Seth Ciferri Lightweight Weiner Dog Liner Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron LW Weiner Dog Frame
• Lightweight V2.1 Wiener Dog weighs in at a mere 5.5oz fully built
• Gloss Black Powder Coat Finish
• Deluxe Blackened Hardware
  
• 1" 8 Wrap Soldered Coils
• Long Nipple Liner Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a phillips screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specs:

• Medium Speed with a Hard Hit To push Larger Groupings
• Running 130-135 Hz @ 6 V Unloaded
  
• Pushing Loose 5's to Loose 11's Easy

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Seth Ciferri Lightweight Weiner Dog Shader Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron LW Weiner Dog Frame
• Lightweight V2.1 Wiener Dog weighs in at a mere 5.5oz fully built
• Gloss Black Powder Coat Finish
• Deluxe Blackened Hardware
  
• 1" 8 Wrap Soldered Coils
• Long Shader Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a phillips screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Shader Specs:

• Medium Speed with a Hard Hit 
  
• Great For Color Packing and Whip Shading
  
• Running 100-105 Hz @ 6 V Unloaded
  
• Pushing 7's-13's All Day

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Special Edition Mike Pike Tattoo Machine Kits, plus optional armature bar fixture and alignment tool!

This is a special limited edition run of Mike Pike's Half Cup Machine Kits! 

Kit includes all parts needed to build a great tattoo machine...however it does not include the skills to build a great tattoo machine, sorry not sorry :)

Included Components: 

• CNC Cut Iron Pike Half Cup Frame, the mini version of the famous full size Mike Pike Teacup frame
• Raw Finish Ready for paint, powder coat, oxide, or torch finish
• Deluxe Workhorse Blackened Hardware
• Armature Bar
• Steel binding posts
  
• 2 Spring Sets with each kit
  
• 1" 8 Wrap Soldered Workhorse Coils 
  
• All Screws you'll need PLUS necessary wrenches
  
• Washer Package including all washers needed... (steel, fiber, and shims)

Typical Half Cup Liner Specifications:

• Liners are Very Quick with a Medium Hit
  
• Running 145-155Hz @ 6.5 V unloaded
  
• Pushing 3's-9's Easy
  
• Weighs 6.5 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, as it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Special Edition Mike Pike Tattoo Machine Kits, plus optional armature bar fixture and alignment tool!

This is a special limited edition run of Mike Pike's Half Cup Machine Kits! 

Kit includes all parts needed to build a great tattoo machine...however it does not include the skills to build a great tattoo machine, sorry not sorry :)

Included Components:

• CNC Cut Iron Pike Half Cup Frame, the mini version of the famous full size Mike Pike Teacup frame
  
• Raw Finish Ready for paint, powder coat, oxide, or torch finish
  
• Deluxe Workhorse Blackened Hardware
  
• Armature Bar 
  
• Steel binding posts
  
• 2 Spring Sets with each kit
  
• 1" 8 Wrap Soldered Workhorse Coils 
  
• All Screws you'll need PLUS necessary wrenches
  
• Washer Package including all washers needed... (steel, fiber, and shims)

Typical Half Cup Shader Specifications:

• Shaders are Quick with a Hard Hit
  
• Running 100-105 Hz @ 6.5V unloaded
  
• Pushing 7's-15's Easy
  
• Weighs 6.5 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, as it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Highlights:

• CNC Cut Iron Micro Jones Shader Frame
  
• Bead Blast Finish Ready for any finish 
• Seth Deluxe Blackened Hardware
  
• Seth Side Facing Guillotine Vise
• Deluxe Blackened Hardware
• 1" 8 Wrap Custom Soldered Coils
• Liner Armature Bar
• 2 Spring Sets with each kit
• All Screws you'll need PLUS necessary wrenches (you will need a flat head screwdriver though)
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Shader Specs:

• Medium Slow Speed with a Hard Hit
  
• Running 100-105 Hz @ 6 V Unloaded
  
• Pushing 5's to 15's All Day
  
• Weighs 7.2 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• Full Size Frame milled in house from a solid block of Ductile Iron
• HD Flat Black Powder Coat Finish
• Deluxe Workhorse Hardware with Black Oxide Finish
• Swing Gate Steel Vise
• Custom 6 Wrap 1.25" Coils
• High End Specialty Steel Springs
• Solid Copper Contact
• Reverse Rear Binder Setup with frame ground on coil deck

Typical Liner Specs:

• Long Stroke with a solid hit great for 5s to 14s
  
• Medium Speed, running around 135-140 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• Full Size Frame milled in house from a solid block of Ductile Iron
• HD Flat Black Powder Coat Finish
• Deluxe Workhorse Hardware with Black Oxide Finish
• Swing Gate Steel Vise
• Custom 8 Wrap 1.25" Coils
  
• High End Specialty Steel Springs
• Solid Copper Contact 
• Reverse Rear Binder Setup with frame ground on coil deck

Typical Shader Specs:

• Long Stroke with a solid hit great for 5s to 15s
  
• Medium Speed, running around 105-110 unloaded @ 6.5 Volts
• 6.5 Ounce Weight
• Made in the USA

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron V2.2 Weiner Dog Liner Frame
  
• Light Pink HD Powder Coat Finish
• Deluxe Blackened Hardware
  
• Swing-Gate Vise Guaranteed to Lock Tight on Any Tube
  
• Deluxe Blackened Hardware
• 1" 8 Wrap Custom SOLDERED Coils
• Long Nipple Liner Armature Bar + O-Ring Spacers 
• 2 Spring Sets with each kit
• All Screws you'll need PLUS necessary wrenches (you will need a flat head screwdriver though)
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specs:

• Medium Speed with a Hard Hit To push Larger Groupings
  
• Running 130-135 Hz @ 6 V Unloaded
  
• Pushing Loose 5's to 14's Easy
  
• Weighs 5.95 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron V2.2 Weiner Dog Shader Frame
  
• Light Pink HD Powder Coat Finish
• Deluxe Blackened Hardware
  
• Swing-Gate Vise Guaranteed to Lock Tight on Any Tube
  
• Deluxe Blackened Hardware
• 1" 8 Wrap Custom SOLDERED Coils
• Long Nipple Liner Armature Bar + O-Ring Spacers 
• 2 Spring Sets with each kit
• All Screws you'll need PLUS necessary wrenches (you will need a flat head screwdriver though)
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Shader Specs:

• Medium Speed with a Hard Hit 
  
• Great For Color Packing and Whip Shading
  
• Running 100-105 Hz @ 6 V Unloaded
  
• Pushing 5's-15's All Day
  
• Weighs 5.95 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

This machine kit comes with parts to build as either a liner or a shader. Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Ductile Iron Frame 
  
• Drilled Out and Lightened Upright 
  
• Swing Gate Vise with and Internal Spring for ease of use
  
• Custom Bead Blast Raw Frame Ready for Any Finish
• Custom Deluxe Blackened Hardware
• 1" 8 Wrap Custom SOLDERED Coils
• Liner and Shader Armature Bar
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)

Typical LINER Specifications:

• Medium Speed with a Solid Hit
• Great for Smaller to Medium Sized Groupings
  
• Pushing 3's to 9's easy, turn up a little for 11's
  
• Running 140-145 Hz @ 6.5 V Unloaded
  
• Weighs 6.8 oz

Typical SHADER Specifications:

• Medium Speed with a Solid Hit 
  
• Great for Quick Color Packing, turn down and it back off nice for Blends / B&G
  
• Pushing 5's to 11's easy, turn up a little for 13's
  
• Running 110-115 Hz @ 6.5 V Unloaded
  
• Weighs 6.8 oz

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Adam Ciferri Bulldog Shader Kit

Includes everything* needed to build a nice tattoo machine...

Components:

• CNC Cut Sandcast Ductile Iron Bulldog Frame
• Bead Blast Finish, Ready for Paint, Powder, or Plating
• Deluxe Blackened Hardware
• 1.25" 8 Wrap Custom Soldered Coils with 47 Cap
• Long Nipple Armature Bar
• 2 Spring Sets with each kit
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included

Adam's Machine Setup:

• Tuned for all-day, every-day street shop and/or custom tattooing
• Solid hit that easily pushes 5-15 Mag Groupings
• Runs 95-105Hz @ 6.5 Volts Unloaded
  
  

*Includes all the tools you need to build the machine except an Armature Bar Fixture. We highly recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness. You can find one here in our Tool Category 

Made in the USA.

A few words from Adam on his history with this machine:
"In 1996 I started making machines known as "Bulldogs" with Mike Malone, as the previous builder of this classic machine had ceased making them, and there was a void to be filled. The idea for this was mine, and I ran it by Mike. He had asked me to build shaders for him to re-sell, as he was happy building liners and didn't feel much of an affinity for building shaders.

So, we embarked on our plan to start re-making the shader known as "the bulldog" and it was to be a partnership. Our partnership, like so many, had some snags, and in our haste to get the project rolling, we never nailed down some key details of the partnership. Predictably, we both made some serious mistakes, both professionally, and privately, and these mistakes ultimately led to some interesting interpretations and speculations of what my role was in making this machine.

I do not claim to own anything surrounding this machine but my work and my word.
I have made this machine, continually for nearly 30 years, and intend to continue making this machine for as long as this demand dictates.

Thank you, Workhorse Irons, for making this project happen, thank you Mike Malone for the opportunity to have a part in the lineage of this machine, and thank you, Fellow Tattooers, who buy my machines and allow me to do what I love."
Respectfully, Adam C

Seth Ciferri Modern Classic Combo Machine Kit - COMBO Kit includes one frame with geometry to build and setup the machine as either a Liner or Shader. Kit includes both Liner and Shader Armature and Springs. 

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• Lightweight CNC Cut Aluminum Frame
• Highly Durable, Oxidation Resistant Anodized Finish
• Deluxe Blackened Steel Hardware
• Side Facing Guillotine Vise, great for use with Disposable and Steel Tubes
• Inlaid 1/4" Iron Coil Yoke for Better Performance and Less Vibration
  
• 1" 8 Wrap Custom Soldered Coils 
• Armature Bar Included works for Liner and Shader Option
• 2 Liner and Shader Spring Sets
  
• All Screws you'll need PLUS necessary wrenches 
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specs:

• Medium Quick Speed with a Solid Hit
• Running 140-145 Hz at 6V Unloaded
• Pushing 3's to 11's No Problem
• Weighing in at a mere 5.5 ounces!

Typical Shader Specs:

• Medium Speed with a Solid Hit
• Running 105-110 Hz at 6V Unloaded
• Pushing 5's to 11's No Problem
• Weighing in at a mere 5.5 ounces!

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Here are a few words from Seth on the evolution of his "Classic":

Kit includes all parts needed to build a great tattoo machine... but it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Juan Puente Frame
• Clear Powder Coat Finish
• Deluxe Blackened Hardware
• Swing Gate Vise Guaranteed to lock tight on any tube
• 1.25" 6 Wrap Custom Soldered Coils
• Liner Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a phillips screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Liner Specs:

• Medium Speed with a Solid Hit
• 140-145 Hz at 6.5 V Unloaded
• Pushing 3-11's Easy
• Weighs 7.2 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Components:

• CNC Cut Iron Juan Puente Frame
• Clear Powder Coat Finish
• Deluxe Blackened Hardware
• Swing Gate Vise Guaranteed to lock tight on any tube
• 1.25" 8 Wrap Custom Soldered Coils
• Shader Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a Phillips screwdriver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Typical Shader Specs:

• Slow Speed with a Solid Hit
• 110-115 Hz at 6 V Unloaded
  
• Pushing up to 13's All Day
• Weighs 7.2 oz

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

Aaron Cain Roundback Liner V2.0

Based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

Highlights:

• CNC Cut Iron Frame
  
• Bead Blast Finish Ready for Paint, Powder, or Plating
• Deluxe Workhorse Blackened Steel Hardware
  
• 1" 8 Wrap Coils

Typical Specifications:

• Quick with a Medium Stroke and a Solid Medium Hit
  
• Running 150-155 Hz @ 6.5 V unloaded
  
• Pushing 3's to 9's with ease
  
• Weighs 6.45 oz
  

*Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.