Workhorse Replacement Swing Gate Vise
Workhorse Replacement Swing Gate Vise
Workhorse Replacement Swing Gate Vise
Workhorse Replacement Swing Gate Vise
Workhorse Irons

Workhorse Replacement Swing Gate Vise

$65.00 USD
New Swing Gate Replacement Tube Vise!

- CNC Milled Low Carbon Steel
- Spring Loaded Swing Gate Vise designed by Seth Ciferri
- Slotted Coil Holes for Adjust-ability to Fit Most Any Frame
- Durable Black Zinc Finish
- Comes with Swing Arm, Thumbscrew, Various Length Torx Coil Screws to Account for Base Thickness, plus Extra Swing Arm Springs

You may also like

6 Wrap Coils
6 Wrap Coils
Workhorse Irons
$27.00 USD
8 wrap Coils
8 Wrap Coils
Workhorse Irons
$27.00 USD
Aaron Cain Springs
Aaron Cain Springs
Workhorse Irons
$10.00 USD
Josh Bowers Weighted Thumbscrew
Josh Bowers Weighted Thumbscrew
Workhorse Irons
$20.00 USD
6 Wrap Coils
6 Wrap Coils
Workhorse Irons

6 Wrap Coils

$27.00 USD
Grouping Price Inventory Quanity
Full 1.25" $27.00 USD Available
1.125" $27.00 USD Available
6 Layer coils hand wrapped. One Pair, Not soldered, No Capacitor.

Available as 1.25" Full Size and 1.125" Coils.
8 wrap Coils
8 wrap Coils
Workhorse Irons

8 Wrap Coils

$27.00 USD
Grouping Price Inventory Quanity
Full 1.25" $27.00 USD Available
Mini 1" $27.00 USD Available
1.125 $27.00 USD Available
8 Layer coils hand wrapped . One Pair, Not soldered, No Capacitor.

Available as either 1" Mini Coils, 1.125" Coils or 1.25" Full Size Coils.
Aaron Cain Springs
Aaron Cain Springs
Workhorse Irons

Aaron Cain Springs

$10.00 USD
Grouping Price Inventory Quanity
Shader $10.00 USD Available
Liner $10.00 USD Available
5Brid Liner/Shader $10.00 USD Available
Each spring set includes: fully punched 18 gauge front and rear springs.

Aaron Cain Liner Spring Set: All Aaron Cain Liners
Aaron Cain Shader Spring Set: All Aaron Cain Shaders
Aaron Cain 5brid Spring Set: Aaron Cain 5brid Liner/Shader
Josh Bowers Weighted Thumbscrew
Josh Bowers Weighted Thumbscrew
Josh Bowers Weighted Thumbscrew
Josh Bowers Weighted Thumbscrew
Workhorse Irons

Josh Bowers Weighted Thumbscrew

$20.00 USD

These turned and knurled brass thumb screws add weight to the front of your machine helping with balance, vibration and needle penetration. Drilled and tapped 8-32 on the edge and through the center to give you two mounting options, they will replace most standard wing nuts. Adding weight to the front of the machine allows the needle to push against that mass as it drives down to the skin, giving you an advantage for more solid, stable lines and allowing you to not have to hold your machine so tight.

Adam Ciferri Pitbull Liner Kit
Adam Ciferri Pitbull Liner Kit
Adam Ciferri Pitbull Liner Kit
Adam Ciferri Pitbull Liner Kit
Workhorse Irons

Adam Ciferri Pitbull Liner with Swing Gate Kit

$220.00 USD

Adam Ciferri Pitbull Liner Kit

Includes everything needed to build a nice tattoo machine...

- CNC Cut Iron Pitbull Frame
- Standard Workhorse Red Oxide Finish on Frame
- Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
- Armature Bar
- Steel binding posts and Chris Smith copper contact screw
- 2 Spring Sets with each kit
- 1.125" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
- Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
- All Screws you'll need, and some extras. 
- Wrenches
- Washer Package including all washers needed... (steel, fiber, and shims)

Customer Reviews

Based on 2 reviews Write a review
Next: Workhorse Yokes
Back to Tattoo Hardware
Next: Workhorse Yokes

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
T.C.
Killer Vice!

I love the shape of the vice, plus it’s spring loaded and they do give you extra spring incase you loose it or it just gets old. It’s able to expand to pretty much any frame you’re trying to upgrade. In my case I cut the vice off a S&R Puma and now it looks so much better. Gives it a lil more weight up front and if you braze a support bar from right below the spring deck to the upright, well now we’re talking. I just bent and used an old screw and oil dipped that baby to match the new spring loaded vice with some new coils and Abar to work with the new geometry of the frame and 🤌🏼✨ plus you can get Abars and springs and new black screws all right here to make your old Piece of junk into a screamin demon ready to bring the fire to the next person that walks in the door. Thanks y’all at Workhorse Irons for having everything I need. And try their needles 👌🏻