RinseCup CleanUp

RinseCup CleanUp is the safest and easiest way to dispose of the rinse cup in the tattoo industry. And we're confident that RinseCup CleanUp is the fastest as well.

- No more leaking trash bags
- No more shoving paper towels into a contaminated rinse cup
- No more carrying contaminated water

Tips:

In order to get approximately 90 uses, the recommended amount is ½ of a cap (½ cap = 2 grams)
Using more speeds up the reaction time
The colder the water, the slower the reaction time

100% Made in the USA

The First and Only USDA Certified Petroleum Replacement developed for specifically for Tattoo artists and Collectors. Lubricant, Barrier and Aftercare all in one. Looks and feels like Petroleum based products, but is 100% Natural!

For use DURING and AFTER a tattoo. DURING- Use during the tattoo to soothe and replace petroleum based products. AFTER- Wash hands before use. Gently massage evenly into tattoo. Apply a small amount 2-3 times daily.

We offer two convenient sizes - 6 oz size for use while tattooing as well as a 1/4 oz sample size, great to give to customers for aftercare so you can ensure your work is well taken care of and heals out as it should.

Paper Surgical Tape

- 12 Rolls, 1" x 10 yards
- Provides maximum breath-ability decreasing risk of skin compromise
- Superior adhesion
- Easy to apply, tears off easily
- Hypoallergenic
- Latex Free

Tongue Depressors (Sterile or Non-Sterile)

- Non-Sterile 500 per box - Sterile Individually packaged in an Easy-peel package, 100 per box
- Precision cut
- Ultra polished smooth edge
- Sturdy, strong wood construction
- Uniform in size and color

Workhorse x Good Judy ECO Premium Membrane Cartridges 

Tested and trusted, these pre-made Eco Conscious Tattoo Cartridges provide outstanding quality from WORKHORSE IRONS & GOOD JUDY INC. Their collaboration ensures a check of sustainability you can count on, certified by internationally-recognized third party organizations.

The packaging for these needles is completely unbleached, PFAS-free, compostable and recyclable, and is another step in our companies' commitment to environmental protection.

With more qc checks and higher quality needles, this top-notch product is perfectly tailored for tattoo artists by tattoo artists, after 20 years of continuously improving their quality and configurations.

Specs:

• #12 Needles on all Traditional and Loose Groupings
• #10 Needles on all Tight Groupings / Bugpins
• Loose Rounds are equivalent to Round Shaders
• Medium Tension Membrane for better performance
• Made with High Quality 316L Japanese Steel Needles
  
• Easy open slide box
• 20 Cartridges Per Box
• All packaging is unbleached, PFAS free and compostable...even the needle trays and blister paper!

Compostability / Biodegradability :

 EN 13432:2000 | ASTM D6400:2019 | ASTM D6868:2017

We have invested years of effort and resources to ensure these cartridges and packaging meet the compostability standards of excellence. Although costly to create, we are proud of the superior results! We strive to offer more environmentally conscious tattoo products and diminish single use plastic while propelling eco-tattooing into ubiquity. This endeavor is yet another milestone toward our eco-friendly mission.

 

*please let us know if we don't have any groupings you need and we will add them to the line up

Eco-responsible & liquid resistant paper ink caps, thanks to a natural bio coating.

These ink caps can be sprayed, submerged, dunked and soaked in liquid and their inner bio-lining will not let them leak. We've tested it with many inks, using isopropyl alcohol and water and they will last as long as you need them too. Other paper ink caps begin to leak in minuets, wasting ink and making a huge mess.

Finally you can count on a paper ink cap to be reliable and truly an eco-responsible option.

Features:

Pack of 25 - Available in 10 Shims or 5 Shims

ReproFX Spirit™ Thermal Tattoo Transfer Papers are made for the professional artist from the highest quality materials to create the highest visibility purple dyes and best ripstop stencil sheets in the world.

• Compatible with all thermal printers
• Consistant, high quality images
• Skin safe & shelf-stable

Manufactured in the United States since 1948.

Vitamin A&D Ointment Available in Foil Packs

- 1 Box of Foil Packs, 5-Gram, 144-Count. $11
- 1 Case, 6 boxes of Foils Packs, 5-Gram, 864 Count. $54

New Lightweight Cloop Cord handmade in Spain by Noe Quintillan....the Clip Cord is the newest version of Noe's super lightweight and compact clip cord. Now with a re-designed spring for better tension with less metal fatigue. Easier to use and will last even longer.

The most compact, lightweight, and versatile clip cord available. Designed and built to be a compact lightweight cord on Kubin machines, but also provide a universal fit on any clip cord setup. Simple and clean. Less is more.

Built in magnet. 5.9 feet long, 1.2 ounce weight with little to no pull.

Dan Kubin V3R Sidewinder

"Now with an updated weighted impact screw! I found that it helps with the stability of the hit, and improved overall performance. Also, please note the rubber band position is another simple tuning element. For lower volt operations, or harder hit, position the band pointing slightly up. This will reduce return spring tension thus making it operate better at slower speeds and decreasing the amount of give. Bonus is less strain on the rubber band.

Previous updates to the V3R include adding the coveted DK thumbscrew, moving the impact screw (the most crucial and misunderstood tuning element) to the front end of the armature bar and added a hardened steel impact pin so the machine will be easier to reset, and will hold its tune much longer. I also used a few tricks from the V7 to reduce spitting and make it hit a bit more rigid on the low end and added the backer springs as well to prevent spring breakage.

These updates are in addition to the 2019 updated version which still has the same dependable and proven geometry as the original v3, but now revisited and remastered with subtle differences to improve overall performance. This is the most user friendly Sidewinder yet. The differences, others than aesthetics, is the numbered stroke wheel, an impact screw timing mark on the cam and frame (like the v5-6). Additionally, I did a new spring loaded vice lock setup that effortlessly clamps down your tube. The stroke wheel is indexed in 10 positions, and numbered accordingly." 

Thanks for looking - Dan.

Machine Specs:

• Polished Raw Brass Frame (for earned natural patina it will gain over time and use) plus Blackened Hardware
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin. Also good for shading and color blends if you adjust your stroke and voltage.
  
• The motor is the same as the  V2-V4 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Numbered stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar: wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples.
  
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

For more info please watch the V3R Setup and Tuning Video:

Bottle Bags (Box of 500)
6" x 8" Poly Bag

Limited Run of Seth Ciferri Version 2 Weiner Dog Machine Kits

Includes everything needed to build a nice tattoo machine...

- CNC Cut Iron Weiner Dog V2 Frame
- Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
- Standard Workhorse Red Oxide Finish on Frame
- Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
- Armature Bar (liner or shader, depends on what you order)
- Steel binding posts and Chris Smith copper contact screw
- 2 Spring Sets with each kit
- 1" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
- Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
- All Screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
- Wrenches (since the kit utilizes TORX screws, i'm including the T25 and T15 wrenches needed to handle them.)
- Washer Package including all washers needed... (steel, fiber, and shims)

*Currently Boxed in Workhorse Boxes - we are out of the fancy ones in the pic, sorry!!

*NOTE: i cannot, and will not be available to offer ANY building or tuning advice for these kits. these include all of the same parts i use to build my production machines, and the quality is above and beyond anything i've used or offered in the past.

and we are proud to say that all parts are made in the USA.

thanks, good luck, and have fun with your new project!

seth c.