BLACK FRIDAY X BLACK NOVEMBER Lightweight Weiner Dog Frame! Special edition frames at special pricing!

Specifications:

• CNC Cut Iron Frame
  
• Designed by Seth Ciferri
  
• Red Oxide Finish
• Geometry for 1" Coils
• Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
  

Made in the USA

BLACK FRIDAY x BLACK NOVEMBER Seth Ciferri Modern Classic Liner/Shader Combo Kit! Special edition run of machines at special pricing!

Seth Ciferri Modern Classic Combo Machine Kit - COMBO Kit includes one frame with geometry to build and setup the machine as either a Liner or Shader. Kit includes both Liner and Shader Armature and Springs. 

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• Lightweight CNC Cut Aluminum Frame
• Highly Durable, Oxidation Resistant Anodized Finish
• Deluxe Blackened Steel Hardware
• Side Facing Guillotine Vise, great for use with Disposable and Steel Tubes
• Inlaid 1/4" Iron Coil Yoke for Better Performance and Less Vibration
  
• 1" 8 Wrap Custom Soldered Coils 
• Armature Bar Included works for Liner and Shader Option
• 2 Liner and Shader Spring Sets
  
• All Screws you'll need PLUS necessary wrenches 
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specs:

• Medium Quick Speed with a Solid Hit
• Running 140-145 Hz at 6V Unloaded
• Pushing 3's to 11's No Problem
• Weighing in at a mere 5.5 ounces!

Typical Shader Specs:

• Medium Speed with a Solid Hit
• Running 105-110 Hz at 6V Unloaded
• Pushing 5's to 11's No Problem
• Weighing in at a mere 5.5 ounces!

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Here are a few words from Seth on the evolution of his "Classic":

 BLACK FRIDAY X BLACK NOVEMBER Juan Puente Liner Kit! Special edition run of machine kits at special pricing!

Kit includes all parts needed to build a great tattoo machine... but it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Juan Puente Frame
• Clear Powder Coat Finish
• Deluxe Blackened Hardware
• Swing Gate Vise Guaranteed to lock tight on any tube
• 1.25" 6 Wrap Custom Soldered Coils
• Liner Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a phillips screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specs:

• Medium Speed with a Solid Hit
• 140-145 Hz at 6.5 V Unloaded
• Pushing 3-11's Easy
• Weighs 7.2 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

 BLACK FRIDAY X BLACK NOVEMBER Juan Puente Shader Kit! Special edition run of machine kits at special pricing!

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Juan Puente Frame
• Clear Powder Coat Finish
• Deluxe Blackened Hardware
• Swing Gate Vise Guaranteed to lock tight on any tube
• 1.25" 8 Wrap Custom Soldered Coils
• Shader Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a Phillips screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Shader Specs:

• Slow Speed with a Solid Hit
• 110-115 Hz at 6 V Unloaded
  
• Pushing up to 13's All Day
• Weighs 7.2 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA

 BLACK FRIDAY X BLACK NOVEMBER Roundback Liner Kit! Special edition run of machines at special pricing!

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Aaron Cain Roundback Liner V2.0

Based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

Highlights:

• CNC Cut Iron Frame
  
• Bead Blast Finish Ready for Paint, Powder, or Plating
• Deluxe Workhorse Blackened Steel Hardware
  
• 1" 8 Wrap Coils

Typical Specifications:

• Quick with a Medium Stroke and a Solid Medium Hit
  
• Running 150-155 Hz @ 6.5 V unloaded
  
• Pushing 3's to 9's with ease
  
• Weighs 6.45 oz
  

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

 BLACK FRIDAY X BLACK NOVEMBER Roundback Shader Kit! Special edition run of machines at special pricing!

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Aaron Cain Roundback Shader V2.0

Based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

Highlights:

• CNC Cut Iron Frame
  
• Bead Blast Finish Ready for Paint, Powder, or Plating
• Deluxe Workhorse Blackened Steel Hardware
  
• 1" 8 Wrap Coils

Specifications:

• Long Stroke with a Medium Hit
  
• Running 100-105 Hz @ 6.5 V unloaded
  
• Pushing 5's to 11's no problem
  
• Weighs 6.45 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Seth Ciferri Micro Jones Liner Kit! Special edition run of machines at special pricing!

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Micro Jones Liner Frame
  
• Bead Blast Finish Ready for any finish 
• Seth Deluxe Blackened Hardware
  
• Seth Side Facing Guillotine Vise
• Deluxe Blackened Hardware
• 1" 8 Wrap Custom Soldered Coils
• Liner Armature Bar
• 2 Spring Sets with each kit
• All Screws you'll need PLUS necessary wrenches (you will need a flat head screwdriver though)
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specs:

•  Medium Quick Speed with a Hard Hit
  
• Running 135-140 Hz @ 6 V Unloaded
  
• Pushing 3's to 14's Easy
  
• Weighs 7.2 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Pilot Machine Kit

Skills and instructions NOT included. Includes everything needed to build a nice tattoo machine...

Components: 

• SOBA’s Pilot frame
• Shaders come with 1 pair of 8 wrap 1.25" coils 
• Liners come with 1 pair of 6 wrap 1.125" coils 
• Appropriate armature bar,
• Front and rear steel binding posts
• Contact screw and all other screws
• All washers including insulators
• Black and magnetic steel shims
• Capacitor
• Cast iron wing nut
• Allen wrench
• 2 sets of fully punched springs. 

Made in the USA

Adam Ciferri Pitbull Liner Kit

Includes everything needed to build a nice tattoo machine...

Components:

• CNC Cut Iron Pitbull Frame
  
• Standard Workhorse Red Oxide Finish on Frame
  
• Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
  
• Armature Bar
• Steel binding posts and Chris Smith copper contact screw 
  
• 2 Spring Sets with each kit
  
• 1.125" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
  
• Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
  
• All Screws you'll need, and some extras. 
  
• Wrenches 
  
• Washer Package including all washers needed... (steel, fiber, and shims)

Made in the USA

Limited Run of Seth Ciferri Version 2 Weiner Dog Machine Kits

Includes everything needed to build a nice tattoo machine...

Components:

• CNC Cut Iron Weiner Dog V2 Frame
  
• Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
  
• Standard Workhorse Red Oxide Finish on Frame
  
• Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
  
• Armature Bar (liner or shader, depends on what you order) 
  
• Steel binding posts and Chris Smith copper contact screw 
  
• 2 Spring Sets with each kit
  
• 1" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
  
• Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
  
• All Screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
• Wrenches (since the kit utilizes TORX screws, including the T25 and T15 wrenches needed to handle them.) 
  
• Washer Package including all washers needed... (steel, fiber, and shims)

NOTE: I cannot and will not be available to offer ANY building or tuning advice for these kits. these include all of the same parts I use to build my production machines, and the quality is above and beyond anything I've used or offered in the past.

We are proud to say that all parts are made in the USA.
Thanks, good luck, and have fun with your new project!

Seth C.

The official Seth Ciferri "build it your fucking self" tattoo machine kit.

Includes everything needed to build a nice tattoo machine... (mojo not included)

Components:

• New "fastback" walker-style frame in iron - liner or shader. these new castings feature improved geometry, tighter tolerances, a more user-friendly surface finish, and nice big "PDX,OR" (Portland Oregon, for those who don't know) cast on the interior of the frame upright; to let folks know it's the real deal, and from whence it came... 
  
• Coil set with capacitor and lugs - (iron liners come with 1.25" 6 wrap. iron shaders come with 1.25" 8 wrap.) 
  
• Armature bar (liner or shader, depends on what you order) 
  
• Spring set 
  
• All screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
  
• Insulator package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
  
• Our beautiful new steel binding posts and Chris Smith copper contact screw. (exclusive to us. unavailable from any other builder or supplier) 
  
• Washer package - includes all washers needed... (black, fiber, shims, and lock) 
  
• Wrenches (since the kit utilizes TORX screws, including the T25 and T15 wrenches needed to handle them.) 
  
• Full guarantee on the quality of all parts

NOTE: I cannot and will not be available to offer ANY building or tuning advice for these kits. These include all of the same parts I use to build my production machines, and the quality is above and beyond anything I've used or offered in the past.

We are proud to say that all parts are made in the USA.
Thanks, good luck, and have fun with your new project!
Seth C.

Workhorse A1 Slideback Tattoo Machine Frame

Components:

• CNC Cut Iron Frame
  
• Designed by Mike Pike, modeled off a classic A1 Tattoo Machine
  
• Raw Finish ready for paint, powder coat, plating or oxide
  
• Geometry for 1.25" Coil Liner or Shader
  
• Swing Gate Vise with extra screws to work with 1.25" coils or with a yoke and 1" coils
  
• Weighs 2.8 oz

*Frame and Swing Gate Vise parts only, no other parts or tools included.

Made in the USA

Never before offered Zephyr Combo Tattoo Machine Kits, plus optional armature bar fixture!

Cory Rogers Zephyr Machine Kit - COMBO Kit includes one full size frame with geometry to build and setup the machine as either a Liner or Shader. Kit includes both Liner and Shader Armatures and Springs. 

Includes everything needed to build a nice tattoo machine... *

Components:

• CNC Cut Full Size Iron Zephyr Frame
• Blackened Finish
• Deluxe Blackened Hardware
• 1" 8 Wrap Custom Soldered Coils plus 1/4" Yoke
  
• Liner and Shader Armature Bar Included 
  
• 2 Liner and Shader Spring Sets
  
• All Screws you'll need PLUS necessary wrenches 
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specifications:

• Medium Fast Speed with a Solid Hit
• Great Liner for Traditional Work
• 135-140Hz. @ 6.5 V unloaded
• Pushes 5s to 11s Easy
• Weighs 6.75 oz

Typical Shader Specifications:

• Slow Speed with a Hard Hit and Long Stroke
  
• Great Shader for Traditional Work
• 100-105 Hz. @ 6.5 V unloaded
• Pushes 5s to 15s Easy
• Weighs 6.75 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Mike Pike x Ernie Carafa Cast Iron FRAME

Very special collaborative frame designed and cast in Iron by Mike Pike and Ernie Carafa years ago, recently found and pulled from rusty buckets, cleaned up, cnc milled with collet vises brazed in. These are very limited and once they are gone they will forever be gone. 

Frame Specs:

• Cast Iron Frame
• Raw Oiled Finish
• Brazed Collet Vise
• Forward facing wingnut that won't ride your hand or get in the way
• Welded Cast Iron Wingnut Thumbscrew Included

Typical Machine Specs:

• Typically Built as a Long Stroke Liner....can be built as a Shader or Hybrid as well
• Slow Speed with a Solid Hit
• Running 125-130 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 11s

As described by Mike Pike:

”I think it was around 2003 or 2004 Ernie wanted to make up some of these cast frames he made up a drawing and a buddy of mine that worked at the foundry in downtown LA made the match plate. Ernie was a good guy, and it was kind of like a tribute to him. It literally took forever for the guy to get the frames done and then milling was going to be done by another guy that had all the Frames but ended up passing away and then I mailed some in the garage and Ernie milled some and we built them up. He wanted to make he wanted to make the castings kind of thick to where they could be mailed to take any size coil and have a lot less draft angle than the ones that he did with Paul Rogers”

Made in the USA by Mike Pike

Seth Ciferri Mini Flatside Frame

Specifications:

• CNC Cut Iron Liner Frame
  
• Designed by Seth Ciferri
  
• Black Oxide Finish
• Geometry for 1" Coils
• Forward Facing Guillotine Vise
  
• Vise Parts Included
• Weighs 2.9 oz

Made in the USA