Front & rear set; includes washers, screws, and a silicon bronze contact screw.

*BLACK FRIDAY Special Edition run at special pricing! Murdered Out Black on Black on Black Bottle Openers setup to run quick and zippy for smaller groupings!

Aaron Cain Bottle Opener Specs:

- CNC Cut Iron Frames
- Blackout Finish
- Deluxe Workhorse Blackened Hardware
- 1.25" 8 Wrap Custom Black Gaffers Coils
- Medium Speed, Long Stroke, Medium Hit
- Running 105-110 Hz @ 6.5 V unloaded
- Pushing 5's to 9's with ease, turn up for 11's
- Weighs 6.45 Ounces
- MADE IN THE USA

And yes, it does actually open bottles :)

Limited Edition Adam Ciferri Pitbull Liner - Nickel x Black

Specifications:
- Tuned for all-day, every-day street shop and/or custom tattooing
- Heavy hit that easily pushes 5's to 11's
- Runs 125-130z @ 6.5 Volts Unloaded
- CNC Cut Iron with the highest precision and care
- Brushed Nickel Plated Finish
- Blackened Deluxe Hardware
- 1.125" 8 Wrap Custom Black Coils
- Weighing in at 6.4 ounces
- MADE IN THE USA

A few words from Adam on his history with this machine:
"I think most of you know that I've been making a version of this machine since about 1999, but, I don't know how many of you really know the story of how this machine came to be…

In mid 1999, the first Pitbull outliners were made by chopping down some bulldog shaders. They ran a bit slow and punchy for what I'd call an outliner, but, they definitely did the job. Over the years, there have been a few iterations of this machine, and almost all of them were based on, basically, cutting up a shader and, either making due with the geometry, or adjusting the geometry.

What we have here is the new version I designed for Workhorse Irons. This machine is based on the dedicated geometry that I've wanted for this machine since, just about, day one. It lends itself to a few different liner configurations without needing to apply any hocus-pocus. Small groupings? Sure. Medium groupings? Yes. Big, fat, ig'nunt-ass outlines? Fuck yeah-continually, since 1999! This machine has a great range, but is basically set up to make big fucking outlines, quickly."
Respectfully, Adam C

New Mike Pike PMA Direct Drive Rotary!

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guarantee to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

- Limited Edition Run of Purple Anodized Bodies with Blackened Motor Cap, Swing Gate Vise, and Hardware.
-High-grade Aluminum body precision milled frames and components
- Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
- Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
- Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy
- Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
- Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
- Lightweight weighing in at a mere 4.5 oz
- Clipcord Connection

Made with love in the USA by Mike Pike and his 40+ years of experience tattooing and building machines.

Thanks and enjoy,
Mike Pike

*BLACK FRIDAY Special Edition run at special pricing! Limited Edition OG Mini Fastback frames with chopped vise and Seth Swing Gate added with a Black on Black Finish!

Seth Ciferri Mini Fastback Liner

- CNC Cut Iron Mini Fastback Liner Frame with Chopped Vise
- Textured HD Black Powder Coat Finish
- Black Workhorse Deluxe Hardware and Raw Brass Coin Thumbscrew
- Spring Loaded Swing Gate Vise Guaranteed to Lock Down on Any Tube
- 1" 8 Wrap Custom Coils
- Medium Slow Speed with a Medium Hard Hit
- Running 125-130 Hz @ 6 V Unloaded
- Pushing 5's to 11's No Problem
- Weighs 7.2 oz
- MADE IN THE USA

*BLACK FRIDAY Special Edition run at special pricing! Limited Edition OG Mini Fastback frames with chopped vise and Seth Swing Gate added with a Black on Black Finish!

Seth Ciferri Mini Fastback Shader

- CNC Cut Iron Mini Fastback Shader Frame with Chopped Vise
- Textured HD Black Powder Coat Finish
- Black Workhorse Deluxe Hardware and Raw Brass Coin Thumbscrew
- Spring Loaded Swing Gate Vise Guaranteed to Lock Down on Any Tube
- 1" 8 Wrap Custom Coils
- Medium Speed with a Solid Hit and Long Stroke
- Running 110 Hz @ 6 V Unloaded
- Pushing 5's to 13's No Problem
- Weighs 7.2 oz
- MADE IN THE USA

Seth Ciferri Cholomatic™ Liner

- Iron Chopped Cholomatic™ Liner Frame with HD Black Powder Coat Finish
- Bolt-on Brass Swing Gate Vise
- Antiqued Brass Deluxe Ciferri Hardware
- 1.25" 8 Wrap Workhorse Coils
- Medium Speed with a Solid Hit
- Running 135-140 Hz @ 6 V Unloaded
- Best Pushing 3's to 11's
- Well Balanced 7 Ounce Weight
- MADE IN THE USA

Limited Edition run of Supreme Style OG Flastside Walkers!

We are very stoked to finally release this special edition run of machines that have been in the works for months. From digging up the old pattern, casting frames, various machining tweaks, hand grinding, stamping, polishing, plating, custom coils, quarters straight from the US mint, silver contacts, assembly and fine tuning....these machines are top notch with no expense spared in their creation.

Technical Specs:

• Cast Iron OG Walker Frame
• Hand Ground, Prepped and Lightly Polished Nickel Plated Finish
• Deluxe Nickel Plated Hardware, Plus Silver Contact
• Hand Brazed Collet Vise, great for use with Disposable and Steel Tubes
• 2019 Milled Quarter Spring Saddle, Plus Dime Washers
• 1.25" 8 Wrap Custom Coils
  
• Medium Speed with a Long Stroke and Solid Hit
• Running 100-105 Hz at 6V Unloaded
• Pushing 5's to 11's No Problem
• Weighing in at ounces about 7 ounces
• As always, MADE IN THE USA

Limited Edition run of Supreme Style OG Flastside Walkers!

We are very stoked to finally release this special edition run of machines that have been in the works for months. From digging up the old pattern, casting frames, various machining tweaks, hand grinding, stamping, polishing, custom coils, quarters straight from the US mint, silver contacts, assembly and fine tuning....these machines are top notch with no expense spared in their creation.

Technical Specs:

• Cast Iron OG Walker Frame
• Hand Ground, Prepped and Lightly Polished with Black Finish
  
• Deluxe Blackened Hardware, Plus Silver Contact
• Hand Brazed Collet Vise, great for use with Disposable and Steel Tubes
• 2020 Milled Quarter Spring Saddle, Plus Dime Washers
• 1.25" 8 Wrap Square Bottom Custom Coils with Specialty Cores
• Slow Speed with a Hard Hit
• Running 125-130 Hz at 6V Unloaded
• Pushing 5's to 11's No Problem
• Weighing in at ounces about 7 ounces
• As always, MADE IN THE USA

Limited Edition run of Supreme Style OG Flastside Walkers!

We are very stoked to finally release this special edition run of machines that have been in the works for months. From digging up the old pattern, casting frames, various machining tweaks, hand grinding, stamping, polishing, custom coils, quarters straight from the US mint, silver contacts, assembly and fine tuning....these machines are top notch with no expense spared in their creation.

Technical Specs:

• Cast Iron OG Walker Frame
• Hand Ground, Prepped and Lightly Polished with Black Finish
• Deluxe Blackened Hardware, Plus Silver Contact
• Hand Brazed Collet Vise, great for use with Disposable and Steel Tubes
• 2020 Milled Quarter Spring Saddle, Plus Dime Washers
• 1.25" 10 Wrap Square Bottom Custom Coils with Specialty Cores
• Medium Speed with a Long Stroke and Solid Hit
• Running 100-105 Hz at 6V Unloaded
• Pushing 5's to 11's No Problem
• Weighing in at ounces about 7 ounces
• As always, MADE IN THE USA