Mike Pike Half Cup Liner Machine Kit
Mike Pike Half Cup Liner Machine Kit
Mike Pike Half Cup Liner Machine Kit
Mike Pike Half Cup Liner Machine Kit
Mike Pike Half Cup Liner Machine Kit
Mike Pike Half Cup Liner Machine Kit
Workhorse Irons

Mike Pike Half Cup Liner Machine Kit

$225.00 USD $175.00 USD
Grouping Price Inventory Quanity
No Armature Fixture + Alignment Tool $175.00 USD Sold Out
With Armature Fixture + Alignment Tool $210.00 USD Sold Out

Not typically offered special edition Mike Pike Tattoo Machine Kits, plus optional armature bar fixture and alignment tool!

Special Limited Edition run of Mike Pike Half Cup Machine Kits!

Kit includes all parts needed to build a great tattoo machine...however it does not include the skills to build a great tattoo machine, sorry not sorry :)

- CNC Cut Iron Pike Half Cup Frame, the mini version of the famous full size Mike Pike Teacup frame
- Raw Finish Ready for paint, powder coat, oxide, or torch finish
- Deluxe Workhorse Blackened Hardware
- Armature Bar
- Steel binding posts
- 2 Spring Sets with each kit
- 1" 8 Wrap Soldered Workhorse Coils 
- All Screws you'll need PLUS necessary wrenches
- Washer Package including all washers needed... (steel, fiber, and shims)

Liner typical specs:

- Liners are Very Quick with a Medium Hit
- Running 145-155Hz @ 6.5 V Unloaded
- Pushing 3's-9's Easy
- Weighing a Mere 6.5 Oz

Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Customer Reviews

Based on 1 review Write a review

You may also like

PREVIEW
6 Wrap Coils
6 Wrap Coils
Workhorse Irons
$27.00 USD
PREVIEW
8 wrap Coils
8 Wrap Coils
Workhorse Irons
$27.00 USD
PREVIEW
Aaron Cain Springs
Aaron Cain Springs
Workhorse Irons
$10.00 USD
PREVIEW
Josh Bowers Weighted Thumbscrew
Josh Bowers Weighted Thumbscrew
Workhorse Irons
$20.00 USD
6 Wrap Coils
6 Wrap Coils
Workhorse Irons

6 Wrap Coils

$27.00 USD
Grouping Price Inventory Quanity
Full 1.25" $27.00 USD Available
1.125" $27.00 USD Available
6 Layer coils hand wrapped. One Pair, Not soldered, No Capacitor.

Available as 1.25" Full Size and 1.125" Coils.
8 wrap Coils
8 wrap Coils
Workhorse Irons

8 Wrap Coils

$27.00 USD
Grouping Price Inventory Quanity
Full 1.25" $27.00 USD Available
Mini 1" $27.00 USD Available
1.125 $27.00 USD Available
8 Layer coils hand wrapped . One Pair, Not soldered, No Capacitor.

Available as either 1" Mini Coils, 1.125" Coils or 1.25" Full Size Coils.
Aaron Cain Springs
Aaron Cain Springs
Workhorse Irons

Aaron Cain Springs

$10.00 USD
Grouping Price Inventory Quanity
Shader $10.00 USD Available
Liner $10.00 USD Available
5Brid Liner/Shader $10.00 USD Available
Each spring set includes: fully punched 18 gauge front and rear springs.

Aaron Cain Liner Spring Set: All Aaron Cain Liners
Aaron Cain Shader Spring Set: All Aaron Cain Shaders
Aaron Cain 5brid Spring Set: Aaron Cain 5brid Liner/Shader
Josh Bowers Weighted Thumbscrew
Josh Bowers Weighted Thumbscrew
Josh Bowers Weighted Thumbscrew
Josh Bowers Weighted Thumbscrew
Workhorse Irons

Josh Bowers Weighted Thumbscrew

$20.00 USD

These turned and knurled brass thumb screws add weight to the front of your machine helping with balance, vibration and needle penetration. Drilled and tapped 8-32 on the edge and through the center to give you two mounting options, they will replace most standard wing nuts. Adding weight to the front of the machine allows the needle to push against that mass as it drives down to the skin, giving you an advantage for more solid, stable lines and allowing you to not have to hold your machine so tight.

Adam Ciferri Pitbull Liner Kit
Adam Ciferri Pitbull Liner Kit
Adam Ciferri Pitbull Liner Kit
Adam Ciferri Pitbull Liner Kit
Workhorse Irons

Adam Ciferri Pitbull Liner with Swing Gate Kit

$220.00 USD

Adam Ciferri Pitbull Liner Kit

Includes everything needed to build a nice tattoo machine...

- CNC Cut Iron Pitbull Frame
- Standard Workhorse Red Oxide Finish on Frame
- Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
- Armature Bar
- Steel binding posts and Chris Smith copper contact screw
- 2 Spring Sets with each kit
- 1.125" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
- Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
- All Screws you'll need, and some extras. 
- Wrenches
- Washer Package including all washers needed... (steel, fiber, and shims)

Customer Reviews

Based on 2 reviews Write a review
Next: Mike Pike Halfcup Shader Machine Kit
Back to Tattoo Hardware
Next: Mike Pike Halfcup Shader Machine Kit

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael Silva
Amazing product

Extremely happy with the machine kit. With this kit I was able to put together a very fast, snappy, and clean liner. Worth every penny and I recommend anyone to take advantage of such a great deal.

User picture User picture