New Version 3 Adam Ciferri Ghost Dog Liner!

• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care
• Now a Mini-Size frame with 1" 16 Wrap Keg Coils
• Standard Workhorse Red Oxide Finish
• Standard Workhorse Blackened Hardware
• Weighs 6 oz
• MADE IN THE USA

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Seth Ciferri Belmont Liner

- CNC Cut Belmont Liner Frame
- Seth Ciferri Drop Down Vise Allowing for More Space
- Black Zinc Finish
- Blackened Workhorse Hardware
- 1" 8 Wrap Workhorse Coils
- Medium Slow Speed
- Seth's Hardest Hitting Liner
- Running 125-130 Hz @ 6 V Unloaded
- Pushing 7's to 18's All Day
- Weighs 6.98 Ounces
- MADE IN THE USA

Seth Ciferri Mini Fastback Liner

- CNC Cut Iron Mini Fastback Liner Frame
- Black Zinc Finish
- Black Workhorse Hardware and Coin Thumbscrew
- Spring Loaded Swing Gate Vise Guaranteed to Lock Down on Any Tube
- 1" 8 Wrap Workhorse Coils
- Medium Slow Speed with a Medium Hard Hit
- Running 125-130 Hz @ 6 V Unloaded
- Pushing 5's to 11's No Problem
- Weighs 7.2 oz
- MADE IN THE USA

Mike Pike Clipper Power Liner

- Built and Tuned Specifically for Large Grouping Liner Work
- Cast Iron Clipper Frame
- Hand Sanded and Cleaned up with a HD Black Powder Coat Finish
- Deluxe Black Hardware
- Soba 0.50" Wide Power A-bar
- 1.125" 6 Wrap Black Tape Coils
- Slow Speed with a Heavy Hit
- Pushing 7's to 18's Easy
- Running 115-120Hz @ 6.5 V Unloaded
- Weighs 8 oz
- MADE IN THE USA

*For those that might be wondering, Clippers are now built by Mike Pike as part of SOBA's partial machine retirement! Same quality, care, and performance the Clipper has always possessed, just built by another one of our highly qualified builders.

Adam Ciferri Workhorse Version Ghost Dog Compression Machine. Same function and performance as the high-end Compression machine, just a simpler finish and basic components.

• Tuned for all-day, every-day street shop and/or custom tattooing
• Adjustable to accommodate any style of tattooing, simply adjust the compression spring after the machine is broken in
• Initially comes set up as a shader / power liner, good for Quick Color Packing or B&G Work / Color Blends
• CNC Cut Iron with the highest precision and care
• Mini frame with 1" Custom Keg Coil
• Classic Workhorse Red Oxide Finish
• Basic Black Hardware
• Weighs in at a mere 6 oz
• MADE IN THE USA

A few words from Adam addressing Frequently Asked Questions:

1) Is this a liner or a shader? Yes. Adjust the gap and the compression spring via the adjustment screw beneath the frame and you’ve got a whole lot of range that will make a whole spectrum of tat wizardry possible.

2) Will it push cartridges? Yes, once it’s broken in a bit, you can get down however you’d like-I certainly won’t judge you.

3) How long does it take to break in? 1-2 hours of tattooing should do it. How much does it weigh? 5.8 ounces.

4) What types of needle groupings will this thing push? 5 needle outlines and up, 7 mags and up.

Adam Ciferri Ghost Dog Compression Machine

• Tuned for all-day, every-day street shop and/or custom tattooing
• Adjustable to accommodate any style of tattooing, simply adjust the compression spring after the machine is broken in
• Initially comes set up as a shader / power liner, good for Quick Color Packing or B&G Work / Color Blends
• CNC Cut Iron with the highest precision and care
• Mini frame with 1" Custom Keg Coil
• Classic Black Finish
• Deluxe Plated Hardware
• Weighs in at a mere 6 oz
• MADE IN THE USA

A few words from Adam addressing Frequently Asked Questions:

1) Is this a liner or a shader? Yes. Adjust the gap and the compression spring via the adjustment screw beneath the frame and you’ve got a whole lot of range that will make a whole spectrum of tat wizardry possible.

2) Will it push cartridges? Yes, once it’s broken in a bit, you can get down however you’d like-I certainly won’t judge you.

3) How long does it take to break in? 1-2 hours of tattooing should do it. How much does it weigh? 5.8 ounces.

4) What types of needle groupings will this thing push? 5 needle outlines and up, 7 mags and up.

New Chris Smith Supreme Liner! Built with an aluminum upright and ass end with a steel base/vise, these half and half machines are lightweight, well-balanced, and built for all day everyday tattoos.

• CNC Cut Aluminum Frame
• Steel Base and Vise Inlaid into the Aluminum Frame
• Deluxe Blackened Steel Hardware, Spring Saddle, and Clip Cord Yoke Screw
  
• 6 Wrap 1.25” Tape Coils with Oversized Cap
  
• Pushes 5’s to 14’s Easy
• Slow and Steady with a Heavy Hit
  
• 120-130 Hz at 6.5 V unloaded
• Weighing in at a mere 5.6 oz
  
• MADE IN THE USA