New Seth Ciferri Weiner Dog Liner 2.3! 

Same great performance and geometry as the lightweight and middleweight versions, but now with an Aluminum Frame and inlaid Steel Guillotine Vise. With slightly less overall weight than the 2.2 MW version, the 2.3 shifts the weight forward creating a better balance with more weight over the hand offsetting clip cord pull. 

- CNC Machined Aerospace Aluminum Frame with Black Anodized Finish
- Steel Inlaid Guillotine Vise with a durable Black Oxide Finish
- Spring Loaded Vise Guaranteed to Lock Tight on Any Tube
- Deluxe Black Seth Hardware and Custom Cast Workhorse Wingnut
- 1" 8 Wrap Taped Coils Plus Capacitor Strap
- Medium Speed with a Hard Hit To push Larger Groupings
- Running 130-135 Hz @ 6 V Unloaded
- Pushing Loose 5's to 14's Easy
- Weighing in at a mere 5.65 oz
- MADE IN THE USA

Limited Edition BRASS Seth Ciferri Doorbell Liner!

Technical Specs:

• Brass Version Laser Cut and Bent English Doorbell Reproduction Frame
  
• Brazed Spring Shelf
• Bolt on Deluxe Steel Vise with Slide Mechanism to lock tight on any tube
• Highly Durable, Oxidation Resistant Blackened Finish
• NEW Weighted Armature with Extra Thick Nipple
• Deluxe Brass Binders
  
• Thick Base for better conductivity and less heat
• 1" 8 Wrap Custom Coils
• Medium Speed with a Solid Hit
• Running 125-130 Hz at 6V Unloaded
• Pushing 3's to 14's No Problem
• Weighing in at a compact and balanced 7.3 ounces with weight over hand and little cord pull
  
• As always, MADE IN THE USA

Here are a few words from Seth on this new machine:

This is a frame style I’ve been wanting to do for a long time, and finally got around to making it happen. Based almost entirely on an English doorbell I found at a flea market, with exact geometry, it hits HARD and can push any liner grouping on very low voltage and amps. PLUS I added in a new vise lock mechanism that holds any  tubes.

The response to these new doorbell liners has been overwhelming and exciting. It’s been a long time since I’ve designed and built a machine that gets me this hyped!

I think I’ve cracked the code on this one, my friends. Compact and sturdy, built to last a lifetime. 

Limited Seth Ciferri Modern Classic Liner

After many years, Seth has given his Classic Liner and Shader some major updates, reworking the entire frame and geometry to create this Modern Classic. With sculpted curves, various subtractions and additions, these aluminum frames are done right so there is no extra twang or vibration. Leaving the user with a highly functional, lightweight, forward balanced machine, easy on the wrist and appealing to the eyes. An all around Workhorse with a modern touch.

Technical Specs:

• Lightweight CNC Cut Aluminum Frame
• Distressed Black Anodized Finish
• Deluxe Black Steel Hardware, including Pinch Tightening Front Binder and Inlaid Steel Rear Binder for a Better Connection
• Side Facing Guillotine Vise, great for use with Disposable and Steel Tubes
• Inlaid 1/4" Iron Coil Yoke for Better Performance and Less Vibration
• Custom 1" 8 Wrap T-top Red Tape Coils
• Medium Quick Speed with a Solid Hit
• Running 140-145 Hz at 6V Unloaded
• Pushing 3's to 11's No Problem
• Weighing in at a mere 5.5 ounces!
• As always, MADE IN THE USA

Here are a few words from Seth on the evolution of his "Classic":

Seth Ciferri Cholomatic™ Liner V2

Updated version of Seth's only machine built and designed as a dedicated single needle liner for fine line work. New updated version includes shorter geometry utilizing his steel slide vise from his Doorbell machines on a very lightweight Aluminum frame. These are by far the best version yet, they are more compact with less weight, plus a chunky steel vise to reduce noise and vibration.

- Black Anodized Aerospace Aluminum Chopped Cholomatic™ Liner Frame
- Blackened Steel Slide Vise
- Black Deluxe Hardware
- 1.125" 8 Wrap Workhorse Coils
- Quick with a Soft Hit
- Perfect for Stippling and Extra Fine Lines
- Running 150- 155 Hz @ 6 V Unloaded
- Best Pushing 1's to 3's
- Well Balanced 6.4 Ounce Weight
- MADE IN THE USA

Seth Ciferri Doorbell Liner!

Technical Specs:

• Laser Cut and Bent Steel English Doorbell Reproduction Frame
  
• Welded Spring Shelf
• Bolt on Deluxe Steel Vise with Slide Mechanism to lock tight on any tube
• Highly Durable, Oxidation Resistant Blackened Finish
• NEW Weighted Armature with Extra Thick Nipple
• NEW Narrow Stainless Rear Spring
• Deluxe Brass Binders
  
• Thick Base for better conductivity and less heat
• 1" 8 Wrap Custom Coils
• Medium Speed with a Solid Hit
• Running 125-130 Hz at 6V Unloaded
• Pushing 3's to 14's No Problem
• Weighing in at a compact and balanced 7 ounces with weight over hand and little cord pull
  
• As always, MADE IN THE USA

Here are a few words from Seth on this new machine:

This is a frame style I’ve been wanting to do for a long time, and finally got around to making it happen. Based almost entirely on an English doorbell I found at a flea market, with exact geometry, it hits HARD and can push any liner grouping on very low voltage and amps. PLUS I added in a new vise lock mechanism that holds any  tubes.

The response to these new doorbell liners has been overwhelming and exciting. It’s been a long time since I’ve designed and built a machine that gets me this hyped!

I think I’ve cracked the code on this one, my friends. Compact and sturdy, built to last a lifetime.