• Energía limpia y consistente
• Lecturas de voltios, hercios, trabajo y amperios
• Opción de encendido constante (simplemente presione el botón plateado en el logotipo)
• Interruptor de encendido/apagado en el lateral.
• Enchufes hembra resistentes para sujetar de forma segura los cables CC y de interruptor de pie en su lugar.
• Funcionará con todas las máquinas rotativas y de bobina.
• Salida de 2 a 16 voltios con Power Burst en el arranque
• Enchufe eléctrico de EE. UU. de 110 V o enchufe eléctrico de 220 V de la UE
• Viene con 3 potentes imanes de un cuarto de tamaño, pies y soporte opcional
• Con un peso de 1 libra
• Acabado de pintura en polvo verde oliva Workhorse
• Cuerpo de aluminio de 4,25" x 3,6" x 1,35"
• La garantía de 1 año cubre cualquier defecto de fabricación que provoque fallas en el producto. La garantía no cubre abuso o daños excesivos, pero si decide arrojarlo contra la pared del taller y luego golpearlo con un martillo, intentaremos ayudarlo a reparar el suministro por usted.

Opciones de montaje:

• Soporte de escritorio: utilice el adhesivo de 3 m incluido para colocar los imanes incluidos en la parte posterior de la fuente de alimentación y, a continuación, fije el suministro al soporte.
• Montaje lateral: use el adhesivo de 3 m incluido para unir los imanes en una fila en el lado derecho de la fuente de alimentación, luego el suministro de imanes al costado, al carro o al baúl de herramientas
• Montaje plano: use los pies incluidos y colóquelos en la parte inferior de la fuente de alimentación o el adhesivo de 3 m incluido para colocar los imanes en la parte inferior de la fuente de alimentación

¡El forro de perro Weiner de peso mediano de Seth Ciferri 2.2! ¡Misma geometría y tamaño que la versión liviana, pero con una base más robusta y un estante de resorte que proporciona más potencia pero mantiene el peso por debajo de las 6 onzas!

**AHORA CON UN TORNILLO DE PUERTA ABATIBLE CON CARGA DE RESORTE

- Marco de hierro mecanizado CNC
- Acabado de zinc negro de lujo.
- Tornillo de banco de compuerta batiente garantizado para bloquear firmemente en cualquier tubo
- Herrajes Deluxe Black Seth y tornillo de mano para monedas Workhorse
- Bobinas selladas de 1" y 8 vueltas más correa de condensador
- Velocidad media con un golpe duro para empujar agrupaciones más grandes
- Funcionamiento 130-135 Hz a 6 V sin carga
- Empujando Loose 5's a 14's Easy
- Con un peso de tan solo 5,95 oz.
- FABRICADO EN EE. UU.

Kit de forro de Chris Smith Hater de lujo limitado

El kit incluye todas las piezas necesarias para construir una gran máquina de tatuar... pero no incluye las habilidades para construir una gran máquina de tatuar, lo siento, no lo siento :)

• Marco Carnivore de aluminio cortado con CNC
• acabado crudo
• Herrajes ennegrecidos de lujo
• Bobinas soldadas personalizadas de 1 "y 8 envolturas
• Yugo con incrustaciones de 1/8"
• 2 opciones de barra de armazón de revestimiento
• 4 juegos de resortes con cada kit
  
• Todos los tornillos que necesitará MÁS las llaves necesarias (aunque necesitará un destornillador de cabeza plana)
  
• Paquete de arandelas que incluye todas las arandelas necesarias (acero, fibra y calzas)
• Herramienta de alineación incluida (accesorio de armadura opcional*)
  
• pesa 5.6 onzas

Especificaciones típicas del forro:

• Empuja 5's a 11's Easy
• Carrera larga, velocidad media con un golpe pesado
  
• 130-135 Hz a 6,5 ​​V sin carga

*Viene con o sin nuestro accesorio de barra de armadura. Recomendamos elegir uno si no tiene uno, es, con mucho, la mejor manera de ensamblar su barra de armadura y resortes con la alineación y el apriete adecuados.

Hecho en los EE. UU.

Kit de forro de Chris Smith Hater de lujo limitado

El kit incluye todas las piezas necesarias para construir una gran máquina de tatuar... pero no incluye las habilidades para construir una gran máquina de tatuar, lo siento, no lo siento :)

• Marco Carnivore de aluminio cortado con CNC
• acabado crudo
• Herrajes ennegrecidos de lujo
• Bobinas soldadas personalizadas de 1 "y 8 envolturas
• Yugo con incrustaciones de 1/8"
• 2 opciones de barra de armazón de revestimiento
• 4 juegos de resortes con cada kit
  
• Todos los tornillos que necesitará MÁS las llaves necesarias (aunque necesitará un destornillador de cabeza plana)
  
• Paquete de arandelas que incluye todas las arandelas necesarias (acero, fibra y calzas)
• Herramienta de alineación incluida (accesorio de armadura opcional*)
  
• pesa 5.6 onzas

Especificaciones típicas del forro:

• Empuja 5's a 11's Easy
• Carrera larga, velocidad media con un golpe pesado
  
• 130-135 Hz a 6,5 ​​V sin carga

*Viene con o sin nuestro accesorio de barra de armadura. Recomendamos elegir uno si no tiene uno, es, con mucho, la mejor manera de ensamblar su barra de armadura y resortes con la alineación y el apriete adecuados.

Hecho en los EE. UU.

Workhorse Model 6 Shader

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Shader inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• Full Size Frame milled in house from a solid block of Ductile Iron
• Plateau Green x Pink Powder Coat Finish
• Deluxe Workhorse Hardware with Black Oxide Finish
• Swing Gate Steel Vise
• Custom 8 Wrap 1.25" Coils
  
• High End Specialty Steel Springs
• Solid Copper Contact with Allen Key Insert
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 15s
  
• Medium Speed, running around 105-110 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

Workhorse Model 6 Liner

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• Full Size Frame milled in house from a solid block of Ductile Iron
• Plateau Green x Pink Powder Coat Finish
• Deluxe Workhorse Hardware with Black Oxide Finish
• Swing Gate Steel Vise
• Custom 6 Wrap 1.25" Coils
• High End Specialty Steel Springs
• Solid Copper Contact with Allen Key Insert
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 14s
  
• Medium Speed, running around 135-140 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

Mike Pike PMA Direct Drive Rotary!

Limited Edition Illusion Pink x Black x Gold colorway

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running rotary. 

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guaranteed to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time. 

Highlights:

• Limited Edition Run of Illusion Pink Powder Coat with Gold Disco Clear Gold and Heavy HD Black Bodies. PLUS 24k Gold Plated Motor Cap, Swing Gate Vise, and Nickel Plated Hardware.
• High-grade Aluminum body precision milled frames and components
• Powered by a top of the line Maxon motor described by Mike Pike to be "the best motor [he has] ever used in a rotary"
• Clip cord connection
• Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
• Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy

Specifications:

• Pushes up to 25 mag and up to 18 Rounds no problem
• Great with needle on bar or cartridges
• Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
• Lightweight at a mere 4.5 oz

Made in the USA

Dan Kubin V3/23 Sidewinder!

"The V3/23 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

The 23 model is more reminiscent of the original V3r from 2019, but with some enhancements in the tuning longevity. 

We stripped it down a little more, and added in the extra performance.
The stroke wheel has been simplified with having 3 timing marks instead of numbers. The marks are of different lengths, with the longest mark signifying the longer stroke range, a middle mark that is the default setting, and a short mark to signify the shorter stroke range.

The sound of the machine has been enhanced in comparison to the 2nd and 3rd variation V3r. Plus the machine now sits a little lower, providing more ergonomics."

Thanks for looking - Dan.

Machine Specs:

• Eddie Bauer Green Powder Coated Brass Frame with 24k Gold Plated Hardware + Black Hardware
  
• DK Thumbscrew, V3/23 Heavyweight Armature Bar, and updated Stroke Wheel for improved performance + V3/24 Needle Bar Tensioner Added!
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website

 New V2 GDR Limited Edition Run with Wild Style Powder Coat Finish!

This is the new updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, PLUS an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

Highlights:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• CNC Cut Iron with the highest precision and care
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• HD Seafoam x Ugly Green x Olive Green Powder Coat Finish
• Deluxe DK Blackened Hardware and Specialty Spring

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to easily push 3 to 18 Rounds and up to 49 mag 
  
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 8-10 Volts for large groupings
• Weighs 6 oz
  

Machine Setup:

• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Made in the USA

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

¡Nuevo Destroy Troy Franklin Liner limitado!

Después de años de discutir, desmenuzar y trabajar en este proyecto; ¡Destroy Troy ha resucitado la máquina de tatuar Franklin de Marv Lerning y la ha hecho suya! Algunos ajustes de marco serios que alteran el tornillo de banco y mueven el peso hacia adelante sobre la mano, múltiples ajustes y actualizaciones, ahora están marcados y listos. Con un funcionamiento muy suave, extremadamente bien equilibrado y resistente, estas máquinas con peso hacia adelante están finamente ajustadas y construidas para años de uso sin problemas.

Reflejos:

• Marco de hierro mecanizado de precisión.
  
• Vise de gran tamaño diseñado para mantener más peso sobre su mano para ayudar a equilibrar el tirón de su clipcord y reducir la fatiga de la mano
• ¡Vise altamente versátil que se puede usar con una configuración para zurdos o diestros!
• Cray Bar Destroy Troy Warp Drive chapado en oro de 24 quilates
  
• Bobinas hechas a mano personalizadas, 9 vueltas delanteras y 7 vueltas traseras
  
• Recubrimiento en polvo blanco personalizado Palleon Panther
  
• Hardware de lujo chapado en oro de 24k más contacto de plata pura
  
• Resortes especiales de acero inoxidable que no se corroen
  

Especificaciones:

• Velocidad media con un golpe sólido
• Funcionando alrededor de 130-135 Hz Descargado a 6.5V
• Excelente para usar con 5s a 11s, suba durante 14s
• Máquina ponderada hacia adelante de 7.5 oz
• Hecho en los EE. UU.

New V2 GDR Limited Edition Run with Wild Style Powder Coat Finish!

This is the new updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, PLUS an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

Highlights:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
  
• CNC Cut Iron with the highest precision and care
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• HD Grinch Green x Pink x Black Sparkle Powder Coat Finish
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Deluxe DK Blackened Hardware and Specialty Spring

Specifications:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Medium speed with enough hit to easily push 3 to 18 Rounds and up to 49 mag 
  
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 8-10 Volts for large groupings
• Weighs 6 oz
  

Machine Setup:

• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Made in the USA

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Seth Ciferri Lightweight Weiner Dog Shader Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron LW Weiner Dog Frame
• Lightweight V2.1 Wiener Dog weighs in at a mere 5.5oz fully built
• Gloss Black Powder Coat Finish
• Deluxe Blackened Hardware
  
• 1" 8 Wrap Soldered Coils
• Long Shader Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a phillips screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Shader Specs:

• Medium Speed with a Hard Hit 
  
• Great For Color Packing and Whip Shading
  
• Running 100-105 Hz @ 6 V Unloaded
  
• Pushing 7's-13's All Day

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.