New SOBA V2 Mini Clipper Liner!

New forward weighted version of the Mini Clipper designed and built by SOBA with concept contributions from @destroytroy. These machines go above and beyond, providing both superior balance and performance. Made with a thick aerospace aluminum frame to reduce weight while also minimizing vibration and twang, plus an oversized milled navy brass vise and thumbscrew to keep the majority of weight over the artist's hand reducing clip cord pull and hand fatigue.

- CNC Cut Aerospace Aluminum Frame with thick inlaid yoke for proper conductivity
- Anodized Satin Black Finish
- Raw Brass Vise and Thumbscrew
- Deluxe Brass Hardware plus Custom Blackened Steel Drop Down Rear Binder
- 1" 8 Wrap Custom SOBA Coils
- Great for Medium to Large Groupings
- Medium Speed with a Hard Hit
- Pushing 5's to 14's All Day
- Running 130-135 Hz @ 6.5 V Unloaded
- Weighing in at a total 6.5 ounces with almost half the weight being the vise and thumbscrew
- MADE IN THE USA

Solder Lugs, pack of 10.

Regenerative tattoo film for fresh tattoos

– Waterproof
– Breathable
– Easy to measure and apply
– Perfect for an active lifestyle

This packaging is made out of recycled materials. Please recycle it as well and contribute to a cleaner planet.

Recommended by tattoo professionals worldwide

Tips for Tattoo Film Use:

- For maximum comfort, ensure skin is in a neutral position when applying Tattoo Film. When applying to elbows and knees, the joint should be in a neutral position — neither straight nor completely bent.
- Shave, shave, shave. Peeling Tattoo Film off of hair is unpleasant. Shave the entire area, plus an additional inch all the way around the site of the tattoo.
- Practice before you apply. If it's your first time using Tattoo Film, it may be a little tricky to work with. It doesn't hurt to practice with a small section first, just make sure you shave the area.
- When cutting the bandage for application, remember that rounded corners provide the best adhesion.
- It's okay, when using multiple Tattoo Film bandages, to overlap them by 1/2 inch (1 cm).
- If using a glycerin soap, such as green soap, be sure to rinse thoroughly, as any residue will react with the adhesives and can cause binding and irritation. Avoid loofahs or scratchy wash cloths.

• Black CNC Cut Ductile Iron Base with Swing Gate Vise
• Custom Matte Grape Anodized Aluminum Frame
  
• Deluxe Blackened Hardware
• Custom 1" 8 Wrap Reflective Coils
• Medium Speed with a Solid Hit
• Pushing 5's to 11's no problem
  
• Running 125 Hz @ 6.5 V Unloaded
• Weighs in at 5.65 oz
• MADE IN THE USA

• Black CNC Cut Ductile Iron Base with Swing Gate Vise
• Custom Green Anodized Aluminum Frame with Laser Etched Pot Leaf Pattern
  
• Deluxe Blackened Hardware
• Custom 1" 8 Wrap Reflective Coils
• Medium Speed with a Solid Hit
• Pushing 5's to 9's no problem
  
• Running 135 Hz @ 6.5 V Unloaded
• Weighs in at 5.65 oz
• MADE IN THE USA

• Black CNC Cut Ductile Iron Base with Swing Gate Vise
• Custom Green Anodized Aluminum Frame with Laser Etched Pot Leaf Pattern
  
• Deluxe Blackened Hardware
• Custom 1" 8 Wrap Reflective Coils
• Medium Speed with a Solid Hit
• Pushing 5's to 11's no problem
  
• Running 125 Hz @ 6.5 V Unloaded
• Weighs in at 5.65 oz
• MADE IN THE USA

Special Technique FM Reverse Tetris built specific for doing DOT WORK

- CNC Cut Ductile Iron Adam Ciferri Tetris Frame
- Deluxe Black Finish
- Blackened Hardware
- 1.25" 8 Wrap Custom Coils
- Very Slow Stabby Hit
- Huge 6mm Stroke
- Running 50-55 Hz @ 6.5 V Unloaded
- Adam Ciferri Frame Design, Remixed and Built by Special Technique
- MADE IN THE USA

6 Feet of Blue Tempered Spring Steel. 1/2" or 3/4" wide by .018 thick