Black Friday x Black November SOBA Bolo Liner/Shader Combo Kit! Special edition run of machine kits at special pricing!

This machine kit comes with parts to build as either a liner or a shader. Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Ductile Iron Frame 
  
• Drilled Out and Lightened Upright 
  
• Swing Gate Vise with and Internal Spring for ease of use
  
• Custom Bead Blast Raw Frame Ready for Any Finish
• Custom Deluxe Blackened Hardware
• 1" 8 Wrap Custom SOLDERED Coils
• Liner and Shader Armature Bar
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)

Typical LINER Specifications:

• Medium Speed with a Solid Hit
• Great for Smaller to Medium Sized Groupings
  
• Pushing 3's to 9's easy, turn up a little for 11's
  
• Running 140-145 Hz @ 6.5 V Unloaded
  
• Weighs 6.8 oz

Typical SHADER Specifications:

• Medium Speed with a Solid Hit 
  
• Great for Quick Color Packing, turn down and it back off nice for Blends / B&G
  
• Pushing 5's to 11's easy, turn up a little for 13's
  
• Running 110-115 Hz @ 6.5 V Unloaded
  
• Weighs 6.8 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Black Friday x Black November Mike Pike PMA Direct Drive Rotary! Special edition run of machines at special pricing!

Limited Edition Raspberry x Gold

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guaranteed to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time. 

Highlights:

• Limited Edition Run of Transparent Raspberry Powder Coat. 24k Gold Plated Motor Cap, Swing Gate Vise, and Hardware
• High-grade Aluminum body precision milled frames and components
• Powered by a top of the line Maxon motor described by Mike Pike to be "the best motor [he has] ever used in a rotary"
• Clip cord connection
• Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
• Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy

Specifications:

• Pushes up to 25 mag and up to 18 Rounds no problem
• Great with needle on bar or cartridges
• Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
• Lightweight at a mere 4.5 oz

Made in the USA

Kit de forro de Chris Smith Hater de lujo limitado

El kit incluye todas las piezas necesarias para construir una gran máquina de tatuar... pero no incluye las habilidades para construir una gran máquina de tatuar, lo siento, no lo siento :)

• Marco Carnivore de aluminio cortado con CNC
• acabado crudo
• Herrajes ennegrecidos de lujo
• Bobinas soldadas personalizadas de 1 "y 8 envolturas
• Yugo con incrustaciones de 1/8"
• 2 opciones de barra de armazón de revestimiento
• 4 juegos de resortes con cada kit
  
• Todos los tornillos que necesitará MÁS las llaves necesarias (aunque necesitará un destornillador de cabeza plana)
  
• Paquete de arandelas que incluye todas las arandelas necesarias (acero, fibra y calzas)
• Herramienta de alineación incluida (accesorio de armadura opcional*)
  
• pesa 5.6 onzas

Especificaciones típicas del forro:

• Empuja 5's a 11's Easy
• Carrera larga, velocidad media con un golpe pesado
  
• 130-135 Hz a 6,5 ​​V sin carga

*Viene con o sin nuestro accesorio de barra de armadura. Recomendamos elegir uno si no tiene uno, es, con mucho, la mejor manera de ensamblar su barra de armadura y resortes con la alineación y el apriete adecuados.

Hecho en los EE. UU.

¡Nuevo Destroy Troy Franklin Liner limitado!

Después de años de discutir, desmenuzar y trabajar en este proyecto; ¡Destroy Troy ha resucitado la máquina de tatuar Franklin de Marv Lerning y la ha hecho suya! Algunos ajustes de marco serios que alteran el tornillo de banco y mueven el peso hacia adelante sobre la mano, múltiples ajustes y actualizaciones, ahora están marcados y listos. Con un funcionamiento muy suave, extremadamente bien equilibrado y resistente, estas máquinas con peso hacia adelante están finamente ajustadas y construidas para años de uso sin problemas.

Reflejos:

• Marco de hierro mecanizado de precisión.
  
• Vise de gran tamaño diseñado para mantener más peso sobre su mano para ayudar a equilibrar el tirón de su clipcord y reducir la fatiga de la mano
• ¡Vise altamente versátil que se puede usar con una configuración para zurdos o diestros!
• Cray Bar Destroy Troy Warp Drive chapado en oro de 24 quilates
  
• Bobinas hechas a mano personalizadas, 9 vueltas delanteras y 7 vueltas traseras
  
• Recubrimiento en polvo blanco personalizado Palleon Panther
  
• Hardware de lujo chapado en oro de 24k más contacto de plata pura
  
• Resortes especiales de acero inoxidable que no se corroen
  

Especificaciones:

• Velocidad media con un golpe sólido
• Funcionando alrededor de 130-135 Hz Descargado a 6.5V
• Excelente para usar con 5s a 11s, suba durante 14s
• Máquina ponderada hacia adelante de 7.5 oz
• Hecho en los EE. UU.

Joshua Bowers SC Bobber in 24k Gold

Bowers Bobbers now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with 24k Gold Plated Finish
  
• Blackened Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.
Joshua Bowers Micro Liner Care Instructions

Joshua Bowers Rubber Band Placement Diagram

NUEVO Seth Ciferri Mini-Flatside Liner

- Marco de revestimiento Mini-Flatside de ALUMINIO cortado con CNC
- Acabado con recubrimiento en polvo rosa desgastado
- Herrajes ennegrecidos de lujo
- Tornillo de banco de guillotina orientado hacia adelante, ideal para uso con la mano derecha o izquierda
- Bobinas personalizadas de 1" y 8 vueltas
- Velocidad media/lenta con un golpe fuerte
- Funcionamiento de 125 a 130 Hz a 6 V sin carga para líneas pesadas estables de un solo paso
- Empujando 5's a 11's Easy, suba durante 14 segundos dependiendo de cómo tatúe
- Con un peso de 5,3 onzas
- FABRICADO EN EE. UU.

New V4 Adam Ciferri Ghost Dog Shader!

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.

Highlights:

• CNC Cut Iron with the highest precision and care
• 1" Keg Coil
• Custom Gloss Black Powder Coat Finish
• Deluxe Workhorse Blackened Hardware

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium/Quick Speed with a Solid hit that easily pushes 5's to 13's...also able to push very large groupings if you bump the volts up a bit
  
• Runs 110-115 Hz @ 6.5 Volts Unloaded
• Weighs 6 oz

Made in the USA

Mike Pike Smith & Howard Liner!

Limited Edition Pink x Black colorway

Milled with updated Mike Pike geometry in the shape of what is traditionally referred to as a "Blackie Frame" for it's association with the tattoo artist Brooklyn Blackie. Many are under the presumption he was the originator of this design, but this frame shape was originally made by Smith & Howard Tattoo Supply in the early 1900s. 

Highlights:

• Mini Pike S&H Frame CNC Cut from Iron Bars
• HD Powder Coat Pink x Black Faded Finish
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in the way
• Deluxe Workhorse Blackened Hardware
• Long Fluted Armature Speed Bar
• Blackened Steel binding posts
• 1" 8 Wrap Custom Coils

Specifications:

• Medium Speed with a Long Stroke and Solid Hit
• Running 130-135 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 11s
• Weighs 6.4 oz

Made in the USA

CRITICAL CONNECT V3 BATTERY

Upgrade your experience with the Critical Connect V3 Battery. Enhanced with a 1.5” Color Display Screen and a larger 2000 mAH battery, enjoy extended duration and convenient session/run time mode.

With magnetic connection, the V3 Battery seamlessly connects directly to the Critical Torque Machine and the Bishop Power Wand. This versatile battery also includes an RCA converter, allowing for universal compatibility with any RCA machine.

FEATURES:

• Longest running battery on the market with increased battery life
• Larger, intuitive 1.5" color display
• Controls for: voltage, jumpstart ON/OFF, hourly rate tracker, Run / Session timers, presets, bluetooth (Critical Connect) for FS compatibility, and ability to modify settings.
• 5 tactical buttons for easy navigation
• Universal Compatibility with your favorite machines using the RCA Converter

SPECIFICATIONS:

• Battery weight: 2.1 oz
• Longest Running Battery in the Market (dependent on machine setup/voltage)
• Manual/Instructions – QR code provided in with packaging
• Includes: 1 x V3 Battery and 1 x RCA Converter
• CLICK HERE to download manual

Cory Rogers Zephyr Shader Machine Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Zephyr Frame
• Blackened Finish
• Deluxe Blackened Hardware
• 1.25" 8 Wrap Custom Soldered Coils
• Shader Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a flat head screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specs:

• Slow Speed with a Hard Hit and Long Stroke
  
• Great Shader for Traditional Work
• 100-105 Hz. @ 6.5 V unloaded
• Pushes 5s to 15s Easy
• Weighs 6.75 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Aaron Cain Octeto Liner y Shader! El estilo clásico de Aaron Cain combinado con su construcción y afinación de precisión da como resultado una versión básica de Workhorse de sus famosas costumbres y máquinas talladas.

- Mini marcos de hierro cortado CNC
- Acabado de óxido rojo de caballo de batalla duradero
- Hardware de acero ennegrecido de caballo de batalla estándar
- Bobinas termorretráctiles negras de 1" y 8 vueltas
- Rápido con un golpe medio y un golpe medio sólido
- Funcionamiento 150-155 Hz a 6,5 ​​V sin carga
- Empujando de 3 a 9 con facilidad
- Pesa 6.45 onzas
- FABRICADO EN EE. UU.

Mike Pike x Destroy Troy Jonesy Transatlántico

¡Estas son las segundas máquinas colaborativas especiales de edición limitada de Mike Pike y Destroy Troy! Esto ha estado en proceso durante bastante tiempo, originalmente Jonesy iba a ser su primera máquina colaborativa, pero Teacups intervino primero mientras marcábamos estas máquinas Jonesy. Ahora, después de muchos ajustes, retoques y actualizaciones de marcos, han evolucionado y mejorado, y no podríamos estar más contentos con el resultado. Con un funcionamiento muy suave, extremadamente bien equilibrado y resistente, estas máquinas con peso hacia adelante están finamente ajustadas y construidas para años de uso sin problemas.

Reflejos:

• Base Jonesy modificada de aluminio negro con varias actualizaciones para ayudar con la resistencia general a largo plazo y la reducción de vibraciones
• Tornillo de banco de acero supergrueso negro diseñado para mantener más peso sobre su mano para ayudar a equilibrar el tirón de su clipcord y reducir la fatiga de la mano
• Barra Cray Troy Warp Drive chapada en oro de 24 quilates y herrajes de lujo
  
• Bobinas de escala de pescado a juego de 8 envolturas personalizadas
  
• Baby Blue HD Recubrimiento en polvo Latón Jonesy Vertical
  

Especificaciones:

• Velocidad media con un golpe sólido
• Funcionamiento 140-145 Hz Descargado a 6V
• Excelente para usar con 3s a 9s, suba durante 11s
• Máquina ponderada hacia adelante de 7.5 oz
• Hecho en los EE. UU.