Limited Mike Pike x Destroy Troy Teacup Liner - Pink x Black

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Blackened Destroy Troy Warp Drive Cray Bar
  
• Custom 1.125" 7 Wrap Coils
  
• Black Anodized Aluminum Frame
• Blackened Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Deluxe Blackened Hardware
  
• Blackened Spring Shelf Yoke for Superior Connectivity
  
• Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running  around 135 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

Not typically offered special edition Mike Pike Tattoo Machine Kits, plus optional armature bar fixture and alignment tool!

Special Limited Edition run of Mike Pike Half Cup Machine Kits!

Kit includes all parts needed to build a great tattoo machine...however it does not include the skills to build a great tattoo machine, sorry not sorry :)

- CNC Cut Iron Pike Half Cup Frame, the mini version of the famous full size Mike Pike Teacup frame
- Raw Finish Ready for paint, powder coat, oxide, or torch finish
- Deluxe Workhorse Blackened Hardware
- Armature Bar
- Steel binding posts
- 2 Spring Sets with each kit
- 1" 8 Wrap Soldered Workhorse Coils 
- All Screws you'll need PLUS necessary wrenches
- Washer Package including all washers needed... (steel, fiber, and shims)

Liner typical specs:

- Liners are Very Quick with a Medium Hit
- Running 145-155Hz @ 6.5 V Unloaded
- Pushing 3's-9's Easy
- Weighing a Mere 6.5 Oz

Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Not typically offered special edition Mike Pike Tattoo Machine Kits, plus optional armature bar fixture and alignment tool!

Special Limited Edition run of Mike Pike Half Cup Machine Kits!

Kit includes all parts needed to build a great tattoo machine...however it does not include the skills to build a great tattoo machine, sorry not sorry :)

- CNC Cut Iron Pike Half Cup Frame, the mini version of the famous full size Mike Pike Teacup frame
- Raw Finish Ready for paint, powder coat, oxide, or torch finish
- Deluxe Workhorse Blackened Hardware
- Armature Bar
- Steel binding posts
- 2 Spring Sets with each kit
- 1" 8 Wrap Soldered Workhorse Coils 
- All Screws you'll need PLUS necessary wrenches
- Washer Package including all washers needed... (steel, fiber, and shims)

Shader typical specs:

- Shaders are Quick with a Hard Hit
- Running 100-105 Hz @ 6.5V Unloaded
- Pushing 7's-15's Easy
- Weighing a Mere 6.5 Oz

Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Limited Mike Pike x Cory Rogers Linear Rotary!

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Here are the specifics:

• Precision milled high-grade Aerospace Aluminum body
  
• Custom Black Anodized Components and Black Rainbow Powder Coated Frame
  
• Custom Pike Rogers Etching on the rear cap
  
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Made with love in the USA by real tattooers Mike Pike and Cory Rogers.

Thanks and enjoy,
Mike & Cory

Mike Pike x Destroy Troy Jonesy Liner

These are the second special collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, originally the Jonesy was going to be their first collaborative machines, but the Teacups jumped in first while we dialed in these Jonesy machines. Now after many frame adjustments, tweaks and updates, they have evolved and improved, and we couldn't be happier with the result. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Lightweight Olive Green Anodized Aluminum Modified Jonesy Base with various updates to help with overall long-term strength and vibration reduction
• Black Oxided Extra Chunky Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Black Oxided Deluxe Hardware
  
• Blackened Destroy Troy Cray Bar
  
• Custom 8 Wrap Matching Reflective Coils
  
• Ugly Green HD Powder Coat Brass Jonesy Upright
  

Specifications:

• Medium Speed with a Solid Hit
• Running 140-145 Hz Unloaded at 6V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

New Mike Pike PMA Direct Drive Rotary!

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guarantee to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

- Limited Edition Run of Chartreuse Powder Coated Bodies with Blackened Motor Cap, Swing Gate Vise, and Hardware.
-High-grade Aluminum body precision milled frames and components
- Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
- Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
- Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy
- Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
- Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
- Lightweight weighing in at a mere 4.5 oz
- Clipcord Connection

Made with love in the USA by Mike Pike and his 40+ years of experience tattooing and building machines.

Thanks and enjoy,
Mike Pike

Limited Aaron Cain x Mike Pike x Destroy Troy BIOMECH Teacup Liner 

Very limited special edition collaborative machines by Aaron Cain, Mike Pike, and Destroy Troy! Pike and Destroy Troy have been making limited batches of these Teacups for a while now dialing them in to be well balanced, great running machines. Now we are able to add one more collaborator to this special edition Teacup with Aaron Cain's famous biomech carving, making this a truly epic version of these machines. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Aaron Cain Fully Meched Frame, Vise, Hardware, and Custom Coils!!
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Blackened Destroy Troy Warp Drive Cray Bar
  
• Custom 8 1.125" Coils 
  
• Raw Finish Aluminum Frame with Blackened Biomech details 
  
• Blackened Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Blackened Biomech Hardware
  
• Blackened Spring Shelf Yoke for Superior Connectivity
• Custom Aaron Cain Contact Screw
  
• Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running  around 135 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

Limited Edition of only 2 Liners! $1200 Each. 

Mike Pike x Ernie Carafa Cast Iron FRAME

Very special collaborative frame designed and cast in Iron by Mike Pike and Ernie Carafa years ago, recently found and pulled from rusty buckets, cleaned up, cnc milled with collet vises brazed in.

These are very limited and once they are gone they will forever be gone. 

As described by Mike Pike:

”I think it was around 2003 or 2004 Ernie wanted to make up some of these cast frames he made up a drawing and a buddy of mine that worked at the foundry in downtown LA made the match plate . Ernie was a good guy, and it was kind of like a tribute to him. It literally took forever for the guy to get the frames done and then milling was going to be done by another guy that had all the Frames but ended up passing away and then I mailed some in the garage and Ernie milled some and we built them up . He wanted to make he wanted to make the castings kind of thick to where they could be mailed to take any size coil and have a lot less draft angle than the ones that he did with Paul Rogers”

Frame Specs:

• Cast Iron Frame
• Raw Oiled Finish
• Brazed Collet Vise
• Forward facing wingnut that won't ride your hand or get in the way
• Welded Cast Iron Wingnut Thumbscrew Included

Typical Machine Specs when built by Mike Pike:

• Typically Built as a Long Stroke Liner....can be built as a Shader or Hybrid as well
• Slow Speed with a Solid Hit
• Running 125-130 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 11s

Made in the USA by Mike Pike

New Mike Pike Smith & Howard Liner!

Milled with updated Mike Pike geometry in the shape of what is traditionally referred to as a Blackie frame for it's association with the tattoo artist Brooklyn Blackie. Many are under the presumption he was the originator of this design, but this frame shape was originally made by Smith & Howard Tattoo Supply in the early 1900s. 

• Mini Pike S&H Frame CNC Cut from Iron Bars
• HD Powder Coat Pink x Black Faded Finish
• Deluxe Workhorse Blackened Hardware
• Long Fluted Armature Speed Bar
• Blackened Steel binding posts
• 1" 8 Wrap Custom Coils
• Medium Speed with a Long Stroke and Solid Hit
• Running 130-135 Hz Unloaded at 6.5 Volts
• Great for use with 5s to 11s
• Made in the USA by Mike Pike
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in the way
• 6.4 ounce weight

Limited Mike Pike x Destroy Troy Teacup Liner 

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• 24k Gold Plated Destroy Troy Warp Drive Cray Bar
  
• Custom 1.125" 8 Wrap Pink Scale Coils 
  
• Bright Purple Anodized Aluminum Frame
• Blackened Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Deluxe 24k Gold Plated Hardware
  
• Blackened Spring Shelf Yoke for Superior Connectivity
• Deluxe 24k Gold Plated Copper Contact Screw
  
• Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running  around 135 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

Limited Mike Pike x Cory Rogers Linear Rotary!

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Here are the specifics:

• High-grade Aluminum body precision milled
• Custom Purple Anodized Parts
• Rainbow Sparkle HD Powder Coated Frame
  
• Blackened Deluxe Binders and Cast Iron Wingnut
• Custom Laser Etched OM Mandala 
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining

• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Made with love in the USA by real tattooers Mike Pike and Cory Rogers.

Thanks and enjoy,
Mike & Cory

New Mike Pike PMA Direct Drive Rotary!

After a couple years of minor tweaks and lots of testing, the new Mike Pike Direct Drive Rotary is finally ready! Not necessarily a reinvention of the wheel, but applying his years of knowledge tattooing and building rotary machines, Pike dialed in these Direct Drives and simply made a great running Rotary.

Built using only the finest components to produce a great all around direct drive that is smooth running, consistent, and rock solid for years of trouble free use. Made with powerful high end motors, an adjustable Cam to accommodate any stroke, vertical swing gate vise guarantee to grip tubes with no issue, and top of the line aluminum that is both lightweight and strong enough to stand the test of time.

- Limited Edition Run of Electric Blue Anodized Aluminum Frames PLUS 24k Gold Plated Motor Cap, Swing Gate Vise, and Hardware.
-High-grade Aluminum body precision milled frames and components
- Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
- Comfortable and well balanced with a vertical swing gate tube vice that will bite and hold all disposable and stainless tubes
- Adjustable Brass Cam with PMA reference marks to help keep track of stroke settings and adjustments. Simply loosen the cam set screw, pull out the inner cam and insert it back in at either a shorter or longer setting to change the stroke quick and easy
- Pushes up to 25 mag and up to 18 Rounds no problem, Needle on Bar or Cartridges
- Runs best anywhere between 5 and 10 volts depending on what you are pushing and how you are tattooing
- Lightweight weighing in at a mere 4.5 oz
- Clipcord Connection

Made with love in the USA by Mike Pike and his 40+ years of experience tattooing and building machines.

Thanks and enjoy,
Mike Pike

• Precision milled high-grade Aerospace Aluminum body
  
• Custom French Rose Anodized Parts and Frame, plus Nickel Plated Deluxe Binders and Cast Iron Wingnut
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Limited Mike Pike x Cory Rogers Linear Rotary!

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Here are the specifics:

• Precision milled high-grade Aerospace Aluminum body
  
• Custom Black Anodized Components and Illusion Pink Powder Coated Frame
  
• Custom Pike Rogers Etching on the rear cap
  
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Made with love in the USA by real tattooers Mike Pike and Cory Rogers.

Thanks and enjoy,
Mike & Cory

Limited Mike Pike x Destroy Troy Teacup Liner - Mermaid Candy x Black

Special limited edition collaborative machines by Mike Pike and Destroy Troy! This has been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aluminum Teacup Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• Blackened Destroy Troy Warp Drive Cray Bar
  
• Custom 1.125" 8 Wrap Coils
  
• Plateau Green Powder Coated Aluminum Frame
• Candy Raspberry Pink Powder Coated Steel Destroy Troy Forward-Weighted Guillotine Vise
  
• Deluxe Blackened Hardware
  
• Blackened Spring Shelf Yoke for Superior Connectivity
• Pure Copper Contact Screw
  
• Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running  around 135 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA