Seth Ciferri Lightweight Weiner Dog Shader Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron LW Weiner Dog Frame
• Lightweight V2.1 Wiener Dog weighs in at a mere 5.5oz fully built
• Gloss Black Powder Coat Finish
• Deluxe Blackened Hardware
  
• 1" 8 Wrap Soldered Coils
• Long Shader Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a phillips screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Shader Specs:

• Medium Speed with a Hard Hit 
  
• Great For Color Packing and Whip Shading
  
• Running 100-105 Hz @ 6 V Unloaded
  
• Pushing 7's-13's All Day

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Dan Kubin V3/23 Sidewinder with RCA!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

RCA Specifications:

• RCA version is wired for the harder hit mode only using RCA connection. If using a clip cord on this version, they are wired opposite of the standard clip cord version, use Positive side DOWN for hard hit, Positive up for a more muted hit.
• This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
• This will also work good with a right-angle RCA cord.
• Clip Cord option still works, it is just wired backwards.
• The position of the battery makes the machine’s balance point much more forward, like a pen.

Machine Specs:

• Distressed HD Red Powder Coated Aluminum Frame with 24k Gold Plated Hardware
  
• Featherweight Aluminum version provides the same performance weighing in a couple ounces less than the Brass version at about 3.5 ounces
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website

Limited Seth Ciferri Gun Metal Grey Modern Classic Liner

Después de muchos años, Seth le ha dado a su Classic Liner y Shader algunas actualizaciones importantes, reelaborando todo el marco y la geometría para crear este Modern Classic. Con curvas esculpidas, varias sustracciones y adiciones, estos marcos de aluminio están bien hechos para que no haya vibraciones ni vibraciones adicionales. Dejando al usuario con una máquina altamente funcional, liviana y balanceada hacia adelante, fácil en la muñeca y atractiva para los ojos. Un caballo de batalla completo con un toque moderno.

Especificaciones técnicas:

• Marco ligero de aluminio cortado con CNC
• Acabado anodizado gris metalizado altamente duradero y resistente a la oxidación
• Herrajes de acero negro de lujo, que incluyen una carpeta frontal de ajuste por presión y una carpeta trasera de acero con incrustaciones para una mejor conexión
• Prensa de guillotina lateral, ideal para usar con tubos desechables y de acero
• Yugo de bobina de hierro de 1/4" con incrustaciones para un mejor rendimiento y menos vibración
• Bobinas de billete de $ 22 de tapa en T chapada en oro de 1 "y 8 envolturas
• Velocidad media rápida con un golpe sólido
• Funcionamiento 140-145 Hz a 6 V sin carga
• Empujar de 3 a 11 No hay problema
• ¡Con un peso de tan solo 5,5 onzas!
• Como siempre, HECHO EN EE. UU.

Aquí hay algunas palabras de Seth sobre la evolución de su "Clásico":

Dan Kubin X Adam Ciferri Ghost Dog Revival V2!

Updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, PLUS an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

Highlights:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
  
• CNC Cut Iron with the highest precision and care
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• HD Pink Powder Coat Finish
• 24k Gold Plated Deluxe DK Hardware and Blackened Specialty Spring

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to easily push 3 to 18 Rounds and up to 49 mag 
  
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 8-10 Volts for large groupings
• Weighs 6 oz
  

Machine Setup:

• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Made in the USA

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard Cain geometry set up to wrong quick and zippy for small to medium sized groupings.

Highlights:

• CNC Mill Carved Iron Frames
• Limited HD High Gloss Metallic Gray Finish
• Deluxe Workhorse Blackened Steel Hardware
• 1.125" 10 Wrap Custom Purple Money Single Coil Plus Shadow Coil
  

Specifications:

• Quick with a Medium Stroke and Solid Medium Hit
• Running 145-150 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 oz
  

Made in the USA

Eddy Deutsche Blade Runner Liner!

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• Nickel Plated Long Nipple A Bar
  
• Custom Distressed and Clear Coated HD Red Powder Coat
  
• Deluxe Nickel Plated Hardware plus pure Silver Contact
• Custom Hand Wound 8 Wrap Coils

Specifications:

• Medium Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running around 130-135 Hz Unloaded at 6.5V
• Great for single pass quick and solid lines with 5s to 11s, turn up for 14s
  
• Weighs about 7 oz

Made in the USA

Dan Kubin X Adam Ciferri Ghost Dog Revival V2!

Updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, PLUS an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

Highlights:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• CNC Cut Iron with the highest precision and care for superior conductivity
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Custom 24k Gold Plated Finish
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Deluxe DK 24k Gold Plated Hardware
  

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to push 3's to 14's no problem
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
• Weighs 6 oz

Machine Setup:

• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Made in the USA

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Limited Edition Bowers SC Bobber in Toasted Caramel

Now with a Swing Gate Vise that works great with all tubes!

Highlights:

• Precision Machined Aluminum Body with Custom Powder Coat Finish
  
• Blackened Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord
  

Specifications:

• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use
• Weighs 4 oz

Made in the USA

A few words from Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.
Joshua Bowers Micro Liner Care Instructions

Joshua Bowers Rubber Band Placement Diagram

Limited Mike Pike Smith & Howard Liner!

Special Edition Brushed Nickle x Black Finish

Milled with updated Mike Pike geometry in the shape of what is traditionally referred to as a 'Blackie frame' for it's association with the tattoo artist Brooklyn Blackie. Many are under the presumption he was the originator of this design, but this frame shape was originally made by Smith & Howard Tattoo Supply in the early 1900s. 

Highlights:

• Mini Pike S&H Frame CNC Cut from iron bars
• Brushed Nickel x Black Finish
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in the way
  
• Long Fluted Armature Speed Bar
• Blackened Steel binding posts
  
• Deluxe Workhorse Blackened Hardware
• 1" 8 Wrap Workhorse Coils

Specifications:

• Medium Speed with a Long Stroke and Solid Hit
• Running 130-135 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 11s
• Weighs 6.4 oz

Made in the USA