Workhorse A1 Slideback Tattoo Machine Frame

Components:

• CNC Cut Iron Frame
  
• Designed by Mike Pike, modeled off a classic A1 Tattoo Machine
  
• Raw Finish ready for paint, powder coat, plating or oxide
  
• Geometry for 1.25" Coil Liner or Shader
  
• Swing Gate Vise with extra screws to work with 1.25" coils or with a yoke and 1" coils
  
• Weighs 2.8 oz

*Frame and Swing Gate Vise parts only, no other parts or tools included.

Made in the USA

Workhorse Alignment Tool

Designed by SOBA, this is the best tool possible to perfectly align your abar with your tube vise and coils, plus turn it sideways and it features a slot you can slide your abar into to tweak it if your frame is a little out of whack.

- 5/16" x 3.5" Stainless Bar
- Knurled Grip
- Armature Bar Nipple Slot on the top for alignment use
- Armature Bar Groove in side for tweaking / turning your abar if necessary....we highly recommend that only those experienced with machine building and repair use the tweak option....it is not always necessary and not always the best way to make things hit flat, just one of many options.
- A must have for machine building and machine repair
- Skills not included, sorry

*machine obviously not included

Deluxe Workhorse Armature Bar Fixture Set!

This is a very simple, yet effective tool used by our builders and many others. The perfect tool to easily attach springs to your a-bar while ensuring all parts are kept parallel and straight.

Deluxe Fixture works for 1/2" rear springs. It comes with or without our high-quality alignment tool and comes standard with a hole in the base to hold the tool and use the fixture as a machine stand, freeing up both hands for repairs.

Armature Bar Fixture Specs:

• Hardened Steel Base and Top Brackets to Ensure Years of Use 
• Standard 1/2" Wide Slot for Rear Springs
• Standard 3/8" Wide Slot For Armature Bars
• 1" x 3" Overall Part Dimensions
• Insert Alignment Tool in hole to use as a stand to help hold your machine while working on it

Alignment Tool Specs:

• 5/16" x 3.5" Stainless Bar
• Knurled Grip
• Armature Bar Nipple Slot on the top for alignment use
• Armature Bar Groove inside for tweaking / turning your a-bar if necessary.... we highly recommend that only those experienced with machine building and repair use the tweak option....it is not always necessary and not always the best way to make things hit flat, just one of many options.

Additionally:

• These are must haves for machine building and machine repair
• As always, all parts made in the USA
• Skills nor machine are included, sorry
  

Workhorse Armature Bar Grommets (100)

Offered in 3 different levels of hardness:

• White = Soft
• Black = Medium
• Clear = Hard

Workhorse Brass Tool now available!

These tools were a fair amount of work, but a fun project and very useful daily carry addition. They work great as a bottle opener, door opener, button pusher, defense mechanism, or really any other creative purpose. Brass is naturally antimicrobial, making it a great material for insulating oneself from high touch surfaces that may contain harmful microbes and disease.

Highlights:

• Cut from 1/4" 260 Brass
• Hand Chamfered, Sanded, Tumbled, Stamped, and Lightly Polished
• 1.5" x 4.3" Overall Dimension
• 0.915" Finger Hole
  

Made in the USA

**The use of a Copper Alloy surface is a supplement to and not a substitute for standard infection control practices; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces. The Copper Alloy surface material has been shown to reduce microbial contamination, but it does not necessarily prevent cross-contamination.

Deluxe Workhorse Metered Power Supply

• Clean and Consistent Power
• Volts, Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 2 to 16 Volt Output
  
• 110 V US electrical plug or 220V EU electrical plug
• Comes with 3 Powerful Quarter Sized Magnets, Feet, and optional Stand
• Weighing in at 1 Pound
• Workhorse Olive Green Powdercoat finish
• 4.25" x 3.6" x 1.35" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Desktop Stand - use included 3m adhesive to attach included magnets to back of power supply, then magnet the supply to the stand
• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

• **PLEASE NOTE: Once you apply the adhesive side of the magnets to the power supply itself, please allow at least 12-24 hours for it to settle in. Do not attempt to stick the magnets onto your work station right away as that has not given it enough time to attach!

No corners were cut and no expenses spared, these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

NEW Deluxe Workhorse V3 Power Supply w/ Internal Battery and Metered Readouts!

• Clean and Consistent Power fed through an internal rechargeable battery
  
• 10-12 Hour Battery Runtime
• Runs off battery power or corded power
• Usable while charging with built in smart charge programming
• Large Volt Readout with smaller Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 2 to 14 Volt Output
• 5 Amp Max Peak Output at 50% Duty
• 110 V US electrical plug or 220V EU electrical plug
• 4-cell lithium-ion battery with a 47 Watt hour rating (2800mAh at 16.8V)
• Comes with 4 Powerful Quarter Sized Magnets, Feet, and optional Stand
• Weighing in at 1.25 Pound
• HD Black Powdercoat finish
• 4.5" x 3.6" x 1.5" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

• **PLEASE NOTE: Once you apply the adhesive side of the magnets to the power supply itself, please allow at least 24 hours for it to settle in. Do not attempt to stick the magnets onto your work station right away as that has not given it enough time to attach!

No corners were cut and no expenses spared; these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

**Obviously does not include clip cord, foot switch, or tattoo machine. We do have numerous options of each of these items if you are in need of one or all of the above. Thanks for looking!

 Magnet Installation – Please Read

1. Clean and dry the back of the power supply.
2. Apply magnets and press firmly for 30–60 seconds.
3. Allow at least 24 hours for the adhesive to fully bond.

Do not mount or hang immediately.

NEW Deluxe Workhorse V3 Power Supply w/ Internal Battery and Metered Readouts!

LIMITED EDITION Textured Purple!

• Clean and Consistent Power fed through an internal rechargeable battery
  
• 10-12 Hour Battery Runtime
• Runs off battery power or corded power
• Usable while charging with built in smart charge programming
• Large Volt Readout with smaller Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 2 to 14 Volt Output
• 5 Amp Max Peak Output at 50% Duty
• 110 V US electrical plug or 220V EU electrical plug
• 4-cell lithium-ion battery with a 47 Watt hour rating (2800mAh at 16.8V)
• Comes with 4 Powerful Quarter Sized Magnets, Feet, and optional Stand
• Weighing in at 1.25 Pound
• Limited HD PURPLE Powdercoat finish
• 4.5" x 3.6" x 1.5" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

No corners were cut and no expenses spared; these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

**Obviously does not include clip cord, foot switch, or tattoo machine. We do have numerous options of each of these items if you are in need of one or all of the above. Thanks for looking!

NEW Deluxe Workhorse V3 Power Supply w/ Internal Battery and Metered Readouts!

• Clean and Consistent Power fed through an internal rechargeable battery
  
• 10-12 Hour Battery Runtime
• Runs off battery power or corded power
• Usable while charging with built in smart charge programming
• Large Volt Readout with smaller Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 2 to 14 Volt Output
• 5 Amp Max Peak Output at 50% Duty
• 110 V US electrical plug or 220V EU electrical plug
• 4-cell lithium-ion battery with a 47 Watt hour rating (2800mAh at 16.8V)
• Comes with 4 Powerful Quarter Sized Magnets, Feet, and optional Stand
• Weighing in at 1.25 Pound
• HD SEAFOAM Powdercoat finish
• 4.5" x 3.6" x 1.5" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

No corners were cut and no expenses spared; these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

**Obviously does not include clip cord, foot switch, or tattoo machine. We do have numerous options of each of these items if you are in need of one or all of the above. Thanks for looking!

Custom Printed Workhorse Face Mask (2 Pack)

• Made of Quilted Thick 3-Ply Fabric
• Elastic Straps - One Size Fits Most
• Two Masks included in each order
• Three Custom Sublimated Design Options
• Washable and Reusable
• Handmade In England not China :)

CDC Information on How to wear a Face Covering - Click Here

Please note: These custom face masks are NOT medical grade masks (which are recommended by the World Health Organization (WHO) as an infection preventative measure, i.e. grade FFP2/N95). So please DO NOT purchase custom face masks with the false understanding they will prevent infection from Coronavirus. They are more about protecting others to reduce spread. Due to the personal hygiene nature of the product, your custom face masks are non-returnable.

***COVID-19 UPDATE: We are shipping daily and have now expanded our requirements to include Medical Professionals. We still do not sell to at home tattooers but gladly sell to any medical professionals that need supplies. You are top priority, thank you for all you do!


Occasionally we offer various styles of Hand Poke Tattoo Tools....whether for fun or for personal preference, these are well made useful tools for various types of tattooing.

These fit standard tubes and needles, simply setup like a regular machine and bang away.

Occasionally we offer various styles of Hand Poke Tattoo Tools....whether for fun or for personal preference, these are well made useful tools for various types of tattooing.

These fit standard tubes and needles, simply setup like a regular machine and bang away.

Workhorse Hand Poke Tool

Occasionally we offer various styles of Hand Poke Tattoo Tools....whether for fun or for personal preference, these are well made useful tools for various types of tattooing.

These fit standard tubes and needles, simply setup like a regular machine and bang away.

Specifications:

• Welded 3 Piece Frame
• Bowers Pinch Vise + Coil Core + Baby Sized Custom Armature
• Gloss Black Powder Coat finish
• Polished Brass Custom WHI Thumbscrew 

Made in the USA.

Workhorse Hand Poke Tool

Occasionally we offer various styles of Hand Poke Tattoo Tools....whether for fun or for personal preference, these are well made useful tools for various types of tattooing.

These fit standard tubes and needles, simply setup like a regular machine and bang away.

Specifications:

• Welded 3 Piece Frame
• Bowers Pinch Vise + Coil Core + Baby Sized Custom Armature
• HD Seafoam Powder Coat finish
• 24k Gold Plated Parts
  

Made in the USA.