"¡Ahora, con un tornillo de impacto ponderado actualizado! Descubrí que ayuda con la estabilidad del golpe y mejoró el rendimiento general. Además, tenga en cuenta que la posición de la banda elástica es otro elemento de ajuste simple. Para operaciones de menor voltaje o golpe más fuerte, la posición la banda apuntando ligeramente hacia arriba. Esto reducirá la tensión del resorte de retorno, lo que hará que opere mejor a velocidades más lentas y disminuya la cantidad de elasticidad. La bonificación es menos tensión en la banda de goma.
Las actualizaciones anteriores del V3R incluyen agregar el codiciado tornillo de mariposa DK, mover el tornillo de impacto (el elemento de ajuste más crucial e incomprendido) al extremo frontal de la barra de armadura y agregar un pasador de impacto de acero endurecido para que la máquina sea más fácil de reiniciar, y mantendrá su tono mucho más tiempo. También usé algunos trucos del V7 para reducir las salpicaduras y hacer que golpee un poco más rígido en el extremo inferior y también agregué los resortes de respaldo para evitar la rotura del resorte.
Estas actualizaciones se suman a la versión actualizada de 2019, que aún tiene la misma geometría confiable y probada que la v3 original, pero ahora revisada y remasterizada con diferencias sutiles para mejorar el rendimiento general. Este es el Sidewinder más fácil de usar hasta ahora. Las diferencias, además de la estética, son la rueda de carrera numerada, una marca de sincronización del tornillo de impacto en la leva y el marco (como el v5-6). Además, hice una nueva configuración de bloqueo de tornillo de banco con resorte que sujeta el tubo sin esfuerzo. La rueda de carrera está indexada en 10 posiciones y numerada en consecuencia".
Gracias por mirar - Dan.
Especificaciones de la máquina:
Marco de latón de óxido negro con herrajes negros (*El acabado puede variar)
Tornillo de mariposa DK, nueva barra de armadura y rueda de carrera actualizada para mejorar el rendimiento
El renombrado forro rotativo. Hunde sin esfuerzo líneas de cualquier tamaño con solo rozar la piel.
El motor es el mismo que el Sidewinder V2-V4, que ha probado la prueba del tiempo. Ha sido uno de los favoritos de los coleccionistas de Sidewinder desde hace mucho tiempo.
Vice-Lock que se aprieta fácilmente en casi cualquier tubo
Ideal para todas las variedades de Line Work o como Fast Shader/Packer
Marca de sincronización en la leva y el marco para ajustar el tornillo de impacto. (Al igual que el V5 y V6)
Dial de trazo numerado para que puedas jugar fácilmente con el trazo sin temor a perder ese punto óptimo. No puedes hacerlo demasiado largo o demasiado corto
Configuración de la máquina:
Aguja estándar en la barra: envuelva una banda elástica gruesa alrededor de la tapa del motor y en la parte delantera de la máquina para aumentar la tensión de la barra de agujas. Se recomienda utilizar bandas elásticas gruesas y pezones perfectos de Dan.
Cartuchos: envuelva una banda elástica alrededor de la tapa del motor y sobre la parte superior de la barra de la armadura para contrarrestar la tensión hacia arriba del cartucho. Tanto las bandas de goma gruesas como las estándar funcionan, solo dependerá de la tensión de la membrana o la banda del cartucho para determinar si la banda de goma proporciona la contrarresistencia adecuada.
*Totalmente oxidado en negro. *Tenga en cuenta que el latón alcanzará su punto máximo con el tiempo donde se ve muy desgastado, lo que se suma a su carácter.
Para obtener más información, mire el video de configuración y ajuste de V3R:
Limited SOBA V2 Mini Clipper Liner - Emerald Green Sparkle
Precio habitual$425.00 USD
New SOBA V2 Mini Clipper Liner!
New forward weighted version of the Mini Clipper designed and built by SOBA. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.
- CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity - Anodized Satin Olive Green Finish - Heavy Weight Brass Vise and Thumbscrew with Emerald Green Sparkle Powder Coated Finish - Deluxe Brass Hardware plus Custom Blackened Steel Drop Down Rear Binder - 1" 8 Wrap Custom Matching Coils - Great for Medium to Large Groupings - Medium Speed with a Hard Hit - Pushing 5's to 14's All Day - Running 130-135 Hz @ 6.5 V Unloaded - Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew - MADE IN THE USA
Workhorse Irons
Limited Adam Ciferri V3 Ghost Dog Liner -Nickel x Nickel
Precio habitual$450.00 USD
Limited Adam Ciferri V3 Ghost Dog Liner - Nickel x Nickel
Tuned for all-day, every-day street shop and/or custom tattooing
Medium speed with enough hit to push 3's to 14's no problem
Runs 125-130 Hz @ 6.5 Volts Unloaded, crank up to 8-9 Volts for large groupings
CNC Cut Iron with the highest precision and care
1" Custom Reflective Keg Coil
Polished Nickel Plated Frame
Deluxe Blackened Binders with Nickel Plated A-bar and Thumbscrew
Weighs 6 oz
MADE IN THE USA
A few words from Adam about this machine: "The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine" -Respectfully, Adam C.
"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder. Hard hitting, effortless, and zippy. -Intended for experienced artists who don’t want to mess around.
The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity.
We stripped it down a little more, and added in the extra performance. The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.
The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."
Thanks for looking - Dan.
Machine Specs:
HD Pink Powder Coated Brass Frame with 24k Gold Plated Hardware and Motor Cover
DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
The renowned rotary liner. Effortlessly sink any size line by just grazing the skin.
The motor is the same as the V2-V4 and V7 Sidewinder, which has proven the test of time. It has been a favorite of the long time Sidewinder collectors.
Vice-Lock that easily tightens on nearly any tube
Great for all varieties of Line Work or as a Fast Shader/Packer
Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)
Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot. You can’t make it too long or too short
Machine Setup:
Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website.
"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder. Hard hitting, effortless, and zippy. -Intended for experienced artists who don’t want to mess around.
The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity.
We stripped it down a little more, and added in the extra performance. The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.
The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."
Thanks for looking - Dan.
RCA Specifications:
RCA version is wired for the harder hit mode only using RCA connection. If using a clip cord on this version, they are wired opposite of the standard clip cord version, use Positive side DOWN for hard hit, Positive up for a more muted hit.
This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
This will also work good with a right-angle RCA cord.
Clip Cord option still works, it is just wired backwards.
The position of the battery makes the machine’s balance point much more forward, like a pen.
Machine Specs:
HD Pink Powder Coated Brass Frame with 24k Gold Plated Hardware
DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
The renowned rotary liner. Effortlessly sink any size line by just grazing the skin.
The motor is the same as the V2-V4 and V7 Sidewinder, which has proven the test of time. It has been a favorite of the long time Sidewinder collectors.
Vice-Lock that easily tightens on nearly any tube
Great for all varieties of Line Work or as a Fast Shader/Packer
Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)
Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot. You can’t make it too long or too short
Machine Setup:
Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website
Nowwith a Swing Gate Vise that works great with all tubes!
A Few Words From Joshua about this machine: This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.
Specs:
Precision Machined Aluminum Body with Custom Powder Coat Finish
Blackened Steel Swing Gate Vise that works great with all tubes!
Deluxe Brass Hardware
Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord