Eco-responsible, antimicrobial station cover barriers used to easily protect your tray, husky, arm bar or other surfaces. These sheets are silky soft and does not stick to itself which makes it easy to position. These covers are long enough that you can tie the ends together around an arm bar and avoid having to use tape. 

This product is compostable through industrial composting, home composting and will break down within a landfill. It is best to compost this material but we also understand that many people do not live in areas that have access to such facilities and it is our goal to provide the most eco-responsible options for a products end of life cycle. 

Features:

• Raw Materials (99.01%): Starch, Glycerol and PBAT | Ti02 (0.97%) | LDPE (0.02%)
• 50cm (20 inches) wide x 72cm (28 inches) long
• 16 microns thick
• 100 sheets per roll
• Perforated lines
  
• Made in Europe
• Breathable and Safe: this product is non-cytotoxic, which means it is certified as a complete biological barrier to viruses and bacteria while still maintaining breathability

Benefits:

• 100% compostable
• Soft and silky surface very well suited for direct contact with the body
  
• Skin irritations are less frequent due to this product being antimicrobial and hypoallergenic

Compostability / Biodegradability:

This material was developed as an eco-responsible substitute to plastics for the medical and beauty industries due to it's high hygienic qualities, and softness on skin. 

Industrial composting: 10 to 45 days

Home Compost: 6 to 9 months

Landfill: 9 months (depending on conditions) 

Certifications:

BPI Compostable in Industrial Facilities: Cert #891053

Hex and Torx Key Set

Includes 1 of each of the following: 

9/64 Allen Key

5/64 Allen Key

1/16" Allen Key

T20 Torx Key

T15 Torx Key

1.55 MM Allen Key

Hex L Key .5"

ELECTRUM Gold Standard Tattoo Stencil Primer is the newest innovation from the industry leader in tattoo stencil application products.  Gold Standard was developed over 3 years of testing and perfecting and is a great alternative to our original gel-based primer for artists that prefer a lotion-based primer. 

You know you can trust Electrum products by our consistent positive customer feedback and continued brand loyalty. ELECTRUM products are developed by tattoo artists for tattoo artists, and are manufactured by tattoo artists, not laboratories.

ELECTRUM Gold Standard works with skin markers too! Say goodbye to needing a lotion AND a spray for your stencils! ELECTRUM does it all in one! If you're a sharpie artist, just apply ELECTRUM like you would apply a thermal stencil, let it dry on the skin for 10 minutes and draw right on top of it... BAM, it's STUCK and you're not going to have to worry about losing that artwork! ELECTRUM is the GOLD STANDARD!!!!

• Years of solid industry feedback 100% trusted!
• Developed by veteran tattoo artists.
• Mere pennies per application!
• Super tacky formula holds all papers to the skin!
• Promotes super dark transfers!
• All inclusive, works with both thermal stencils and sharpie art.
• WORKS WITH ALL SPIRIT PAPERS - Purple, Green, and Red! 
• Keeps your stencil LOCKED onto the skin! 
• Completely Vegan and Non-Toxic.
• Skin friendly.
• Deodorant free!
• Fragrance Free!
• Made in the USA
• EU Certified and compliant

Say goodbye to lost stencils forever! 

Dan Kubin Replacement Accessory Kit includes the following:

• 1.5MM Allen Key
• 5/64" Hex Key
• Taper Pin (used to open up/ensure your needle bar loop is the correct size)
  
• Dan Kubin Universal Sidewinder Spring
• 20 Dan Kubin Perfect Nipples

Seth Ciferri's Middleweight Weiner Dog Liner 2.2!

Same geometry and size as the lightweight version, but with a beefier base and spring shelf providing more power but still keeping the weight under 6 ounces!

NOW WITH A SPRING LOADED SWING-GATE VISE

Highlights:

• CNC Machined Iron Frame 
  
• Deluxe Black Zinc Finish
  
• Swing-Gate Vise Guaranteed to Lock Tight on Any Tube
  
• Deluxe Black Seth Hardware and Workhorse Coin Thumbscrew
  
• 1" 8 Wrap Taped Coils Plus Capacitor Strap

Specifications:

• Medium Speed with a Hard Hit To push Larger Groupings
  
• Running 130-135 Hz @ 6 V Unloaded
  
• Pushing Loose 5's to 14's Easy
  
• Weighs 5.95 oz
  

Made in the USA

Blackwork Nitrile Gloves

Made from a non-latex nitrile formula, these new Blackwork medical grade exam gloves offer all of the benefits of natural rubber latex with none of the allergen problems associated with latex. Blackwork gloves were specially formulated / designed to reduce hand fatigue during long tattoo sessions. Using their patented formula, they've created a glove with almost zero resistance while maintaining comfort, elasticity, and strength. Textured finish for wet and dry gripping ability.

• 100ct. per box
• Patented Ultra Elastic Black Nitrile Formula
• Near Zero Resistance, reduced hand fatigue over long hours
• Textured surface for greater grip and tactile sensitivity
• Smaller box size reduces shipping cost
• Extreme elasticity

Their new patented Black Nitrile formula is the most scientifically advanced glove in the Tattoo Industry. Unrivaled protection, Zero resistance, Incredible comfort, and a textured surface with unbelievable tactile sensitivity. 

Clip Cord to RCA Adapter handmade in Spain by Noe Quintillan.

The most compact, lightweight, and versatile clip cord to RCA adapter available. Designed and built to be a compact adapter for use specifically on Kubin machines, but also provide a universal fit on any clip cord setup.

Adam Ciferri Pitbull Liner Kit

Includes everything needed to build a nice tattoo machine...

• CNC Cut Iron Pitbull Frame
  
• Standard Workhorse Red Oxide Finish on Frame
  
• Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
  
• Armature Bar
• Steel binding posts and Chris Smith copper contact screw 
  
• 2 Spring Sets with each kit
  
• 1.125" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
  
• Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
  
• All Screws you'll need, and some extras. 
  
• Wrenches 
  
• Washer Package including all washers needed... (steel, fiber, and shims)

Made in the USA

Deluxe Workhorse Tool Set

These are all very simple, yet effective tools used by our builders and many others. Deluxe tool set includes a Wurth Spring Punch, Wiss Snips, Deluxe Armature Bar Fixture, Alignment Tool, Hex and Torx Key Set, as well as 6 feet of 1/2" and 3/4" spring stock. All at a discounted price.

Armature Bar Fixture Specs:

• Hardened Steel Base and Top Brackets to Ensure Years of Use 
• Standard 1/2" Wide Slot for Rear Springs
• Standard 3/8" Wide Slot For Armature Bars
• 1" x 3" Overall Part Dimensions
• Insert Alignment Tool in hole to use as a stand to help hold your machine while working on it

Alignment Tool Specs:

• 5/16" x 3.5" Stainless Bar
• Knurled Grip
• Armature Bar Nipple Slot on the top for alignment use
• Armature Bar Groove inside for tweaking / turning your armature bar if necessary.... we highly recommend that only those experienced with machine building and repair use the tweak option....it is not always necessary and not always the best way to make things hit flat, just one of many options.

Wurth Premium Spring Punch:

• Punches holes for #8 screw size
• A must have for machine building and machine repair
• Made in Germany

Wiss Snips:

• 9-3/4" Metalmaster® Compound Action Snips
• Cuts straight, left, and right
• Non-slip serrated jaws cut spring stock with ease

Spring Stock:

• 6 Feet of Blue Tempered Spring Steel
• 1/2" and 3/4" wide by .018 thick

Hex and Torx Key Set includes 1 of each of the following:

• 9/64 Allen Key
• 5/64 Allen Key
• T25 Torx Key
• T20 Torx Key
• T15 Torx Key

Workhorse Large O-Rings, ideal for use on the rear of an Armature Bar to dampen the hit and remove excess chatter.

Softer than standard Buna-N O-rings for a better seal in low-pressure applications, these are also resilient and offer excellent tear resistance. They resist hydraulic oils and motor oil. These O-rings have a round profile and are suitable for a wide range of static and dynamic sealing applications.

3/8 ID, 9/16 OD. 50A Soft Durometer.

Available in 10 packs or 100 packs.

Dan Kubin V3R Sidewinder

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Black Polished Aluminum Frame with Blackened Hardware
• Featherweight Aluminum version provides the same performance weighing in a couple ounces less than the Brass version at about 3.5 ounces
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.

For more info please watch the V3R Setup and Tuning Video:

Use in place of Green Soap / Dettol to clean the tattoo area and greatly reduce redness and swelling during the tattoo process! Cleanse, Rinse, Soothe.

Electrum Cleanse is ideal for before, during and after the tattoo process. Electrum Cleanse is electrolyzed water that is produced through a proprietary, patented electrochemical process which passes an electrical current through the water, thereby generating super-oxygenated water.  This extremely potent antimicrobial solution is highly effective in cleansing, rinsing, and soothing tattooed skin.  Electrum Cleanse is like the natural Hypochlorous Acid produced by the human body which assists the immune system in fighting off infections.

Electrum Cleanse is a clear hypotonic solution topically applied to skin and wound areas. The subject device is a wound management and cleansing solution that is intended for cleansing, irrigating, and debriding dermal wounds in addition to moistening and lubricating absorbent wound dressings (e.g. gauze, bandages). The mechanical action of fluid moving across the wound provides for the mechanism of action and aids in the removal of foreign objects such as dirt, ink and debris.  

Electrum Cleanse contains the following ingredients: Ionized water (99.93%), Sodium chloride (0.048%), Hypochlorous acid (0.02%) and hypochlorite Ion (0.002%)

Benefits:

• Can be used as a cleanser, a rinse, and an aftercare solution - 1 product, multiple uses.
• Can be used to cut your black ink for grey wash (in your pigment caps).
• Contains no harsh substances. NO alcohol. NO stinging.
• Is non-toxic, non-irritating and non-allergenic.
• Is pH neutral & leaves skin residue-free.
• Helps to reduce swelling and redness, so the artist gets a more true visual aspect while tattooing.
• Can be used throughout the tattoo process, and as an aftercare, which allows for better color saturation and pigment retention.
• Can be applied to healthy skin, even around the: eyes, ears, mouth & nose.
• Is compatible with other commonly used tattooing products.
• Reduces client discomfort and irritation while being tattooed.
• Is FDA cleared.
• Is biodegradable, and environmentally safe. It does not require any special handling, or disposal.
• Technology that has been proven on over 100,000 tattoos by thousands of tattoo professionals during the last 5 years.

How to Properly Use Electrum Cleanse (PREP):

• Clean the skin using approved antiseptic prep.
• After Prep, evenly apply Electrum Cleanse onto a clean, disposable, lint-free paper towel or wipe. DO NOT DILUTE!
• The amount of Electrum Cleanse used is directly related with the size of the are being cleaned & rinsed.  There is no "over-application" of the product.
• Apply Electrum Cleanse onto the skin in one consistent outward circular motion, beginning in the center of the area being cleaned & ending at least 2 inches further out from the area that will be tattooed.  Try not to overlap areas while cleaning.
• Shave client using cleanser of choice.  Using a single-use disposable razor, begin shaving from the top of the area to be tattooed to the bottom.
• Dispose of the razor directly into a regulated sharps container immediately upon completion of shaving.
• Evenly apply Electrum Cleanse onto a clean, disposable, lint-free paper towel or wipe. DO NOT DILUTE!
• Allow Electrum Cleanse to sit on the skin for 15 seconds undisturbed.  Set the soaked towel on top of the skin (area).

How to Properly Use Electrum Cleanse (PROCEDURE):

• DO NOT DILUTE! Dilution will make the product ineffective!
• DO NOT USE WITH GREEN SOAP! Green Soap will neutralize the product!
• Electrum Cleanse can be used in lieu of distilled water throughout the tattoo procedure.
• You may add a drop of Dial liquid soap if desired for increased cleansing action of plasma and residual ink.
• Noticeably less redness/irritation to the skin throughout the procedure.
• Reduces the "sting" associated with tattooing.
• Less irritation = clients sit better, making artists work easier.

Avoid overexposure to sunlight and heat.  Store at room temperature. Do not allow product to freeze.

SDS Available Here