Limited Run of Seth Ciferri Version 2 Weiner Dog Machine Kits

Includes everything needed to build a nice tattoo machine...

Components:

• CNC Cut Iron Weiner Dog V2 Frame
  
• Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
  
• Standard Workhorse Red Oxide Finish on Frame
  
• Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
  
• Armature Bar (liner or shader, depends on what you order) 
  
• Steel binding posts and Chris Smith copper contact screw 
  
• 2 Spring Sets with each kit
  
• 1" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
  
• Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
  
• All Screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
• Wrenches (since the kit utilizes TORX screws, including the T25 and T15 wrenches needed to handle them.) 
  
• Washer Package including all washers needed... (steel, fiber, and shims)

NOTE: I cannot and will not be available to offer ANY building or tuning advice for these kits. these include all of the same parts I use to build my production machines, and the quality is above and beyond anything I've used or offered in the past.

We are proud to say that all parts are made in the USA.
Thanks, good luck, and have fun with your new project!

Seth C.

Sharps Container (Gallon)

• Non-tortuous lid design accommodates a variety of sizes of sharps
  
• Translucent lid for quick ID of fill level
  
• Each container locks for final disposal
  
• Nestable containers save space and reduce shipping costs
  
• Horizontal drop maximizes container volume
  
• Wall Mount/Free stand
  
• 1 Gallon Size

Sharps Container (Quart)

• Non-tortuous lid design accommodates a variety of sizes of sharps
  
• Translucent lid for quick ID of fill level
  
• Each container locks for final disposal
  
• Nestable containers save space and reduce shipping costs
  
• Horizontal drop maximizes container volume
  
• Wall Mount/Free stand
  
• 1 Quart Size

Shim Pack

Pack of 25

Available in 10 Shims or 5 Shims

The Knuckle Duster model is one of SOBA's newer designs part of his Green Lion machine line and completely made in the Green Lion workshop!  Welded frame, 2 piece tube vise, hand made coil washers and coils!

Highlights:

• Welded Ductile Iron Frame 
  
• Custom SOBA Upright 
  
• Custom Mixed Green Powder Coat Finish
• Two Piece Vise 
• Deluxe Blackened Hardware
  
• Custom 1" 8 Wrap Coils with Custom Washers and Hand Embossed Covers
• Limited Edition Run

Specifications:

• Super Smooth for B&G, Soft and Quick for Building Layers
  
• 115-120 Hz at 6.5 V unloaded
  
• Weighs 5.4 oz
  

Made in the USA

SOBA B&G Race Horse Shader

New B&G Race Horse Shaders machined from Lightweight Aerospace Aluminum with Swing Gate Vises guaranteed to lock tight on any tube! These machines are setup and designed to run quicker and lighter, great for building up layers, doing color blends and portrait work.

Highlights:

• Anodized Featherweight Aluminum Frame
  
• Steel Swing Gate Vise guaranteed to lock tight on all tubes
  
• Deluxe Black Hardware
  
• 8 Wrap 1" Custom Coils
  

Specifications:

• Super Smooth for B&G, Soft and Quick for Building Layers
  
• 115-120 Hz at 6.5 V unloaded
• Weighs 5.4 oz
  
  

Made in the USA

SOBA B&G Race Horse Shader

New Limited Run of B&G Race Horse Shaders machined from Lightweight Aerospace Aluminum with Swing Gate Vises guaranteed to lock tight on any tube! These machines are setup and designed to run quicker and lighter, great for building up layers, doing color blends and portrait work.

Highlights:

• BLACK Anodized and Laser Etched Featherweight Aluminum Frame
  
• Swing Gate Vise guaranteed to lock tight
  
• Deluxe Black Hardware
  
• 8 Wrap 1" Custom Fish Scale Coils

Specifications:

• Super Smooth for B&G, Soft and Quick for Building Layers
  
• 115-120 Hz at 6.5 V unloaded
  
• Weighs 5.4 oz
  

Made in the USA

SOBA B&G Race Horse Shader

New Limited Run of B&G Race Horse Shaders machined from Lightweight Aerospace Aluminum with Swing Gate Vises guaranteed to lock tight on any tube! These machines are setup and designed to run quicker and lighter, great for building up layers, doing color blends and portrait work.

Highlights:

• Anodized and Laser Etched Featherweight Aluminum Frame
  
• Swing Gate Vise guaranteed to lock tight
  
• Deluxe Black Hardware
  
• 8 Wrap 1" Custom Fish Scale Coils

Specifications:

• Super Smooth for B&G, Soft and Quick for Building Layers
  
• 115-120 Hz at 6.5 V unloaded
  
• Weighs 5.4 oz
  

Made in the USA

New SOBA Bolo Liner!!

"I’m very stoked to share my new @workhorseirons production model with you all! The one piece BOLO machine is now available!!
🔥
I combined the geometry of my Bolo braze-up. Streamlined it. The machine shop at Workhorse NAILED it!
💚
These will come standard as you see here. Swing gate tube vise for all the tubes. The textured eggshell finish is the color of Irish tea and is complimented by polished up phenolics, olive green gaffers and brass hardware.
🔥
These are finely tuned. With no load most of them run in the 140hz range. At 6 volts you will get smooth medium to fine lines- think 05 and 08 microns. At 7.5 they will bury a straight 9- think brand new sharpie."

Enjoy, BJ (Sobaone)

Highlights:

• CNC Cut Ductile Iron Frame 
  
• Drilled Out and Lightened Upright 
  
• Swing Gate Vise with and Internal Spring for ease of use
  
• Deluxe Black Brass finish
  
• Custom Deluxe Antiqued Brass Hardware
  
• Deluxe 1" 8 Wrap Olive Gaffers T-Top Coils with Polished Phenolics 

Specifications:

• Medium Speed with a Solid Hit
• Great for Smaller to Medium Sized Groupings
  
• Pushing 3's to 9's easy, turn up a little for 11's
  
• Running 140-145 Hz @ 6.5 V Unloaded
  
• Weighs 6.8 oz
  

Made in the USA

This machine kit comes with parts to build as either a liner or a shader. Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Ductile Iron Frame 
  
• Drilled Out and Lightened Upright 
  
• Swing Gate Vise with and Internal Spring for ease of use
  
• Custom Bead Blast Raw Frame Ready for Any Finish
• Custom Deluxe Blackened Hardware
• 1" 8 Wrap Custom SOLDERED Coils
• Liner and Shader Armature Bar
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)

Typical LINER Specifications:

• Medium Speed with a Solid Hit
• Great for Smaller to Medium Sized Groupings
  
• Pushing 3's to 9's easy, turn up a little for 11's
  
• Running 140-145 Hz @ 6.5 V Unloaded
  
• Weighs 6.8 oz

Typical SHADER Specifications:

• Medium Speed with a Solid Hit 
  
• Great for Quick Color Packing, turn down and it back off nice for Blends / B&G
  
• Pushing 5's to 11's easy, turn up a little for 13's
  
• Running 110-115 Hz @ 6.5 V Unloaded
  
• Weighs 6.8 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

New SOBA Bolo Shader!!

"I’m very stoked to share my new @workhorseirons production model with you all! The one piece BOLO machine is now available!!
🔥
I combined the geometry of my Bolo braze-up. Streamlined it. The machine shop at Workhorse NAILED it!
💚
These will come standard as you see here. Swing gate tube vise for all the tubes. The textured eggshell finish is the color of Irish tea and is complimented by polished up phenolics, olive green gaffers and brass hardware."

Enjoy, BJ (Sobaone)

Highlights:

• CNC Cut Ductile Iron Frame 
  
• Drilled Out and Lightened Upright 
  
• Swing Gate Vise with and Internal Spring for ease of use
  
• Deluxe Black Brass Finish
  
• Custom Deluxe Antiqued Brass Hardware
  
• Deluxe 1" 8 Wrap Olive Gaffers T-Top Coils with Polished Phenolics 

Specifications:

• Medium Speed with a Solid Hit 
  
• Great for Quick Color Packing, turn down and it back off nice for Blends / B&G
  
• Pushing 5's to 11's easy, turn up a little for 13's
  
• Running 110-115 Hz @ 6.5 V Unloaded
  
• Weighs 6.8 oz
  

Made in the USA

New SOBA Boomerang Liner!!

CNC Milled version of SOBA's braze-up and bolt-up Boomerang, streamlined into a one piece frame with very versatile swing gate vise.

These are finely tuned. With no load most of them run in the 140hz range. At 6 volts you will get smooth medium to fine lines- think 05 and 08 microns. At 7.5 they will bury a straight 9- think brand new sharpie.

Highlights:

• CNC Cut Ductile Iron Frame 
  
• Drilled Out and Lightened Upright 
  
• Swing Gate Vise with and Internal Spring for ease of use
  
• Custom Diamond Pearl Powder Coat Finish
  
• Custom Deluxe Antiqued Brass Hardware
  
• Deluxe 1" 8 Wrap Black Gaffers T-Top Coils

Specifications:

• Medium Quick Speed with a Solid Hit 
  
• Great for Smaller to Medium Sized Groupings
  
• Pushing 3's to 9's easy, turn up a little for 11's
  
• Running 140-145 Hz @ 6.5 V Unloaded
  
• Weighs 6.8 oz
  

Made in the USA

The #sobagrip is a comfort grip for Apple Pencil 1st and 2nd Generation.

Made from firm rubber, the grip is very comfortable for long drawing sessions.

The new 2nd Gen Apple Pencil can only be charged and paired by magnetically snapping to the iPad Pro. This makes all other grips obsolete! My solution is the channel which allows the pencil to be charged even with the grip still on it! The channel is wide enough to be compatible with the Apple iPad Pro smart cover. (Should you use a different brand of cover, the #sobagrip can be EASILY removed for charging. Easy on, easy off!)

The 2nd Gen Apple Pencil has a double tap feature to quickly switch between brushes. The scoop in the front end of the #sobagrip allows for this function.

The #sobagrip is 100% made in Michigan!!

Apple Pencil and iPad obviously not included.