Never spill a rinse cup again with these new Magnetic Rinse Cup Holders!

Made by Team Victory Tattoo, these steel rinse cup holders have a heavy duty powder coat finish that will wipe down easy, plus two strong magnets to keep your rinse cup firmly in place.

Available in two size....large holds a 9 oz cup, small holds a 5 oz cup.

What’s New

Replaceable Cells

Design

• Consistent power regardless of battery percentage
• Compact size
• Durable connectors, and
• our iconic aerospace-grade aluminum design. All with simplicity in mind.

Specifications

• 2.5V to 12V voltage output adjustable in 0.1V
• NITRO pulse Configurable and Adaptive for Dan Kubin machines
• Power Level: Always maintained without decreasing no matter what’s the battery percentage
• Health Monitoring: >1,000 checks/sec to ensure that your tattoo machine is running smoothly
• Size: 30 x 69 mm (1.18 x 2.7 in)
• Weight: 72 gr (2.5 oz) with battery
• Connectors: Amphenol Armoured model, gold-plated finishing
• Display: OLED 0.49 inch
• Battery: Standard Li-ion 1835 Flat
• Battery pack comes with 2 batteries and a charger that can charge either both at a time or one at a time

Experience the power of MUSOTOKU concentrated in a wireless battery for your tattoo machines.

The ROVER R-1 is powered by easily replaceable Li-ion batteries, ensuring non-stop tattooing with spare batteries always ready to keep you focused on your work.
 Simply put: when you need a recharge, swap in a fresh battery and keep working.

Design

We've focused on what matters to you most:

• Consistent power regardless of battery percentage
• Compact size
• Durable connectors, and
• our iconic aerospace-grade aluminum design. All with simplicity in mind.

And of course, travel hassle-free with Rover's removable battery, approved for air travel.

Specifications

• 5V to 12V voltage output adjustable in 0.1V
• NITRO pulse injected on every startup
• Brushless motors: Customized start up sequence to indulge these sensitive motors.
• Power Level: Always maintained without decreasing no matter what's the battery percentage
• Health Monitoring: >1,000 checks/sec to ensure that your tattoo machine is running smoothly
• Size: 30 x 69 mm (2.7 x 1.2 in)
• Weight: 72 gr (2.5 oz) with battery
• Connectors: RCA (Amphenol heavy duty)
• Display: OLED 0.49 inch
• Battery: Li-ion 1835 Flat

What's included

• ROVER R-1 battery pack
• 2x 1835-Flat Li-ion Batteries + case
• USB compatible External charger for batteries + cable
• Instructions

Workhorse Black/Navy Rubber Bands

Specs:
- Band No. 12
- Length: 1-3/4"
- Width: 1/16"
- Gauge: 1/32"
- Platinum Crepe Grade
- Thin Rubber Bands come in 1/4 lbs bags (875 pieces), Thick Rubber Bands come in 1/4 lbs bags (350 pieces)

Saniderm Tattoo Adhesive Film is a flexible, breathable, protective layer that allows for your tattoo to heal properly, while simultaneously eliminating the need to constantly avoid water, apply lotions, etc. With Saniderm, your client can go about her/his usual routine and still expect to have a sharp, vibrant, and fully healed tattoo. 

Tips for Saniderm Tattoo Aftercare

- For maximum comfort, ensure skin is in a neutral position when applying Saniderm. When applying to elbows and knees, the joint should be in a neutral position — neither straight nor completely bent.
- Shave, shave, shave. Peeling Saniderm off of hair is unpleasant. Shave the entire area, plus an additional inch all the way around the site of the tattoo.
- Practice before you apply. If it's your first time using Saniderm, it may be a little tricky to work with. It doesn't hurt to practice with a small section first, just make sure you shave the area.
- When cutting the bandage for application, remember that rounded corners provide the best adhesion.
- It's okay, when using multiple Saniderm bandages, to overlap them by 1/2 inch (1 cm).
- If using a glycerin soap, such as green soap, be sure to rinse thoroughly, as any residue will react with the adhesives and can cause binding and irritation. Avoid loofahs or scratchy wash cloths.

Socket head cap screws 8/32 thread, 9/64 Allen wrench drive. Package contains enough screws for one machine re-build: 4 - 1/2" (for coils and binding posts), 2 - 1/4" (for a-bar and spring shelf, 1 - 1" (for tube vice), 1 - 8/32" cast iron wing nut (for tube vice), 1 - 9/64 Allen wrench (fits all screws included)

Sea Foam - 2 oz. Twist Top Bottle 

Stable Color Traditional Pigment is a powder pigment based ink, it is a bit thicker and based off traditional recipes that have been used to mix ink for years. If you know how to tattoo with a thicker powder pigment based ink, you will be stoked, it's super opaque and heals out bright, and can be cut down a bit if need be.....if you don't know how to tattoo with thicker pigment, we recommend trying our Eternal Inks.

Stable Color Inks have been researched and field tested to ensure quality and workability. The vehicle is made up of distilled water, 99.9% pure glycerin (vegan safe), and 99% ISP alcohol - No Surprises or Extra Ingredients. From bright solid fields, to pastel hues, to muted painterly tones. These inks are formulated for maximum flexibility, achieving the results you desire.
MADE IN THE USA

*Now Standard with New Labels that include a Full Ingredient List, Batch Number, and Expiration Date.