RinseCup CleanUp

RinseCup CleanUp is the safest and easiest way to dispose of the rinse cup in the tattoo industry. And we're confident that RinseCup CleanUp is the fastest as well.

• No more leaking trash bags
  
• No more shoving paper towels into a contaminated rinse cup
  
• No more carrying contaminated water

Tips:

In order to get approximately 90 uses, the recommended amount is ½ of a cap (½ cap = 2 grams)
Using more speeds up the reaction time
The colder the water, the slower the reaction time

100% Made in the USA

What’s New

Replaceable Cells

Design

• Consistent power regardless of battery percentage
• Compact size
• Durable connectors, and
• Our iconic aerospace-grade aluminum design. All with simplicity in mind.

Specifications

• 2.5V to 12V voltage output adjustable in 0.1V
• NITRO pulse Configurable and Adaptive for Dan Kubin machines
• Power Level: Always maintained without decreasing no matter what’s the battery percentage
• Health Monitoring: >1,000 checks/sec to ensure that your tattoo machine is running smoothly
• Size: 30 x 69 mm (1.18 x 2.7 in)
• Weight: 72 gr (2.5 oz) with battery
• Connectors: Amphenol Armoured model, gold-plated finishing
• Display: OLED 0.49 inch
• Battery: Standard Li-ion 1835 Flat
• Battery pack comes with 2 batteries and a charger that can charge either both at a time or one at a time

Battery Warning

Warning: Lithium-ion batteries may explode or burn due to improper use. Using these batteries for purposes not intended by the manufacturer, including outside a battery pack and/or without a BMS, may cause severe injury and damage. We are not responsible for any injuries caused by lithium-ion batteries - use at your own risk.

All rechargeable batteries have inherent risks under any circumstance. Use caution with working with li-ion batteries (lithium-ion), LiPo (lithium-ion polymer), and any rechargeable cells (together "rechargeable batteries"), as they have dangerous charging characteristics and are known to explode or burn if mishandled. A purchaser and user of rechargeable batteries should educate themselves on rechargeable batteries, especially as to charging, discharging, assembly, and storage. We are not responsible for any damage caused by the misuse or mishandling of rechargeable batteries.

ROVER R-1 RCA

Experience the power of MUSOTOKU concentrated in a wireless battery for your tattoo machines.

The ROVER R-1 is powered by easily replaceable Li-ion batteries, ensuring non-stop tattooing with spare batteries always ready to keep you focused on your work.
 Simply put, when you need a recharge, swap in a fresh battery and keep working.

Design

We've focused on what matters to you most:

• Consistent power regardless of battery percentage
• Compact size
• Durable connectors, and
• our iconic aerospace-grade aluminum design. All with simplicity in mind.

And of course, travel hassle-free with Rover's removable battery, approved for air travel.

Specifications

• 5V to 12V voltage output adjustable in 0.1V
• NITRO pulse injected on every startup
• Brushless motors: Customized start up sequence to indulge these sensitive motors.
• Power Level: Always maintained without decreasing no matter what's the battery percentage
• Health Monitoring: >1,000 checks/sec to ensure that your tattoo machine is running smoothly
• Size: 30 x 69 mm (2.7 x 1.2 in)
• Weight: 72 gr (2.5 oz) with battery
• Connectors: RCA (Amphenol heavy duty)
• Display: OLED 0.49 inch
• Battery: Li-ion 1835 Flat

What's included

• ROVER R-1 battery pack
• 2x 1835-Flat Li-ion Batteries + case
• USB compatible External charger for batteries + cable
• Instructions

Black/Navy Rubber Bands

• Band No. 12
  
• Length: 1-3/4"
  
• Width: 1/16"
  
• Gauge: 1/32"
  
• Platinum Crepe Grade 
  
• Thin Rubber Bands come in 1/4 lbs bags (875 pieces), Thick Rubber Bands come in 1/4 lbs bags (350 pieces) 
  

Limited Nickel x Nickel

Highlights:

• CNC Cut Iron Tetris Liner Frame with Nickel Plated Finish 
• 1" Custom Reflective Keg Coil
  
• Deluxe Polished Nickel Plated Binders, A-bar, and Thumbscrew

Specifications:

• Medium speed with enough power to push 3's to 14's no problem
• Tuned for all-day, every-day street shop and/or custom tattooing
• Runs about 130 Hz @ 6.5 Volts Unloaded, crank up to 7-8 Volts for large groupings
  
• 6.5 oz weight
  

Made in the USA

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

HOLIDAY SALE - Deluxe Mike Pike Bullseye Liner Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Frame
• Black HD Powder Coat Finish
• Deluxe Blackened Hardware
• Spring Loaded Swing Gate Vise
• 1" 8 Wrap Coils

Typical Liner Specs:

• Medium Speed with a Hard Hit
• Running 125 - 135 Hz @ 6.5V unloaded
• Pushing 3's-11's with ease
• Weighs 7.2 oz

Made in the USA

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Workhorse Irons Dot Box

Small batch of Workhorse Dot Boxes now available!! After many requests we decided to do another small batch of these. Originally we made Dot Boxes about 10 years ago using Pulse Width Modulation to create intermittent power bursts for dot work. But we stopped making them after a few years when some others copied the design and outsourced overseas to make a cheap knock off version. 

This has been a fun side project we have been working on to help turn any coil machine into a dot machine for making Dotwork Tattoos using controlled intermittent power bursts. The Dot Box is simple and easy to use! It works in-line and plugs directly into your power supply in the clip cord hole and has a range of speed controlled by simply turning the delay knob.

Yes, there are many ways to do dots and if you have a strategy that works well for you already, more power to you! Our Dot Box is just a different approach, and if nothing else, a fun tool to play with, enjoy!

For Best Performance:

• The Dot Box works best with medium or slow, hard hitting liners....or any shader
• Quick and zippy light hitting machines are not as effective
• Best dots are made using Tight Rounds....Loose Rounds seem to blow out a little bit
• Some machines need to be turned up a Volt or two for better results
• Not recommended for use with Rotary machines...use with Rotary machines can damage the motor
• Timing of the tattoo machine when in use with the Dot Box will create various rhythms and patterns, adjust voltage and Dot Box Delay for varying performance and effect
• Match hand speed to the intermittent power bursts to ensure clean dot patterns.... if the Dot Box is at a slow setting you will need to move slower, fast setting move faster (duh).

*this is not a power supply, you will still need a power supply, the dot box simply plugs into your power supply.

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Workhorse Model 6 Shader - Nickel x Nickel

Formerly built by Marv Lerning, this is an updated and modernized version of Marv's 6 Liner inspired by the Waters Model 6 Frame. Now with updated geometry for more power and efficiency, plus swing gate vise added to guarantee ease of use with any and all tubes. 

We are stoked to release this new Workhorse Model built in house by our highly trained and knowledgeable machine techs. Bringing us back to our roots with an affordable base model machine made with shared parts and technology to reduce costs. We offer lots of limited and custom high-end machines these days and wanted to release a new base model option at base model pricing.

Specs:

• Polished Nickel Frame
• Deluxe Nickel Workhorse Hardware
• Swing Gate Steel Vise
• Custom 6 Wrap 1.25" Coils
• High End Specialty Steel Springs
• Silver Contact Screw
• Reverse Rear Binder Setup with frame ground on coil deck
• Long Stroke with a solid hit great for 5s to 15s
  
• Medium Speed, running around 105-110 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA
  

10% OFF DISCOUNT APPLIES IN CART!  No Code Needed.

Specifications:

• CNC Cut Iron Frame
  
• Designed by Seth Ciferri
  
• Red Oxide Finish
• Geometry for 1" Coils
• Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
  

Made in the USA

Saniderm

Saniderm Tattoo Adhesive Film is a flexible, breathable, protective layer that allows for your tattoo to heal properly, while simultaneously eliminating the need to constantly avoid water, apply lotions, etc. With Saniderm, your client can go about her/his usual routine and still expect to have a sharp, vibrant, and fully healed tattoo. 

Tips for Saniderm Tattoo Aftercare:

• For maximum comfort, ensure skin is in a neutral position when applying Saniderm. When applying to elbows and knees, the joint should be in a neutral position — neither straight nor completely bent.
  
• Shave, shave, shave. Peeling Saniderm off of hair is unpleasant. Shave the entire area, plus an additional inch all the way around the site of the tattoo.
  
• Practice before you apply. If it's your first time using Saniderm, it may be a little tricky to work with. It doesn't hurt to practice with a small section first, just make sure you shave the area.
  
• When cutting the bandage for application, remember that rounded corners provide the best adhesion.
  
• It's okay, when using multiple Saniderm bandages, to overlap them by 1/2 inch (1 cm).
  
• If using a glycerin soap, such as green soap, be sure to rinse thoroughly, as any residue will react with the adhesives and can cause binding and irritation. Avoid loofahs or scratchy wash cloths.

Screw Kit

Socket head cap screws 8/32 thread, 9/64 Allen wrench drive.

Package contains enough screws for one machine re-build:

• 4 - 1/2" (for coils and binding posts)
• 2 - 1/4" (for a-bar and spring shelf
• 1 - 1" (for tube vice)
• 1 - 8/32" cast iron wing nut (for tube vice)
• 1 - 9/64 Allen wrench (fits all screws included)

Sea Foam - 2 oz. Twist Top Bottle 

Stable Color Traditional Pigment is a powder pigment based ink, it is a bit thicker and based off traditional recipes that have been used to mix ink for years. If you know how to tattoo with a thicker powder pigment based ink, you will be stoked, it's super opaque and heals out bright, and can be cut down a bit if need be.....if you don't know how to tattoo with thicker pigment, we recommend trying our Eternal Inks.

Stable Color Inks have been researched and field tested to ensure quality and workability. The vehicle is made up of distilled water, 99.9% pure glycerin (vegan safe), and 99% ISP alcohol - No Surprises or Extra Ingredients. From bright solid fields, to pastel hues, to muted painterly tones. These inks are formulated for maximum flexibility, achieving the results you desire.
MADE IN THE USA

*Now Standard with New Labels that include a Full Ingredient List, Batch Number, and Expiration Date.

Sensi-Wrap Self-Adherent Bandage Rolls

A lightweight compression bandage which sticks to itself, not to other materials or skin.

• Easily torn without scissors
  
• Will not slip
  
• Individually poly bagged
  
• Available in black or in an assorted rainbow pack
  
• Each rainbow pack contains the following colors: red, green, purple, dark blue, pink & light blue. 
  
• 1" x 5 Yards (30 Rolls) and 2" X 5 Yards (36 Rolls) available
  
• Latex or Latex free