Joshua Bowers Micro-Liner Rotary Tattoo Machine

Now with a Swing Gate Vise that works great with all tubes! 

Highlights:

• 3 Piece Bolt-Up Body
• Blackened Steel Vise and Spring Shelf
• Anodized Black Aluminum Body
• Deluxe Brass Hardware
• Now with Bowers Brass Weighted Wingnut for better balance

Specifications:

• Runs best between 6-7 Volts
• Pushes any grouping with ease
• Weighs 3.65 oz

Made in the USA

A few words from Joshua about this machine:

"This machine is designed, built and tuned to run like a coil machine. The tuning is in the frame geometry and setup so there's no knobs or settings to fall out of adjustment. Ready to tattoo out of the box. Light, but not too light. Very punchy and snappy on the tip of the stroke and backs off slightly in the middle of the stroke. Great for sculpting fine finesse lines ran off the needle tips and also great for burying a large grouping liner and pulling a solid single pass line quickly."
Joshua Bowers Micro Liner Care Instructions

Joshua Bowers Rubber Band Placement Diagram

Joshua Bowers Big Can Rotary Tattoo Machine

Highlights:

• 3 Piece Bolt-Up Body
• Black Zinc Finish
• Deluxe Brass Hardware
• Now with Bowers Brass Weighted Wingnut for better balance

Specifications:

• Runs best around 7-7.6 Volts
• Pushes any grouping with ease
• Weighs 4.75 oz

Made in the USA

A few words from Joshua about this machine: 
Super smooth and consistent machine. Powerful through the whole stroke but designed to back off slightly in the middle and back end of the stroke to prevent overworking the skin. Super versatile, great for color saturation, blending, and even black and gray. Plenty of stroke to hang out for nice traditional whips or back it up and increase the voltage for smooth saturation. Has a penetrating stroke down to 4 volts which is great for stippling.
Joshua Bowers Big Can Care Instructions

Joshua Bowers Rubber Band Placement Diagram

Workhorse Synthetic Oil

High Quality Synthetic Oil for use with rotary machines as well as high friction areas on coil machines. Also works well as a general oil on frames and parts. Comes standard in our Precise Pen Tip Applicator.

Standard Workhorse Needles on Bar

High quality, tried-and-true needles on bar: no frills, just precision and reliability. Developed with decades of expertise, our standard needles ensure quality and consistency at an affordable price. Carefully crafted for unrivaled performance, each come with unique configurations and quality assurance for every tattoo.

Specifications:

• #12 Needles on all Traditional Groupings
• #10 Needles on all Tight Groupings / Bugpins
  
• Made with High Quality Japanese Steel
• Light Texture to help hold pigment on the needle as it enters the skin (not an excessive amount though that would cause any additional trauma)
• Easy to open flip top box

*Please let us know if we don't have any groupings you need, and we will add them to the line up

Mike Pike Teacup Shader

Highlights:

• Black Zinc CNC Cut Iron Frame
  
• Standard Blackened Hex Hardware
• 1.25" Deluxe 8 Wrap Coils with Gaffers Tape

Specifications:

• Smooth with a Solid Hit, running 105-110 Hz @ 6.5 V unloaded
  
• Pushing 5's to 11's with ease
  
• Tough and Versatile, a true Workhorse
  
• Weighs 8.10 oz
  
  

Made in the USA

Mike Pike Teacup Liner

Tough and versatile, this liner machine designed by Mike Pike is a true workhorse.

Highlights:

• Black Zinc CNC Cut Iron Frame
• 1 1/8" Deluxe 6 Wrap Coils with Gaffers Tape
• Deluxe Blackened Hardware
• Side Mount Rear Binder

Specifications:

• Running Quick and Steady with a Medium Hit
• 150-155Hz @ 6.5 V unloaded
• Pushing 3's to 9's all day long
  
• Weighs 7.3 oz
  
  

Made in the USA

Mike Pike Brass Jonesy Shader

Highlights:

• CNC Cut Billet Brass Frame with PIKE Stamp
• Deluxe Blackened Workhorse Hardware
• Over Under Rear Binder Setup
• Custom Designed Pike Vise
• " 8 Wrap Gaffer Taped Coils

Specifications:

• Fast Shader /Slow Liner with a Hard Hit
• Running 125 -130 Hz @ 6.5V Unloaded
• Pushing 5's-11's with Ease
• Weighs 8 Ounces

Made in the USA

Mike Pike Brass Jonesy Liner

Highlights:

• CNC Cut Billet Brass Frame with PIKE Stamp
• Deluxe Blackened Workhorse Hardware
• Over Under Rear Binder Setup
• Custom Designed Pike Vise
• 1" 8 Wrap Gaffers Taped Coils

Specifications

• Quick with a Solid Medium Hit
• Running 150 -160 Hz @ 6.5V Unloaded
• Pushing 3's-9's All Day
• Weighs 8 Ounces
  

Made in the USA

Workhorse Zipper Pouch done in Collaboration with Sidnaw Company (formerly Mercy Supply)

Handcrafted locally by renowned artisan Rusty Zylstra, these Workhorse exclusives are made from the same Canvas as our Workhorse Mercy Aprons and are ready to hold anything you can fit in them! Perfect for pens, pencils, markers, paint brushes, etc.....

Details:
- 10 oz waxed canvas made in the USA and strong enough to withstand disinfectant sprays and wipes
- Hand hammered solid copper rivets
- 5 oz durable leather pull strap
- 5" x 9"
- YKK Snap

*DO NOT PUT IN WASHING MACHINE, DO NOT DRY CLEAN, SPOT CLEAN ONLY.

Mike Pike Half Cup Shader

Highlights:

• CNC Cut Iron Frame with PIKE Stamp
• Workhorse Red Oxide Finish
• Standard Blackened Workhorse Hardware
• 1" 8 Wrap Black Heat Shrink Mini Coils

Specifications:

• Shaders are Quick with a Hard Hit
• Running 100-105 Hz @ 6.5V unloaded
• Pushing 7's-15's Easy
• Weighs a mere 6.5 oz

Made in the USA

Mike Pike Half Cup Liner

Highlights:

• CNC Cut Iron Frame with PIKE Stamp
• Workhorse Red Oxide Finish
• Standard Blackened Workhorse Hardware
• 1" 8 Wrap Black Heat Shrink Mini Coils

Specifications:

• Very Quick with a Medium Hit
• Running 145-155Hz @ 6.5 V unloaded
• Pushing 3's-9's Easy
• Weighs a mere 6.5 oz

Made in the USA

Mike Pike Bullseye Liner with Swing Gate

Highlights: 

• CNC Cut Iron Frame
• Workhorse Red Oxide Finish
• Deluxe Blackened Hardware
• Spring Loaded Swing Gate Vise
• 1" 8 Wrap Taped Coils

Specifications:

• Medium Speed with a Hard Hit
• Running 125 - 135 Hz @ 6.5V unloaded
• Pushing 3's-11's with ease
• Weighs 7.2 oz

Made in the USA

Workhorse Aprons done in Collaboration with Sidnaw Company (formerly Mercy Supply)!

Handcrafted locally by renowned Marcy Supply artisan Rusty Zylstra, these Workhorse exclusives are designed specifically for use in tattooing. These new Leg Aprons offer an excellent alternative to wearing a full apron while still protecting your pants from ink, blood, and other pathogens....no more ruined clothes!

Apron Details:
- Long cut to ensure your knee stays covered when seated
- 10 oz waxed canvas made in the USA and strong enough to withstand the strongest disinfectant sprays and wipes....simply wipe down with your favorite disinfectant to kill anything between tattoos
- Hand hammered solid copper rivets
- 5 oz durable, adjustable leather straps that fastens on the side like a belt would, plus a convenient quick release option
– excess strap can be tucked back in behind the brass buckle or cut off
- Solid brass buckles
- Finished with canvas trim around all edges
- Reversible for use with either your right or left leg

*DO NOT PUT IN WASHING MACHINE, DO NOT DRY CLEAN, SPOT CLEAN ONLY.

Workhorse Aprons done in Collaboration with Sidnaw Company (formerly Mercy Supply)

Handcrafted locally by renowned artisan Rusty Zylstra, these Workhorse exclusives are designed specifically for use in tattooing with features not found amongst other products offered by Mercy Supply.

Apron Details:
- Extra long cut with a wider bottom to ensure your legs stay covered when seated
- 10 oz waxed canvas made in the USA and strong enough to withstand disinfectant sprays and wipes
- Double bottom upper chest pockets to hold your phone and drawing utensils...no lower pockets to get in the way, bunch up, or catch disease
- Hand hammered solid copper rivets
- 5 oz durable, adjustable leather straps that fastens on the side like a belt would
– excess strap can be tucked back in behind the brass buckle
- Solid brass buckles
- Finished with leather trim around all edges

*DO NOT PUT IN WASHING MACHINE, DO NOT DRY CLEAN, SPOT CLEAN ONLY.

**These BASIC Aprons are the same as the DELUXE but with cotton trim instead of leather trim, plus a quick release heavy duty clip on the waist strap.

Workhorse Aprons done in Collaboration with Sidnaw Company (formerly Mercy Supply)

Handcrafted locally by renowned artisan Rusty Zylstra, these Workhorse exclusives are designed specifically for use in tattooing with features not found amongst other products offered by Mercy Supply.

Apron Details:
- Extra long cut with a wider bottom to ensure your legs stay covered when seated
- 10 oz waxed canvas made in the USA and strong enough to withstand disinfectant sprays and wipes
- Double bottom upper chest pockets to hold your phone and drawing utensils...no lower pockets to get in the way, bunch up, or catch disease
- Hand hammered solid copper rivets
- 5 oz durable, adjustable leather straps that fastens on the side like a belt would, plus a quick release heavy duty clip on the waist strap
– excess strap can be tucked back in behind the brass buckle
- Solid brass buckles
- Finished with cotton trim around all edges

*DO NOT PUT IN WASHING MACHINE, DO NOT DRY CLEAN, SPOT CLEAN ONLY.