New Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard CAin geometry set up to wrong quick and zippy for small to medium sized groupings.

Machine Specs:

• CNC Milled Carved Iron Frames
• Limited HD Matte Sand Brown Finish
• Deluxe Workhorse Blackened Steel Hardware
• 1.125" 10 Wrap Single Coil Plus Shadow Coil
  
• Quick with a Medium Stroke and Solid Medium Hit
• Running 145-150 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 Ounces
• MADE IN THE USA

New Limited Edition Aaron Cain Niner Liner!

New shadow coil machine from Aaron Cain designed, modeled and precision milled off a hand carved bio mech design by Aaron. Built in limited quantities in various color ways and finishes. Standard Cain geometry set up to run quick and zippy for small to medium sized groupings.

Machine Specs:

• CNC Mill Carved Iron Frames
• Limited HD Gloss Plateau Green Finish
• Deluxe Workhorse Blackened Steel Hardware
• 1.125" 10 Wrap Custom Purple Money Single Coil Plus Shadow Coil
  
• Quick with a Medium Stroke and Solid Medium Hit
• Running 145-150 Hz @ 6.5 V unloaded
• Pushing 3's to 9's with ease
• Weighs 6.35 Ounces
• MADE IN THE USA

Aaron Cain Octet Liner and Shader! Classic Aaron Cain styling mixed with his precision building and tuning resulting in a basic Workhorse version of his famed customs and carved machines.

- CNC Cut Iron Mini Frames
- Durable Workhorse Red Oxide Finish
- Standard Workhorse Blackened Steel Hardware
- 1" 8 Wrap Black Heat Shrink Coils
- Quick with a Medium Stroke and Solid Medium Hit
- Running 150-155 Hz @ 6.5 V unloaded
- Pushing 3's to 9's with ease
- Weighs 6.45 Ounces
- MADE IN THE USA

Aaron Cain Octet Liner and Shader! Classic Aaron Cain styling mixed with his precision building and tuning resulting in a basic Workhorse version of his famed customs and carved machines.

- New CNC Cut Iron Frame
- Durable Workhorse Red Oxide Finish
- Standard Workhorse Blackened Steel Hardware
- 1.25" 8 Wrap Black Heat Shrink Coils
- Long Stroke with a Hard Medium Hit
- Running 100-110 Hz @ 6.5 V unloaded
- Pushing 5's to 11's no problem
- Weighs 6.45 Ounces
- MADE IN THE USA

Aaron Cain Roundback Liner Ver 2.0, based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

- CNC Cut Iron Mini Frames
- Durable Workhorse Red Oxide Finish
- Standard Workhorse Blackened Steel Hardware
- 1" 8 Wrap Black Heat Shrink Coils
- Quick with a Medium Stroke and a Solid Medium Hit
- Running 150-155 Hz @ 6.5 V unloaded
- Pushing 3's to 9's with ease
- Weighs 6.45 Ounces
- MADE IN THE USA

Aaron Cain Roundback Shader Ver 2.0, based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

- New CNC Cut Iron Frame
- Durable Workhorse Red Oxide Finish
- Standard Workhorse Blackened Steel Hardware
- 1.25" 8 Wrap Black Heat Shrink Coils
- Long Stroke with a Medium Hit
- Running 100-105 Hz @ 6.5 V unloaded
- Pushing 5's to 11's no problem
- Weighs 6.45 Ounces
- MADE IN THE USA

Each spring set includes: fully punched 18 gauge front and rear springs.

Aaron Cain Liner Spring Set: All Aaron Cain Liners
Aaron Cain Shader Spring Set: All Aaron Cain Shaders
Aaron Cain 5brid Spring Set: Aaron Cain 5brid Liner/Shader

Aaron Cain x Mike Pike Custom Carved Jonesy Liner!

• Mike Pike CNC Cut Billet Brass Frame
• Biomech Carved Frame and Parts by Aaron Cain!
• Deluxe Blackened Cain Hardware
• Over Under Rear Binder Setup
• Custom Coin Wingnuts
  
• 1" 8 Wrap $5 Bill Coils
• Quick with a Medium Hit, Best for Smaller Work
  
• Running 145-150 Hz @ 6.5V Unloaded
• Pushing 3's-9's All Day
• Weighs 8 Ounces
• Limited Edition of 5
• MADE IN THE USA

New Adam Ciferri Bulldog Lapel Pins!

Rad illustration by Mike Giant of Adam Ciferri's Bulldogs he has been making since 1996. High quality 1.25" hard enamel gold lapel pins with military clutch.

Great accessory for any hat, bag, shirt, suit, purse, etc.....

Adam Ciferri Cast Iron Bulldog Shader Specs:
- Tuned for all-day, every-day street shop and/or custom tattooing
- Solid hit that easily pushes 5-15 Mag Groupings
- Runs 95-105Hz @ 6.5 Volts Unloaded
- Sand Cast Ductile Iron Frame
- Deluxe Blackened Textured Finish
- Blackened Workhorse Hardware
- 1.25" 8 Wrap Coils
- 8.5 ounce weight
- MADE IN THE USA

A few words from Adam on his history with this machine:
"In 1996 I started making machines known as "Bulldogs" with Mike Malone, as the previous builder of this classic machine had ceased making them, and there was a void to be filled. The idea for this was mine, and I ran it by Mike. He had asked me to build shaders for him to re-sell, as he was happy building liners and didn't feel much of an affinity for building shaders.

So, we embarked on our plan to start re-making the shader known as "the bulldog" and it was to be a partnership. Our partnership, like so many, had some snags, and in our haste to get the project rolling, we never nailed down some key details of the partnership. Predictably, we both made some serious mistakes, both professionally, and privately, and these mistakes ultimately led to some interesting interpretations and speculations of what my role was in making this machine.

I do not claim to own anything surrounding this machine but my work and my word.
I have made this machine, continually for nearly 20 years, and intend to continue making this machine for as long as this demand dictates.

Thank you, Workhorse Irons, for making this project happen, thank you Mike Malone for the opportunity to have a part in the lineage of this machine, and thank you, Fellow Tattooers, who buy my machines and allow me to do what I love."
Respectfully, Adam C

Adam Ciferri Ghost Dog Compression Machine

• Tuned for all-day, every-day street shop and/or custom tattooing
• Adjustable to accommodate any style of tattooing, simply adjust the compression spring after the machine is broken in
• Initially comes set up as a shader / power liner, good for Quick Color Packing or B&G Work / Color Blends
• CNC Cut Iron with the highest precision and care
• Mini frame with 1" Custom Keg Coil
• Classic Black Finish
• Deluxe Plated Hardware
• Weighs in at a mere 6 oz
• MADE IN THE USA

A few words from Adam addressing Frequently Asked Questions:

1) Is this a liner or a shader? Yes. Adjust the gap and the compression spring via the adjustment screw beneath the frame and you’ve got a whole lot of range that will make a whole spectrum of tat wizardry possible.

2) Will it push cartridges? Yes, once it’s broken in a bit, you can get down however you’d like-I certainly won’t judge you.

3) How long does it take to break in? 1-2 hours of tattooing should do it. How much does it weigh? 5.8 ounces.

4) What types of needle groupings will this thing push? 5 needle outlines and up, 7 mags and up.

Adam Ciferri Limited Cast Iron Bulldog Shader - Palleon Panther x Gold

Bulldog Shader Specs:
- Tuned for all-day, every-day street shop and/or custom tattooing
- Solid hit that easily pushes 5-15 Mag Groupings
- Runs 95-105Hz @ 6.5 Volts Unloaded
- Custom Palleon Panther Powder Coat Sand Cast Ductile Iron Frame
- Custom Textured Finish
- Gold Plated Deluxe Hardware
- Custom Pink 1.25" 8 Wrap Coils
- 8.5 ounce weight
- MADE IN THE USA

A few words from Adam on his history with this machine:
"In 1996 I started making machines known as "Bulldogs" with Mike Malone, as the previous builder of this classic machine had ceased making them, and there was a void to be filled. The idea for this was mine, and I ran it by Mike. He had asked me to build shaders for him to re-sell, as he was happy building liners and didn't feel much of an affinity for building shaders.

So, we embarked on our plan to start re-making the shader known as "the bulldog" and it was to be a partnership. Our partnership, like so many, had some snags, and in our haste to get the project rolling, we never nailed down some key details of the partnership. Predictably, we both made some serious mistakes, both professionally, and privately, and these mistakes ultimately led to some interesting interpretations and speculations of what my role was in making this machine.

I do not claim to own anything surrounding this machine but my work and my word.
I have made this machine, continually for nearly 20 years, and intend to continue making this machine for as long as this demand dictates.

Thank you, Workhorse Irons, for making this project happen, thank you Mike Malone for the opportunity to have a part in the lineage of this machine, and thank you, Fellow Tattooers, who buy my machines and allow me to do what I love."
Respectfully, Adam C

Adam Ciferri Pitbull Liner Kit

Includes everything needed to build a nice tattoo machine...

- CNC Cut Iron Pitbull Frame
- Standard Workhorse Red Oxide Finish on Frame
- Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
- Armature Bar
- Steel binding posts and Chris Smith copper contact screw
- 2 Spring Sets with each kit
- 1.125" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
- Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
- All Screws you'll need, and some extras. 
- Wrenches
- Washer Package including all washers needed... (steel, fiber, and shims)

Each spring set includes: fully punched 18 gauge front and rear springs.

Adam Ciferri Liner Spring Set: Pitbull Liner, Ghost Dog Liner
Adam Ciferri Shader Spring Set: Bulldog Shader, Ghost Dog Shader

Ghost Dog Revival Spring - For the Dan Kubin X Adam Ciferri Ghost Dog Revival

New V4 Adam Ciferri Ghost Dog Liner!

Updated version includes a new slide vise to better grip all the various tube options, dialed in geometry for better performance, plus a new rear binder setup to allow more clip cord spacing.

• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to push 3's to 14's no problem
• Runs 120-125 Hz @ 6.5 Volts Unloaded, crank up to 9-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care
• 1" Keg Coil
• Standard Workhorse Red Oxide Finish
• Standard Workhorse Blackened Hardware
• Weighs 6 oz
• MADE IN THE USA

A few words from Adam about this machine:
"The Ghost Dog Liner is set up to make solid single pass outlines with ease. Weighing in at a mere 6 ounces, this is a machine that punches way above it's weight class. Perfect for tattooers who like the weight of a rotary machine but prefer the feel and performance of a coil machine"
-Respectfully, Adam C.