Never before offered Zephyr Combo Tattoo Machine Kits, plus optional armature bar fixture!

Cory Rogers Zephyr Machine Kit - COMBO Kit includes one full size frame with geometry to build and setup the machine as either a Liner or Shader. Kit includes both Liner and Shader Armatures and Springs. 

Includes everything needed to build a nice tattoo machine... *

Components:

• CNC Cut Full Size Iron Zephyr Frame
• Blackened Finish
• Deluxe Blackened Hardware
• 1" 8 Wrap Custom Soldered Coils plus 1/4" Yoke
  
• Liner and Shader Armature Bar Included 
  
• 2 Liner and Shader Spring Sets
  
• All Screws you'll need PLUS necessary wrenches 
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specifications:

• Medium Fast Speed with a Solid Hit
• Great Liner for Traditional Work
• 135-140Hz. @ 6.5 V unloaded
• Pushes 5s to 11s Easy
• Weighs 6.75 oz

Typical Shader Specifications:

• Slow Speed with a Hard Hit and Long Stroke
  
• Great Shader for Traditional Work
• 100-105 Hz. @ 6.5 V unloaded
• Pushes 5s to 15s Easy
• Weighs 6.75 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Cory Rogers Zephyr Shader

Highlights: 

• Full Size CNC Cut Iron Shader Frame
  
• Blackened Finish
  
• Black Workhorse Hardware
  
• 8 Wrap 1.25" Black Tape Coils

Specifications:

• Slow Speed with a Hard Hit
  
• Great Shader for Traditional Work
  
• 100-105 Hz. @ 6.5 V unloaded
  
• Pushes 5s to 15s Easy
  
• Weighs 7.6 oz
  

Made in the USA

Cory Rogers Zephyr Shader Machine Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Zephyr Frame
• Blackened Finish
• Deluxe Blackened Hardware
• 1.25" 8 Wrap Custom Soldered Coils
• Shader Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a flat head screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specs:

• Slow Speed with a Hard Hit and Long Stroke
  
• Great Shader for Traditional Work
• 100-105 Hz. @ 6.5 V unloaded
• Pushes 5s to 15s Easy
• Weighs 6.75 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

CRITICAL CONNECT FOOT SWITCH

Experience the freedom and comfort that comes with a cordless foot switch. Control the ON/OFF function of Critical Connect Universal Battery or Shorty battery packs through two modes:  Continuous & Momentary. 

Features & Benefits: 

• Multi-color LED light status & battery life indicatory 
• Non-skid rubber bottom 
• Connect up to (4) Critical Connect batteries to (1) Critical Connect Foot Switch for adaptability & cordless freedom  
• Continuous & Momentary Mode Enabled 
• Compatible & wirelessly connects with: Critical Connect Universal Batteries, Critical Torque V3 Batteries, Bishop Power Wand Batteries
• Simultaneously, the Critical Connect Foot Switch is ONLY compatible with batteries listed above
• Can also be used with any standard clip cord 
• Size: 1” H x 5” D  
• Weight: 8.6 oz 
• 2-year manufacturer warranty 
• Made in the USA
• (2) AAA Batteries Included 
• Instruction Manual Included

CRITICAL CONNECT UNIVERSAL RCA BATTERY

The Ultimate Wireless Tattooing Experience

The Critical Connect Universal Battery utilizes Bluetooth 5.0 and Critical Core technology - created for consistent power and extreme accuracy. Experience ultimate power, freedom, and versatility.  

Features & Benefits: 

• Crisp OLED Display & Precise Voltage 
• Ergonomic Design 
• Utilizes Bluetooth 5.0 Technology 
• Utilizes Critical Core – created for consistent power and extreme accuracy. 
• Available RCA Connection
• Compatible with most rotary brands
• Featured jumpstart assist for large needle groupings and hard starting motors 
• Control the ON/OFF function of the batteries through two modes: Continuous & Momentary 
• Compatible & wirelessly connects with the Critical Connect Foot Switch* 
• Connect up to (4) Critical Connect, Power Wand, or Critical Torque V3 batteries to (1) Critical Connect Foot Switch
• Dual charging capable dock (optional) 
• Up to 10+ hours of tattoo time 
• Voltage Range 4.5v – 13v 
• Size: 2.4” L x 1.2” W 
• Weight: 2.0 oz 
• USB-C Charger Cable Included 
• Instruction Manual Included 

* = Critical Connect Universal Batteries are compatible & wirelessly connect with ONLY the Critical Connect Foot Switch (simultaneously, the Critical Connect Foot Switch is ONLY compatible with Critical Connect batteries)

Patents: 

• US Patent 10471246 & other US Patents Pending 
• AU Patent 2019359618 
• CN Patent 202030297770.3 & other CN Patents Pending 
• EU Patents Pending 
• CA Patents Pending 

NOTE: THIS PRODUCT CAN BE AIR SHIPPED, BUT SOME RESTRICTIONS APPLY AND SOME COUNTRIES RESTRICT THE TRANSPORT OF LITHIUM-ION BATTERIES.  PLEASE CHECK LOCAL REGULATIONS OR EMAIL CUSTOMER SERVICE FOR MORE DETAILS. 

ALL BATTERY SALES ARE FINAL.  WE DO NOT ACCEPT RETURNS OR EXCHANGES.

CRITICAL CONNECT V2 UNIVERSAL RCA BATTERY SHORTY

Still one of the smallest and lightest batteries on the market, the new Critical Connect Universal Battery Shorty features a magnetic connection and RCA converter for added versatility. Now featuring a customized jumpstart option, the Shorty Battery is perfect for quick sessions, PMU artists, and tattoo artists who prefer the lighter weight.

FEATURES:

• NEW featured customized jumpstart (ON/OFF) assist for large needle groupings and hard starting motors
• Crisp OLED Display & Precise Voltage
• Ergonomic Design
• Utilizes Bluetooth 5.0 Technology
• Utilizes Critical Core – created for consistent power and extreme accuracy
• Available in magnetic connection with option of RCA converter (included)
• Compatible with most rotary brands
• Featured customized jumpstart (6-10v) assist for large needle groupings and hard starting motors
• Control the ON/OFF function of the batteries through two modes: Continuous & Momentary
• Compatible & wirelessly connects with the Critical Connect Foot Switch
• Compatible with the Critical Universal Charging Dock
• Includes USB-C charger cable and digital instructions

SPECIFICATIONS:

• Battery weight: 1.4 oz Shorty
• Up to 5+ hours fun time, dependent on machine setup and voltage
• Battery Length: 1.67" Shorty
• Includes: 1 x V2 Battery and 1 x RCA Converter
• Manual – QR code provided in with packaging

CRITICAL CONNECT V3 BATTERY

Upgrade your experience with the Critical Connect V3 Battery. Enhanced with a 1.5” Color Display Screen and a larger 2000 mAH battery, enjoy extended duration and convenient session/run time mode.

With magnetic connection, the V3 Battery seamlessly connects directly to the Critical Torque Machine and the Bishop Power Wand. This versatile battery also includes an RCA converter, allowing for universal compatibility with any RCA machine.

FEATURES:

• Longest running battery on the market with increased battery life
• Larger, intuitive 1.5" color display
• Controls for: voltage, jumpstart ON/OFF, hourly rate tracker, Run / Session timers, presets, bluetooth (Critical Connect) for FS compatibility, and ability to modify settings.
• 5 tactical buttons for easy navigation
• Universal Compatibility with your favorite machines using the RCA Converter

SPECIFICATIONS:

• Battery weight: 2.1 oz
• Longest Running Battery in the Market (dependent on machine setup/voltage)
• Manual/Instructions – QR code provided in with packaging
• Includes: 1 x V3 Battery and 1 x RCA Converter
• CLICK HERE to download manual

CRITICAL UNIVERSAL BATTERY DUAL DOCK

Keep your workstation organized while charging all of your Critical Universal Batteries with our Critical Universal Battery Docks. The docks are compatible with all Critical Universal, Critical Connect, and Power Wand batteries.

This dock features a no fuss easy battery swap, so you can swap out batteries quickly with just one hand. 

Built-in magnetic bottom allows unlimited mounting capabilities for easy access during your tattooing sessions. 

Features: 

• Compatible for both RCA & 3.5mm Critical Universal Batteries, Critical Connect, Power Wand, and Critical Torque V3 Batteries
• 2 charging slots
• Unlimited magnetic mounting capabilities 
• Batteries fit easily, precisely and will stay in place at most angles 
• Quick battery swap
• Approximately 2-3 hours charge time from depleted to full
  

Specifications: 

• Dual Dock Specs:  4" L x 2" W x 1 1/8" H
• USB-C Cable 
• USB-C Wall Plug 
• Color: Black 

Patents:

1. US Patent Pending
2. CA Patent Pending
3. CN Patent Pending
4. EU Patent No. 008363311-0002

(DOES NOT INCLUDE THE CRITICAL UNIVERSAL BATTERY PACK)

LIMITED RUN OF CUSTOM Deluxe Workhorse Metered Power Supply

• Clean and Consistent Power
• Volts, Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 110 V US electrical plug or 220V EU electrical plug
• Comes with 3 Powerful Quarter Sized Magnets, Feet, and Desktop Stand
• Weighing in at 1 Pound
• Various Powder-coat finishes
• 4.25" x 3.6" x 1.35" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Desktop Stand - use included 3m adhesive to attach included magnets to back of power supply, then magnet the supply to the stand
• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

No corners were cut and no expenses spared; these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

*Spring Sale $75 off Limited Time Only*

Dan Kubin V3R Sidewinder

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Black Oxide Brass Frame with Black Hardware(*Finish may vary)
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

*Completely black oxided.  *please note that the brass will peak though over time where it sees heavy wear, adding to its character.

For more info please watch the V3R Setup and Tuning Video:

Dan Kubin V3R Sidewinder

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Black Oxide Brass Frame with Custom Distressed Finish(*Finish may vary)
• Blackened Parts and Motor Cap
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

*Spring Sale $75 off Limited Time Only*

Dan Kubin V3R Sidewinder

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• 24k Gold Plated Brass Frames
  
• Blackened Parts and Motor Cap
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
  
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

DK Offset Cartridge Grip!

• This is the jumbo version with a 1 1/4" Copper Grip and Stainless Steel backstem 
• Offset for better balance and visibility 
• Naturally anti-microbial copper finish
• Made in the USA by Dan Kubin 

Better tools to make better tattoos.