Green Soap (Gallon)
- Effective detergent/cleaner for removal of dried blood and protein soils from skin and scalp
- Effective for cleaning surgical instruments and surgical apparatus before sterilization
- Preferred by most professional tattoo artists
- Great for cleaning instruments and general use

Green Soap Directions:
Mix 1 part green soap to 8 parts distilled water (example; 1 oz. green soap to 8 oz. distilled water,or 16 oz. green soap to 128 oz. / 1 gallon distilled water.) 
Used to rinse, cleanse, and cool down – before, during, and after tattooing. A must have for any tattoo artist. 
Add some green soap to a foaming hand-soap container and shave your clients with green soap foam.

DILUTING SUGGESTIONS: 
For cleaning instruments before sterilization - mix 1 part soap to 16 parts distilled water
For use as a shampoo or hand cleanser - use full strength
. For general use - mix 1 part soap to 8 parts distilled water

Gun Metal Grey - 2 oz. Twist Top Bottle

Stable Color Traditional Pigment is a powder pigment based ink, it is a bit thicker and based off traditional recipes that have been used to mix ink for years.  If you know how to tattoo with a thicker powder pigment based ink, you will be stoked, it's super opaque and heals out bright, and can be cut down a bit if need be.....if you don't know how to tattoo with thicker pigment, we recommend trying our Eternal Inks.

Stable Color Inks have been researched and field tested to ensure quality and workability. The vehicle is made up of distilled water, 99.9% pure glycerin (vegan safe), and 99% ISP alcohol - No Surprises or Extra Ingredients. From bright solid fields, to pastel hues, to muted painterly tones. These inks are formulated for maximum flexibility, achieving the results you desire.
MADE IN THE USA

*Now Standard with New Labels that include a Full Ingredient List, Batch Number, and Expiration Date.

New Workhorse Irons Long Sleeve T-Shirts designed by Guy Le!

Quality NAFTA approved Black t-shirt with Guy Le original imagery. Large front chest, plus sleeve prints.

Comfortable fit, not too tight, not too loose. Enjoy.

New Workhorse Irons Long Sleeve T-Shirts designed by Guy Le!

Quality NAFTA approved Black t-shirt with Guy Le original imagery. Large front chest, plus sleeve prints.

Comfortable fit, not too tight, not too loose. Enjoy.

We decided to pour some Hand Sanitizer to help get more out there for those that need some. We are currently only offering these 2 oz bottles in SIX PACKS as we are still partially closed and short handed. Each order will have a total of 12 ounces of Hand Sanitizer.

Specs:

• Ingredients: Ethyl Alcohol 70%, Aloe Barbadensis Leaf, Carbomer, Dimethicone, Triisopropanolamine, Water
• 2 oz Bottle with Twist Top
• Made from plant based Ethanol with a mild lavender scent
• Made in the USA
   

SANITIZER CONTAINS ALCOHOL WHICH MAY BE DRYING TO THE HANDS. PLEASE KEEP OUT OF REACH OF CHILDREN. DO NOT INGEST HAND SANITIZER IS FLAMMABLE AND RAGS SOAKED IN HAND SANITIZER WILL BE FLAMMABLE. RAGS OR GARMENTS SOAKED IN HAND SANITIZER SHOULD NOT BE DRIED IN A DRYER EVEN AFTER BEING WASHED. OTHER WARNINGS APPLY AND WILL BE POSTED ON PRODUCT LABELS. 

10 Pack of Heat Shrink for 1.25" Full Size Coils

Heavy Duty Antiqued Iron Wingnut, 8/32 Thread.

Hex and Torx Key set includes 1 of each of the following: 9/64 Allen Key, 5/64 Allen Key, 1/16" Allen Key, T20 Torx Key, T15 Torx Key, 1.55 MM Allen Key, Hex L Key .5", 

Stable Ink Caps, Small and Large.

- Small Cap Dimensions: Diameter: .428, Height: .47, Base Width: .69
- Large Cap Dimensions: Diameter: .55, Height: .50, Base Width: .81
Available in packs of 1000.

Joshua Bowers 2 Stroke Drect Drive+

Two machines in one! Easily change from a standard solid hitting Direct Drive to a Rotary with give simply by changing the polarity / flipping your clip cord connection.

Now with a Swing Gate Vise that works great with all tubes!

A Few Words From Joshua about this machine:
The time is finally here to introduce my new direct drive project that I’ve been developing with @workhorseirons . I’d like to introduce the 2 Stroke. I called it the 2 Stroke because it has the unique ability among direct drives as having two very unique and different stroke characteristics in one machine. When the machine is hooked up with the positive to the top binding post the 2 Stroke is a killer, snappy super capable long stroke direct drive. Flip the clip cord so the positive is on bottom and it changes the stroke completely. The 2 Stroke has a torsioned swing arm in the cam that reacts to the resistance of the skin. On the “give” setting the needles hit the skin softer and less abrasive but the best part is that unlike typical “give” mechanisms the give on the 2 Stroke doesn’t control needle depth. The needles will hit the skin with less force but still penetrate the skin the same depth as if no give was used. This ensures that all ink is deposited in the depth of retention, needle depth is more predictable and tattoos heal more solid on all the different types of skin.

Specs:

• 3 Piece Bolt-Up Body
• Blackened Steel Swing Gate Vise that works great with all tubes!
  
• Anodized Black Aluminum Motor Cover and Frame
  
• Deluxe Brass Hardware
• Now with Bowers Brass Weighted Wingnut to balance Clip Cord Pull
  
• Weighing in at a mere 4.65 oz!
• Runs best between 3-6 Volts
• 5mm Stroke
• Pushes any grouping with ease...big stuff, small stuff, no problem
  
• Good with Carts or Needle on Bar
• Lining, Color Packing, Stippling, B&G....it does it all

 

Joshua Bowers Big Can Rotary Tattoo Machine

 
A Few Words From Joshua about this machine:
Super smooth and consistent machine. Powerful through the whole stroke but designed to back off slightly in the middle and back end of the stroke to prevent overworking the skin. Super versatile, great for color saturation, blending, and even black and gray. Plenty of stroke to hang out for nice traditional whips or back it up and increase the voltage for smooth saturation. Has a penetrating stroke down to 4 volts which is great for stippling.

• 3 Piece Bolt-Up Body
• Black Zinc Finish
• Deluxe Brass Hardware
• Now with Bowers Brass Weighted Wingnut for better balance
• Weighing 4.75oz
• Runs best around 7-7.6 Volts
• Pushes any grouping with ease

MADE IN THE USA


Joshua Bowers Big Can Care Instructions

Joshua Bowers Rubber Band Placement Diagram

Joshua Bowers High-Jack

The High-Jack attaches to your workstation magnetically and plugs in to the "machine" port on your power supply effectively moving your clipcord jack 5 feet into the air. This is the ideal position for your clipcord to hang from to keep it off the floor and free from rubbing, tugging, and snagging as you work.

• No more rolling over your cord with your chair
• Keep your cord off the floor
• Reduces the weight hanging off the back of the machine
• Reduces tugs and snags as you tattoo
• Extends the life of your clipcord

A few words from Joshua about The High-Jack:

"The High-Jack is a product I developed to make my clipcord drape and move more easily. The High-Jack magnetically attaches to your work station and plugs in to the Machine port on your power supply. Your clip cord then plugs in to the High-Jack, effectively lifting the clipcord jack 5 feet in to the air. This allows the cord to drape naturally from above you, doesn’t rub on the floor, doesn’t snag across your lap and it takes weight off of the back of the machine easing hand fatigue greatly.

The High-Jack Switch has all the great features of the basic High-Jack with the great new feature of having a switch box at the end to be able to toggle back and forth between two cords. This is a great feature for people using multiple cord types or just want two cords connected so they don’t have to switch cords back and forth. The toggle move from side to side selecting which cord is powered with off in the middle, so you can run on constant and turn your machine off at the High-Jack.

I have been using this product for over a year now, along with the rest of my shop. We were originally just testing them out but I speak for me and the rest of the shop when I say that we can’t imagine tattooing without them now."

Joshua Bowers Micro-Liner Rotary Tattoo Machine

A Few Words From Joshua about this machine:
This machine is designed,built and tuned to run like a coil machine. The tuning is in the frame geometry and setup so there's no knobs or settings to fall out of adjustment. Ready to tattoo out of the box. Light, but not too light. Very punchy and snappy on the tip of the stroke and backs off slightly in the middle of the stroke. Great for sculpting fine finesse lines ran off the needle tips and also great for burying a large grouping liner and pulling a solid single pass lines quickly.

Specs:

• 3 Piece Bolt-Up Body
• Blackened Steel Vise and Spring Shelf
• Anodized Black Aluminum Body
• Deluxe Brass Hardware
• Now with Bowers Brass Weighted Wingnut for better balance
• Weighing in at a mere 3.65 oz!
• Runs best between 6-7 Volts
• Pushes any grouping with ease

Joshua Bowers Micro Liner Care Instructions

Joshua Bowers Rubber Band Placement Diagram

Joshua Bowers SC Bobber

Now with a Swing Gate Vise that works great with all tubes!

A Few Words From Joshua about this machine:
This is a very powerful and capable machine. It has real nice stroke characteristics, nice and snappy with the perfect amount of bog. The best machine if you're wanting to use one machine for lining, shading, or both. Designed for use with cartridges but is equally effective running needle and tube setup. It has a nice snappy powerful stroke that will drop in nice single pass lines with large or small groupings. As a shader, turn the voltage down to slow the speed and still have that punch to drop in solid color or blend with very low trauma.

Specs:

• Precision Machined Aluminum Body with Durable Black Anodize Finish
  
• Blackened Steel Swing Gate Vise that works great with all tubes!
• Deluxe Brass Hardware
• Plus Bowers Heavy Brass Wingnut for improved forward balance to keep the weight over your hand and balance out the pull of your clip cord
  
• Weighing in at a mere 4 oz!
• Operating Range between 4-7 Volts
• Snappy Stroke
• Pushes any grouping with ease
• Great for Lining and Shading
• Needle on Bar or Cartridge Use

Joshua Bowers Micro Liner Care Instructions

Joshua Bowers Rubber Band Placement Diagram