DK Swift Tips - 9 to 18 Round (Box of 24 Tips)
DK Swift Tips - 9 to 18 Round (Box of 24 Tips)
DK Swift Tips - 9 to 18 Round (Box of 24 Tips)
Workhorse Irons

DK Swift Tips - 9 to 18 Round (Box of 24 Tips)

$28.00 USD

New DK Swift Tip System!  

This is a new and convenient way to use standard needles with a metal grip to maintain the rigid feel and counterweight of a steel tube. If setup correctly, this system allows for a proper barrier from cross contamination without use of an autoclave. It is still recommended to wipe the grip with a sterilant between uses as you would your workstation. 

Quick and easy setup for standard needle on bar use with much less vibration than standard disposable tubes. Less vibration means less harm to your hands, tendons, and overall body stress for greater longevity and health. 

Utilizing a metal grip and small click in plastic tips, this system creates much less waste...about 95% less plastic than most disposable grips! 

DK Swift Tips - 9 to 18 Round - Box of 24 Tips (Grip Not Included)

*Must be used with DK Swift Tip Grip

These tips have great visibility and come to a nice point.  The biggest benefit is being able to see more needle even when you don't have a lot of needle hanging out.

The shape of the round tips is in between a round and a diamond. That said, it is the best of both worlds.  It allows for maximum versatility and stability for a wider range of sizes.

This tip configuration is for your larger round needle groupings.

I prefer it for my traditional 9 rounds up to 14. (It still has more room for a larger grouping but would more than likely be for a tight grouping or bug pin if in that 18 Round size.)

If using a tight 9, or 11, or in a bug pin configuration, I recommend the 5-11 size

These tips are hydrophobic and have an antimicrobial additive in them. That said, you may need to check with your local health dept for protocol on single use plastic products used in the tattooing process. (such as ink caps)

*Blister packaged tips coming soon

Made in house at DK Rotary in Kansas City MO, USA

Better tools to make better tattoos.

You may also like

Sold Out
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
Workhorse Irons
$795.00 USD
Dan Kubin Sidewinder 46er - Black x Gold
Dan Kubin Sidewinder 46er - Black x Gold
Workhorse Irons
$1,100.00 USD
Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
Workhorse Irons
$685.00 USD
Sold Out
Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
Workhorse Irons
$995.00 USD
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold
Workhorse Irons

New Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Gold x Gold

$795.00 USD

Dan Kubin X Adam Ciferri Ghost Dog Revival V2!

Updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, PLUS an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

Highlights:

  • CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
  • CNC Cut Iron with the highest precision and care for superior conductivity
  • Hinge / Compression machine functionality eliminating any rear spring issues or breakage
  • Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
  • Custom 24k Gold Plated Finish
  • Deluxe DK 24k Gold Plated Hardware

Specifications:

  • Tuned for all-day, every-day street shop and/or custom tattooing
  • Medium speed with enough hit to push 3's to 14's no problem
  • Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
  • Weighs 6 oz

    Machine Setup:

    • Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
    • Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
    • Cartridges: possible, but not highly recommended.

    Made in the USA

    "Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

    There have been many things I’ve learned from the original Revival, along with many more years experience with the compression spring/bearing pivot. Combine that with a superior magnetic circuit that Adam and Workhorse have dialed in, and you get something quite magical. We are very pleased with the performance, versatility, and ergonomics of this machine.
    It’s functional voltage range starts at around 4.5 volts and keeps going up without chatter or excessive heat. With the engineering that went into the spring setup, the user does not have to settle for squishy nipples to prevent their springs from breaking.
    This machine comes stock as a strong, medium speed liner (or fast shader) at around 105-110 cps loaded (about 125-130 cps unloaded). Because of the large voltage range, it is capable of all size needle groupings. (*the contact screw can be backed out to run in the 90 cps range as well). For a slappier, punchier hit, the backer spring under the contact spring can be removed.
    I have put much attention into the weight distribution, to put the weight forward and low, providing superior stability, and preventing wrist fatigue.

    Ladies and gentlemen, the Ghostdog Revival!"

    Thanks - Dan.

      Customer Reviews

      Based on 2 reviews Write a review
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Dan Kubin Sidewinder 46er - Black x Gold
      Workhorse Irons

      Dan Kubin Sidewinder 46er - Black x Gold

      $1,100.00 USD

      Dan Kubin's Newest Sidewinder, the V46er!


      The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.
      This machine is very strong off the tip with a great follow-through. Its number one purpose is as a strong, precise, off the tip liner; though it has proven to be much more capable.


      Highlights:
      • BLACK HD POWDER COAT FRAME + 24k Gold Plated Gold Parts and Hardware
      • Rustic beauty at its finest!  Verde patina copper with a durable baked-on lacquer protective coating. Finish may vary as this is a very unique custom patina.
      • Wider springs for more durability.
      • Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
      • Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
      • Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
      • Smooth, easy clamping tube vice.
      • Forward weight distribution for better ergonomics.
      • 24k Gold Plated Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.  
      • O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
      • Reliable Mabuchi motor. -because they run forever without losing consistency. 
      Specifications:
      • Recommended voltage range: 4 - 6.5 volts
      • Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs.  The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)
      • Polarity: Positive up - spins motor clockwise - slaps harder, ideal for large grouping liners. Positive down - spins motor counterclockwise -slightly passive hit, ideal for shading and fine line
      • Weighs 6 oz
      Made in the USA

      Customer Reviews

      Based on 2 reviews Write a review
      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel
      Workhorse Irons

      Dan Kubin X Adam Ciferri Ghost Dog Revival V2 - Polished Nickel

      $685.00 USD

      V2 Dan Kubin X Adam Ciferri Ghost Dog Revival Hybrid

      Updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, PLUS an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

      Highlights:

      • CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
      • CNC Cut Iron with the highest precision and care for superior conductivity
      • Hinge / Compression machine functionality eliminating any rear spring issues or breakage
      • Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
      • Custom Polished Nickel Plated Finish
      • Deluxe DK Blackened Hardware and Spring

      Specifications:

      • Tuned for all-day, every-day street shop and/or custom tattooing
      • Medium speed with enough hit to push 3's to 14's no problem
      • Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 9-10 Volts for large groupings
      • Weighs 6 oz

        Machine Setup:

        • Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
        • Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
        • Cartridges: possible, but not highly recommended.

        Made in the USA

        "Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

        There have been many things I’ve learned from the original Revival, along with many more years experience with the compression spring/bearing pivot. Combine that with a superior magnetic circuit that Adam and Workhorse have dialed in, and you get something quite magical. We are very pleased with the performance, versatility, and ergonomics of this machine.
        It’s functional voltage range starts at around 4.5 volts, and keeps going up without chatter or excessive heat. With the engineering that went into the spring setup, the user does not have to settle for squishy nipples to prevent their springs from breaking.
        This machine comes stock as a strong, medium speed liner (or fast shader) at around 105-110 cps loaded (about 125-130 cps unloaded). Because of the large voltage range, it is capable of all size needle groupings. (*the contact screw can be backed out to run in the 90 cps range as well). For a slappier, punchier hit, the backer spring under the contact spring can be removed.
        I have put much attention into the weight distribution, to put the weight forward and low, providing superior stability, and preventing wrist fatigue.

        Ladies and gentlemen, the Ghostdog Revival!"

        Thanks - Dan.

          Customer Reviews

          Based on 2 reviews Write a review
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel
          Workhorse Irons

          Dan Kubin Sidewinder 46er - Antique Nickel x Nickel

          $995.00 USD

          Dan Kubin's Newest Sidewinder, the V46er!


          The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.
          This machine is very strong off the tip with a great follow-through. Its number one purpose is as a strong, precise, off the tip liner; though it has proven to be much more capable.

          Highlights:
          • Antique Nickel Plated Frame and Matching Motor Cover with Blackened Deluxe DK Components
          • Wider springs for more durability.
          • Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
          • Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
          • Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
          • Smooth, easy clamping tube vice.
          • Forward weight distribution for better ergonomics.
          • Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.  
          • O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
          • Reliable Mabuchi motor. -because they run forever without losing consistency. 

          Specifications: 
          • Weighs 6 oz
          • Recommended voltage range: 4 - 6.5 volts
          • Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs.  The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)
          • Polarity: Positive up - spins motor clockwise - slaps harder, ideal for large grouping liners. Positive down - spins motor counterclockwise -slightly passive hit, ideal for shading and fine line
          Made in the USA

          Customer Reviews

          Based on 2 reviews Write a review
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord
          Workhorse Irons

          Dan Kubin Sidewinder 46er - Antique Nickel RCA + Clip Cord

          $995.00 USD

          Dan Kubin's Newest Sidewinder, the V46er! 

          The 46er is a culmination of my versions 4-6 Sidewinders, remastered and enhanced to perfection. This machine features a very large stroke adjustment range that can suite single needle work, all the way up to the largest liners and mag shaders.
          This machine is very strong off the tip with a great follow-through. Its number one purpose is as a strong, precise, off the tip liner; though it has proven to be much more capable.

          Highlights:
          • Antique Nickel Plated Frame and Matching Motor Cover with Blackened Deluxe DK Components.
          • Wider springs for more durability.
          • Large, easy to turn, hardened steel stroke wheel. Pre-set stroke range and middle timing mark to prevent the machine from getting too far out of tune when experimenting.
          • Hardened alloy steel impact pin. Positioned towards the rear of the frame to help with noise
          • Large cam with precise timing mark. Allows for easier, and more precise impact alignment checks
          • Smooth, easy clamping tube vice.
          • Forward weight distribution for better ergonomics.
          • Beautiful brass armature bar, perfectly balanced for a strong, confident, and consistent hit.  
          • O-ring groove in the bar allows for a more silent option (though will reduce performance as well)
          • Reliable Mabuchi motor. -because they run forever without losing consistency. 
          Specifications:
          • Weighs 6 oz
          • Recommended voltage range: 4 - 6.5 volts
          • Approximate stroke range: 2 - 4mm (keep in mind the stoke goes up more due to the springs.  The stroke of a Sidewinder cannot be compared to other rotaries as the hit is completely different)

          RCA Specifications:

          • RCA version is wired for the harder hit mode only using RCA connection
          • This RCA motor housing was designed around a Critical Universal battery pack, but fits with most battery packs I have tried, such as Musotoku, Ink Claw, and Papa.
          • This will also work good with a right-angle RCA cord.
          • Clip Cord option still works, it is just wired backwards (Positive Down for Harder Hit)
          • The position of the battery makes the machine’s balance point much more forward, like a pen.
          • NEW RCA / Clip cord version with straight up battery position 

          Made in the USA


          Customer Reviews

          Based on 2 reviews Write a review
          Next: DK 1" Swift Tip Cover
          Back to Dan Kubin
          Next: DK 1" Swift Tip Cover

          Customer Reviews

          Based on 4 reviews
          100%
          (4)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          A
          Anonymous
          Excellent!

          Excellent!

          L
          Lukas Scriven

          Love these things

          M
          Melissa Parker
          Fantastic

          As usual, DK strikes again. Simple set up, easy take down. No need for tons of tubes and disposable grips. This keeps the work station less packed, and quick and easy to do my work. Thanks for thinking about the artist Dan.

          W
          Wayne Ferranti
          46er

          Fast delivery easy to order. Workhorse had the machine that I wanted in the brushed nickel. We were all surprised the machine wasn’t sold out definitely a happy tattooer now!!!