Each Spring Set Includes: Fully punched front spring and rear spring

20 Gauge Liner Short Rear- Classic Liner, OG Micro Jones Liner, Modern Classic Liner

Liner - Fastback Liner, Kung Fu Grip Owen Liner

Liner Medium - Weiner Dog Liner V2.0, Weiner Dog Liner V2.1, Belmont Liner, Chopped Micro Jones Liner, Micro Jones Liner

Shader Long Front - Kung Fu Grip Owen Shader, Fastback Shader

Shader Short Rear - Weiner Dog Shader V2.0, Weiner Dog Shader 2.1, Classic Shader, Modern Classic Shader, Micro Jones Shader

Stainless Steel Liner Forked Rear- Seth Ciferri Mini Fastback Liner

Liner Medium Stainless Steel Forked Rear- Belmont, Weiner Dog Liner (2.0, 2.1,2.2), and Micro Jones Liner

Stainless Steel Liner- Supreme Liners

Narrow Stainless Steel Rear Liner- Doorbell Liners

Stable Ink Caps, Small and Large.

- Small Cap Dimensions: Diameter: .428, Height: .47, Base Width: .69
- Large Cap Dimensions: Diameter: .55, Height: .50, Base Width: .81
Available in packs of 1000.

New DK Swift Tip System!  

This is a new and convenient way to use standard needles with a metal grip to maintain the rigid feel and counterweight of a steel tube. If setup correctly, this system allows for a proper barrier from cross contamination without use of an autoclave. It is still recommended to wipe the grip with a sterilant between uses as you would your workstation. 

Quick and easy setup for standard needle on bar use with much less vibration than standard disposable tubes. Less vibration means less harm to your hands, tendons, and overall body stress for greater longevity and health. 

Utilizing a metal grip and small click in plastic tips, this system creates much less waste...about 95% less plastic than most disposable grips! 

DK Swift Tips - 5 to 11 Round - Box of 24 Tips (Grip Not Included)

*Must be used with DK Swift Tip Grip

These tips have great visibility and come to a nice point.  The biggest benefit is being able to see more needle even when you don't have a lot of needle hanging out.

The shape of the round tips is in between a round and a diamond. That said, it is the best of both worlds.  It allows for maximum versatility and stability for a wider range of sizes.

This tip configuration is for your medium round needle groupings.

I prefer it for my straight 5 rounds up to straight 9RL, or a tight or bug pin 11 Round. (if using a traditional 11 Round, I recommend the 9-18 size)

These tips are hydrophobic and have an antimicrobial additive in them. That said, you may need to check with your local health dept for protocol on single use plastic products used in the tattooing process. (such as ink caps)

*Blister packaged tips coming soon

Made in house at DK Rotary in Kansas City MO, USA

Better tools to make better tattoos.

Disposable Paper Barrier Products

Use these disposable sheets for client cover-ups, table cover-ups, or as equipment drape sheets. The embossed texture offers more comfort to the patient. The sheets and lap cloths are opaque light blue for more privacy when draping. Disposable, they decrease the risks of contamination from one patient to another and eliminate laundering costs. Made with soft tissue/poly, poly backing, these offer economic strength and fluid holdout.

Each option comes in the following full case sizing:

• Pillowcase 21x30 = Case of 100
  
• Drape Sheet 40x48 = Case of 100
  
• Drape Sheet 40x60 = Case of 100
  
• Drape Sheet 40x90 = Case of 50
  
• Lap Cloth 13x18 = Case of 500

Stencil Stuff® was developed in 2005 by Professional Tattoo Artists who knew there had to be a better way to apply detailed, precision stencils and achieve longer lasting stencil artwork.

Stencil Stuff® is a creamy lotion that has been laboratory formulated and tested to be Non-Toxic and Safe for most skins!

Stencil Stuff® makes the transfer crisper, cleaner and sharper than using all other traditional methods and eliminates the possibility of cross-contamination.

Stencil Stuff® eliminates the need to bloodline or gray line. It also works exceptionally well if outlining is needed or desired.

If there is a need to remove the tattoo stencil for repositioning, it can be removed with our newest product Prep Stuff™ which is also a Skin Sanitizer to be used before you tattoo. Prep Stuff™ is a revolutionizing new product for prepping the skin prior to tattooing! It kills 99.9% of germs and microbes including staph without removing vital skin oils!

The original thermal copy tattoo stencil can be reapplied many times without the worry of using damaged stencils or having to make another.

One 8 oz. (236 ml) Bottle of Stencil Stuff® is $20.00 and will last approximately 4 - 6 months...only pennies per application.

Each Spring Set Includes: Fully punched front and rear spring.

Liner Spring Set - Mini Rusto Liner, Speedballer Liner, Mini Clipper Liner
20 Gauge Short Rear Set - Pilot Liner Standard/Kung Fu, Iron Rusto Power Liner
Shader Short Rear Set - OG Brass B&G Walker Shader
Shader Medium Set - Mini Rusto Shader, Large Mag Clipper Shader, B&G Racehorse Shader
Shader Short Set - Mini Clipper Shader

Shader Long Set - Pilot Shader Standard/Kung Fu

New DK Swift Tip System!  

This is a new and convenient way to use standard needles with a metal grip to maintain the rigid feel and counterweight of a steel tube. If setup correctly, this system allows for a proper barrier from cross contamination without use of an autoclave. It is still recommended to wipe the grip with a sterilant between uses as you would your workstation. 

Quick and easy setup for standard needle on bar use with much less vibration than standard disposable tubes. Less vibration means less harm to your hands, tendons, and overall body stress for greater longevity and health. 

Utilizing a metal grip and small click in plastic tips, this system creates much less waste...about 95% less plastic than most disposable grips! 

• 1" Brass Grip for use with DK Swift Tips

• Simply bag grip with designated bag and click Swift Tip into bagged grip for an improved tattoo experience

• 95% Less Plastic Waste than Disposable Plastic Tubes

• If bagged properly there is no reason to autoclave the grip

• Made in the USA by Dan Kubin 

Better tools to make better tattoos.

New DK Swift Tip System!  

This is a new and convenient way to use standard needles with a metal grip to maintain the rigid feel and counterweight of a steel tube. If setup correctly, this system allows for a proper barrier from cross contamination without use of an autoclave. It is still recommended to wipe the grip with a sterilant between uses as you would your workstation. 

Quick and easy setup for standard needle on bar use with much less vibration than standard disposable tubes. Less vibration means less harm to your hands, tendons, and overall body stress for greater longevity and health. 

Utilizing a metal grip and small click in plastic tips, this system creates much less waste...about 95% less plastic than most disposable grips! 

This is a bag that serves as a barrier on your Swift tip grip.

Simply slide over the grip and snap the tip in over the bag.

This allows for a proper barrier from cross contamination.

It is recommended to still wipe the grip off with a sterilant as you would your workstation or armrest.

This bag is meant for the 1" grip.

*BUY IN BULK AND SAVE 20%

Better tools to make better tattoos.

Workhorse x Good Judy ECO Premium Membrane Cartridges 

Tested and trusted, these pre-made Eco Conscious Tattoo Cartridges provide outstanding quality from WORKHORSE IRONS & GOOD JUDY INC. Their collaboration ensures a check of sustainability you can count on, certified by internationally-recognized third party organizations.

The packaging for these needles is completely unbleached, PFAS-free, compostable and recyclable, and is another step in our companies' commitment to environmental protection.

With more qc checks and higher quality needles, this top-notch product is perfectly tailored for tattoo artists by tattoo artists, after 20 years of continuously improving their quality and configurations.

Specs:

• #12 Needles on all Traditional and Loose Groupings
• #10 Needles on all Tight Groupings / Bugpins
• Loose Rounds are equivalent to Round Shaders
• Medium Tension Membrane for better performance
• Made with High Quality 316L Japanese Steel Needles
  
• Easy open slide box
• 20 Cartridges Per Box
• All packaging is unbleached, PFAS free and compostable...even the needle trays and blister paper!

Compostability / Biodegradability :

 EN 13432:2000 | ASTM D6400:2019 | ASTM D6868:2017

We have invested years of effort and resources to ensure these cartridges and packaging meet the compostability standards of excellence. Although costly to create, we are proud of the superior results! We strive to offer more environmentally conscious tattoo products and diminish single use plastic while propelling eco-tattooing into ubiquity. This endeavor is yet another milestone toward our eco-friendly mission.

 

*please let us know if we don't have any groupings you need and we will add them to the line up

Twin Blade Disposable Razors

•  50 razors per box or 300 per case 
  
• Long Lasting
  
• Superior Quality
  
• Disposable
  
• Clear Plastic Guard
• Unisex

Each Spring Set includes: Fully punched front and rear spring.

Liner Spring Set - S&H Liner, Half Cup Liner, Mean Mugger Liner, Tea Cup Liner
Liner Medium Spring Set - Brass Jonesy Liner
Shader Long Spring Set - Tea Cup Shader
Shader Medium Spring Set - Brass Jonesy Shader.
Shader Short Spring Set -  Half Cup Shader, S&H Shader
Shader Short Medium Spring Set -  Mean Mugger Shader

8 layer coils hand wrapped, soldered with 47 uf capacitor and lugs.

Available as either 1" Mini Coils or 1.25" Full Size Coils

Each spring set includes: fully punched 18 gauge front and rear springs.

Aaron Cain Liner Spring Set: All Aaron Cain Liners
Aaron Cain Shader Spring Set: All Aaron Cain Shaders
Aaron Cain 5brid Spring Set: Aaron Cain 5brid Liner/Shader

Deluxe Workhorse Armature Bar Fixture Set!

This is a very simple, yet effective tool used by our builders and many others. The perfect tool to easily attach springs to your a-bar while ensuring all parts are kept parallel and straight.

Deluxe Fixture works for 1/2" rear springs. It comes with or without our high-quality alignment tool and comes standard with a hole in the base to hold the tool and use the fixture as a machine stand, freeing up both hands for repairs.

Armature Bar Fixture Specs:

• Hardened Steel Base and Top Brackets to Ensure Years of Use 
• Standard 1/2" Wide Slot for Rear Springs
• Standard 3/8" Wide Slot For Armature Bars
• 1" x 3" Overall Part Dimensions
• Insert Alignment Tool in hole to use as a stand to help hold your machine while working on it

Alignment Tool Specs:

• 5/16" x 3.5" Stainless Bar
• Knurled Grip
• Armature Bar Nipple Slot on the top for alignment use
• Armature Bar Groove inside for tweaking / turning your a-bar if necessary.... we highly recommend that only those experienced with machine building and repair use the tweak option....it is not always necessary and not always the best way to make things hit flat, just one of many options.

Also:

• These are must haves for machine building and machine repair
• As always, all parts made in the USA
• Skills nor machine are included, sorry
  

Saniderm

Saniderm Tattoo Adhesive Film is a flexible, breathable, protective layer that allows for your tattoo to heal properly, while simultaneously eliminating the need to constantly avoid water, apply lotions, etc. With Saniderm, your client can go about her/his usual routine and still expect to have a sharp, vibrant, and fully healed tattoo. 

Tips for Saniderm Tattoo Aftercare:

• For maximum comfort, ensure skin is in a neutral position when applying Saniderm. When applying to elbows and knees, the joint should be in a neutral position — neither straight nor completely bent.
  
• Shave, shave, shave. Peeling Saniderm off of hair is unpleasant. Shave the entire area, plus an additional inch all the way around the site of the tattoo.
  
• Practice before you apply. If it's your first time using Saniderm, it may be a little tricky to work with. It doesn't hurt to practice with a small section first, just make sure you shave the area.
  
• When cutting the bandage for application, remember that rounded corners provide the best adhesion.
  
• It's okay, when using multiple Saniderm bandages, to overlap them by 1/2 inch (1 cm).
  
• If using a glycerin soap, such as green soap, be sure to rinse thoroughly, as any residue will react with the adhesives and can cause binding and irritation. Avoid loofahs or scratchy wash cloths.