Limited Sparkle Red x Gold

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Highlights:

• CNC Cut Iron with the highest precision and care
• 1" Custom Keg Coil
• Custom Fractured Red Powder Coat Finish
• Deluxe 24K Gold Plated Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz
  

Made in the USA

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Teacup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Black Destroy Troy Cray Bar with added weight on the front end
  
• Light Pink x Neon Yellow Powder Coated Aluminum Frame
• Matching Steel Destroy Troy Forward-Weighted Guillotine Vise
• All Black Hardware
  
• Stainless Springs
• Custom Matching 1.125" Coils

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Highlights:

• CNC Cut Iron Cracker Liner Frame with Lightened / Drilled out Upright
• Custom Slide Vise with Inlaid Insert 
• Multicolored Powder Coat Finish
• Blackened Workhorse Hardware PLUS Custom Dice Contact
  
• 8 Wrap 1" Custom Coils

Specifications:

• Medium Speed with a Hard Hit
• Great Liner for Traditional Work
• 130-135 Hz. @ 6 V unloaded
• Pushes 5s to 11s with Ease
  

Made in the USA

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• Full Size Frame milled in house from a solid block of Ductile Iron
• HD Flat Black Powder Coat Finish
• Deluxe Workhorse Hardware with Black Oxide Finish
• Swing Gate Steel Vise
• Custom 8 Wrap 1.25" Coils
  
• High End Specialty Steel Springs
• Solid Copper Contact 
• Reverse Rear Binder Setup with frame ground on coil deck

Typical Shader Specs:

• Long Stroke with a solid hit great for 5s to 15s
  
• Medium Speed, running around 105-110 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• Full Size Frame milled in house from a solid block of Ductile Iron
• HD Flat Black Powder Coat Finish
• Deluxe Workhorse Hardware with Black Oxide Finish
• Swing Gate Steel Vise
• Custom 6 Wrap 1.25" Coils
• High End Specialty Steel Springs
• Solid Copper Contact
• Reverse Rear Binder Setup with frame ground on coil deck

Typical Liner Specs:

• Long Stroke with a solid hit great for 5s to 14s
  
• Medium Speed, running around 135-140 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Highlights:

• CNC Cut Iron Micro Jones Shader Frame
  
• Bead Blast Finish Ready for any finish 
• Seth Deluxe Blackened Hardware
  
• Seth Side Facing Guillotine Vise
• Deluxe Blackened Hardware
• 1" 8 Wrap Custom Soldered Coils
• Liner Armature Bar
• 2 Spring Sets with each kit
• All Screws you'll need PLUS necessary wrenches (you will need a flat head screwdriver though)
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Shader Specs:

• Medium Slow Speed with a Hard Hit
  
• Running 100-105 Hz @ 6 V Unloaded
  
• Pushing 5's to 15's All Day
  
• Weighs 7.2 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Micro Jones Liner Frame
  
• Bead Blast Finish Ready for any finish 
• Seth Deluxe Blackened Hardware
  
• Seth Side Facing Guillotine Vise
• Deluxe Blackened Hardware
• 1" 8 Wrap Custom Soldered Coils
• Liner Armature Bar
• 2 Spring Sets with each kit
• All Screws you'll need PLUS necessary wrenches (you will need a flat head screwdriver though)
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specs:

•  Medium Quick Speed with a Hard Hit
  
• Running 135-140 Hz @ 6 V Unloaded
  
• Pushing 3's to 14's Easy
  
• Weighs 7.2 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Limited Nickel x Nickel

Highlights:

• CNC Cut Iron Tetris Liner Frame with Nickel Plated Finish 
• 1" Custom Reflective Keg Coil
  
• Deluxe Polished Nickel Plated Binders, A-bar, and Thumbscrew

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's... also able to push very large groupings if you bump the volts up a bit
• Runs 110-115 Hz @ 6.5 Volts Unloaded
• Weighs 6.5 oz
  

Made in the USA

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with Seafoam Powder Coat Finish
  
• Blackened Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Joshua Bowers Rubber Band Placement Diagram

Highlights:

• CNC Cut Iron Cracker Liner Frame with Lightened / Drilled out Upright
• Custom Slide Vise with Inlaid Insert 
• Multicolored Powder Coat Finish
• Blackened Workhorse Hardware PLUS Custom Dice Contact
  
• 8 Wrap 1" Custom Coils

Specifications:

• Medium Speed with a Hard Hit
• Great Liner for Traditional Work
• 130-135 Hz. @ 6 V unloaded
• Pushes 5s to 11s with Ease
  

Made in the USA

Limited Eddy Deutsche V2 Blade Runner Liners now in a more compact frame! Same great power and precision, less weight and bulk. 

Highlights:

• Liner + Shader PAIR of Machines
• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Illusion Purple Powder Coat Finish
  
• Polished Nickel Deluxe Hardware
  
• Pure Silver Contact
  
• Eddy Deutsche Magic
• Custom Hand Wound 8Wrap Coils with Purple Reflective Tape

Liner Specifications:

• Medium / Quick Speed with a Solid Hit
• Medium Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running around 130-135 Hz Unloaded at 6.5 - 7.5 Volts
  
• Great for single pass quick and solid lines with 5s to 11s, turn up for 14s
  

Shader Specifications:

• Medium / Quick Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running around 115-120 Hz Unloaded
  
• Eddy prefers to run these hard at 7-8 Volts, but also work well at lower voltage for a bit less aggressive tattooing 
• Great for fast color packing with 5s to 13s, turn up for 15s
  
• Weighs 6.5 oz

Made in the USA

Limited Edition Black x Black with black and pink coils 

Less frame, less coil, more vise for an even more forward weighted experience - this is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Halfcup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. 

These have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clip cord and reduce hand fatigue
• Black Destroy Troy Cray Bar with added weight on the front end
  
• HD Matte Black Powder Coated Aluminum Frame
• Steel Destroy Troy Forward-Weighted Guillotine Vise
• All Black Hardware
  
• Stainless Springs
• Custom 1" 9 Wrap x 7 Wrap forward weight coil black and pink combo

Specifications:

• Medium Speed with a Solid Hit
• Running around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine

Made in the USA

Limited Nickel x Nickel

Highlights:

• CNC Cut Iron Tetris Liner Frame with Nickel Plated Finish 
• 1" Custom Reflective Keg Coil
  
• Deluxe Polished Nickel Plated Binders, A-bar, and Thumbscrew

Specifications:

• Medium speed with enough power to push 3's to 14's no problem
• Tuned for all-day, every-day street shop and/or custom tattooing
• Runs about 130 Hz @ 6.5 Volts Unloaded, crank up to 7-8 Volts for large groupings
  
• 6.5 oz weight
  

Made in the USA

Limited Edition Raspberry x Gold

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guaranteed to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time. 

Highlights:

• Limited Edition Run of Transparent Raspberry Powder Coat. 24k Gold Plated Motor Cap, Swing Gate Vise, and Hardware
• High-grade Aluminum body precision milled frames and components
• Powered by a top of the line Maxon motor described by Mike Pike to be "the best motor [he has] ever used in a rotary"
• Clip cord connection
• Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
• Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy

Specifications:

• Pushes up to 25 mag and up to 18 Rounds no problem
• Great with needle on bar or cartridges
• Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
• Lightweight at a mere 4.5 oz

Made in the USA

KYŌDAI FLEX-TIP Brush Pen 

The Kyodai Brush Pen, also known as a fudepen (筆ペン), combines surgical-grade pigment with the flow and control of traditional fudepens. Its brush-like tip glides effortlessly across skin, giving artists smoother ink flow, better coverage, and precise control for calligraphy, freehand stencils, or detailed linework.

The FLEX-TIP brush pen mimics the flexibility and versatility of an artist's paintbrush. Its tapered, flexible bristles make it responsive to pressure variations allowing for varying line widths and expressive strokes. Popular among tattooers for calligraphy, illustrating, and stylized dynamic lines. The brush tip's adaptability enables both fine details and broader lines, providing artists with a versatile tool for creative expression.

Available in:

• Gentian Violet
• Tokyo Red