¡Herramientas de cobre de Aaron Cain ya disponibles!

Basados ​​en las herramientas de cobre talladas a mano de Aaron, trabajamos con Aaron en el diseño de una versión que pudiéramos cortar y fresar CNC para agregarles un poco de forma y profundidad adicionales, al mismo tiempo que las manteníamos asequibles. Estas herramientas fueron mucho trabajo, pero un proyecto divertido y muy útil para llevar a diario. Funcionan muy bien como abridor de botellas, abridor de puertas, pulsador de botones, mecanismo de defensa o cualquier otro propósito creativo. El cobre es naturalmente antimicrobiano, lo que lo convierte en un excelente material para aislarse de las superficies de alto contacto que pueden contener microbios dañinos y enfermedades.

Especificaciones:

• Corte de cobre de 1/4"
• Fresado, biselado, lijado, pulido, estampado y ligeramente pulido
• Dimensión total de 2.5" x 5"
• Oblongo 1.25" x 1.125" Orificio para el dedo
• Carrera limitada
• Hecho en los EE. UU.

**El uso de una superficie de aleación de cobre es un complemento y no un sustituto de las prácticas estándar de control de infecciones; los usuarios deben seguir todas las prácticas actuales de control de infecciones, incluidas las prácticas relacionadas con la limpieza y desinfección de superficies ambientales. Se ha demostrado que el material de la superficie de aleación de cobre reduce la contaminación microbiana, pero no evita necesariamente la contaminación cruzada.

Special Limited Edition Biomech Dan Kubin V3R Sidewinder carved by Aaron Cain!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original hit and performance of the V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

Machine Specs:

• Custom Aaron Cain Hand Carved Bio-Mech Brass Frame, Armature, and Motor Cover with custom patina finish (carving varies a little on each machine)
  
• Limited Edition of 10 
• Cain Chopped Coin Thumbscrew, new Brass Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6) (timing marks on these are a little harder to see with the carving)
  

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website.

December is an expensive month, as a thanks for your continued business and support all items in this category are 20% OFF the lowest listed price!

20% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Order by 12 pm Noon December 20th with Next Day Air shipping method to receive by Christmas!

New Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard Cain geometry set up to run quick and zippy for small to medium sized groupings.

Machine Specs:

• CNC Mill Carved Iron Frames
• Limited Rubbed Bronze Plated Finish
• Deluxe Workhorse Blackened Steel Hardware
• 1.125" 10 Wrap Custom Money Single Coil Plus Shadow Coil
  
• Quick with a Medium Stroke and Solid Medium Hit
• Running 145-150 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 Ounces
• MADE IN THE USA

New Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard Cain geometry set up to run quick and zippy for small to medium sized groupings.

Machine Specs:

• CNC Mill Carved Iron Frames
• Limited HD Gloss Plateau Green Finish
• Deluxe Workhorse Blackened Steel Hardware
• 1.125" 10 Wrap Custom Purple Money Single Coil Plus Shadow Coil
  
• Quick with a Medium Stroke and Solid Medium Hit
• Running 145-150 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 Ounces
• MADE IN THE USA