pushing up to 13's All Day

Juan Puente OG Liner

The day has finally come...we now have a Juan Puente Workhorse model! Still built and tuned by Juan, these machines are cnc cut instead of welded and have the standard basic Workhorse finishing touches.

• CNC Cut Iron Frame
• Workhorse Red Oxide Finish
• Deluxe Black Hardware
• 1.25" 6 Wrap Standard Heat Shrink Coils
• Swing Gate Vise Guaranteed to lock tight on any tube
• Medium Speed with a Solid Hit
• 135-140 Hz at 6.5 V Unloaded
• Weighs 7.2 Ounces
  
• Pushing 3-11's Easy

Limited Edition run of Supreme Style OG Flastside Walkers!

We are very stoked to finally release this special edition run of machines that have been in the works for months. From digging up the old pattern, casting frames, various machining tweaks, hand grinding, stamping, polishing, plating, custom coils, quarters straight from the US mint, silver contacts, assembly and fine tuning....these machines are top notch with no expense spared in their creation.

Technical Specs:

• Cast Iron OG Walker Frame
• Hand Ground, Prepped and Lightly Polished Nickel Plated Finish
• Deluxe Nickel Plated Hardware, Plus Silver Contact
• Hand Brazed Collet Vise, great for use with Disposable and Steel Tubes
• 2019 Milled Quarter Spring Saddle, Plus Dime Washers
• 1.25" 8 Wrap Custom Coils
  
• Medium Speed with a Long Stroke and Solid Hit
• Running 100-105 Hz at 6V Unloaded
• Pushing 5's to 11's No Problem
• Weighing in at ounces about 7 ounces
• As always, MADE IN THE USA

Mike Pike Large Mag Clipper Shader

- Built and Tuned Specifically For Large Groupings
- Cast Iron Clipper Frame
- Hand Sanded and Cleaned up with HD Black Powder Coat Finish
- Deluxe Black Hardware
- Soba 0.50" Wide Power A-bar
- 1.25" 8 Wrap Black Taped Coils
- Slow Speed with a Real Heavy Hit
- 95-100 Hz at 6 V unloaded
- Weighs 8 oz
- Pushing 7's to 25's No Problem
- MADE IN THE USA

*For those that might be wondering, Clippers are now built by Mike Pike as part of SOBA's partial machine retirement! Same quality, care, and performance the Clipper has always possessed, just built by another one of our highly qualified builders.

Mike Pike Clipper Power Liner

- Built and Tuned Specifically for Large Grouping Liner Work
- Cast Iron Clipper Frame
- Hand Sanded and Cleaned up with a HD Black Powder Coat Finish
- Deluxe Black Hardware
- Soba 0.50" Wide Power A-bar
- 1.125" 6 Wrap Black Tape Coils
- Slow Speed with a Heavy Hit
- Pushing 7's to 18's Easy
- Running 115-120Hz @ 6.5 V Unloaded
- Weighs 8 oz
- MADE IN THE USA

*For those that might be wondering, Clippers are now built by Mike Pike as part of SOBA's partial machine retirement! Same quality, care, and performance the Clipper has always possessed, just built by another one of our highly qualified builders.

Five-Star Vasocaine

• Clean and Consistent Power
• Volts, Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 2 to 16 Volt Output with Power Burst on startup
• 110 V US electrical plug or 220V EU electrical plug
• Comes with 3 Powerful Quarter Sized Magnets, Feet, and optional Stand
• Weighing in at 1 Pound
• Workhorse Olive Green Powdercoat finish
• 4.25" x 3.6" x 1.35" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Desktop Stand - use included 3m adhesive to attach included magnets to back of power supply, then magnet the supply to the stand
• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

Joshua Bowers lightweight RCA Cord

Designed with function and maintenance in mind, this lightweight RCA Cord is made with the finest components ensuring a reliable and consistent connection.

• Light weight non-stick cord material
• High-grade Switchcraft Gold Right Angle Plug
• High-end matching Amphenol Plug
• 6 foot length
• Very lightweight at a mere 2.3 ounces
• Limited 1 Year Warranty covers product defects, not everyday wear and tear.

• MADE IN THE USA

**GLOVE ORDER RESTRICTION** - MAX 5 BOXES PER ORDER - we are very sorry for the inconvenience, there is a glove shortage and we need to restrict ordering so all of our customers are able to at least get a few boxes to tattoo.

Blackwork Chloroprene Gloves

Made from non-latex polychloroprene synthetic polymer, these new Blackwork medical grade exam gloves offer all of the benefits of natural rubber latex with none of the allergen problems associated with latex. Blackwork gloves were specially formulated / designed to reduce hand fatigue during long tattoo sessions. Using their patented formula, they've created a glove with almost zero resistance while maintaining comfort, elasticity, and strength. Textured finish for wet and dry gripping ability. The first and only black chloroprene medical grade exam glove.

• 100ct. per box.
• Patented Black Chloroprene Formula.
• Zero Resistance, reduced hand fatigue.
• Textured surface for greater grip and tactile sensitivity.
• Smaller box size reduces shipping cost.
• Extreme elasticity
• Easily slide on WET or DRY hands!!

Their new patented Black Chloroprene formula is the most scientifically advanced glove in the Tattoo Industry. Unrivaled protection, Zero resistance, Incredible comfort, and a textured surface with unbelievable tactile sensitivity. 

Joshua Bowers High-Jack

The High-Jack attaches to your workstation magnetically and plugs in to the "machine" port on your power supply effectively moving your clipcord jack 5 feet into the air. This is the ideal position for your clipcord to hang from to keep it off the floor and free from rubbing, tugging, and snagging as you work.

• No more rolling over your cord with your chair
• Keep your cord off the floor
• Reduces the weight hanging off the back of the machine
• Reduces tugs and snags as you tattoo
• Extends the life of your clipcord

A few words from Joshua about The High-Jack:

"The High-Jack is a product I developed to make my clipcord drape and move more easily. The High-Jack magnetically attaches to your work station and plugs in to the Machine port on your power supply. Your clip cord then plugs in to the High-Jack, effectively lifting the clipcord jack 5 feet in to the air. This allows the cord to drape naturally from above you, doesn’t rub on the floor, doesn’t snag across your lap and it takes weight off of the back of the machine easing hand fatigue greatly.

The High-Jack Switch has all the great features of the basic High-Jack with the great new feature of having a switch box at the end to be able to toggle back and forth between two cords. This is a great feature for people using multiple cord types or just want two cords connected so they don’t have to switch cords back and forth. The toggle move from side to side selecting which cord is powered with off in the middle, so you can run on constant and turn your machine off at the High-Jack.

I have been using this product for over a year now, along with the rest of my shop. We were originally just testing them out but I speak for me and the rest of the shop when I say that we can’t imagine tattooing without them now."