Limited Run of Seth Ciferri Version 2 Weiner Dog Machine Kits

Includes everything needed to build a nice tattoo machine...

- CNC Cut Iron Weiner Dog V2 Frame
- Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
- Standard Workhorse Red Oxide Finish on Frame
- Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
- Armature Bar (liner or shader, depends on what you order)
- Steel binding posts and Chris Smith copper contact screw
- 2 Spring Sets with each kit
- 1" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
- Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
- All Screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
- Wrenches (since the kit utilizes TORX screws, i'm including the T25 and T15 wrenches needed to handle them.)
- Washer Package including all washers needed... (steel, fiber, and shims)

*Currently Boxed in Workhorse Boxes - we are out of the fancy ones in the pic, sorry!!

*NOTE: i cannot, and will not be available to offer ANY building or tuning advice for these kits. these include all of the same parts i use to build my production machines, and the quality is above and beyond anything i've used or offered in the past.

and we are proud to say that all parts are made in the USA.

thanks, good luck, and have fun with your new project!

seth c.

The official Seth Ciferri "build it your fucking self" tattoo machine kit.

Includes everything needed to build a nice tattoo machine... (mojo not included)

• new "fastback" walker-style frame in iron - liner or shader. these new castings feature improved geometry, tighter tolerances, a more user-friendly surface finish, and nice big "PDX,OR" (portland oregon, for those who dont know) cast on the interior of the frame upright, to let folks know it's the real deal, and from whence it came...
• coil set with capacitor and lugs - (iron liners come with 1.25" 6 wrap. iron shaders come with 1.25" 8 wrap.)
• armature bar (liner or shader, depends on what you order)
• spring set
• all screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
• insulator package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
• our beautiful new steel binding posts and Chris Smith copper contact screw. (exclusive to us. unavailable from any other builder or supplier)
• washer package - includes all washers needed... (black, fiber, shims, and lock)
• wrenches (since the kit utilizes TORX screws, i'm including the T25 and T15 wrenches needed to handle them.)
• full guarantee on the quality of all parts

*Currently Boxed in Workhorse Boxes - we are out of the fancy ones in the pic, sorry!!

*NOTE: i cannot, and will not be available to offer ANY building or tuning advice for these kits. these include all of the same parts i use to build my production machines, and the quality is above and beyond anything i've used or offered in the past.

we are proud to say that all parts are made in the USA, the majority of which being made right here in Portland, Oregon.

thanks, good luck, and have fun with your new project!

seth c.

Limited Deluxe Seth Ciferri Mini Flatside Liner Kits!

Kit includes all parts needed to build a great tattoo machine...but it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut ALUMINUM Mini Flastside Frame
• Black Anodized Finish
• Deluxe Blackened Hardware
• Front Loading Guillotine Vise
• 1" 8 Wrap Custom Soldered Coils
• Armature Bar
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
  
• Weighs 6 oz

Liner typical specs:

• Medium Slow Speed with a Medium Hard Hit
• Running 130-135 Hz @ 6 V Unloaded
• Pushing 5's to 11's No Problem

Shader typical specs:

• Medium Speed with a Hard Hit
• Running 105-110 Hz @ 6 V Unloaded
• Pushing up to 13's Easy

Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Limited Deluxe Seth Ciferri Mini Fastback Liner/Shader Kits!

This machine kit comes with parts to build as either a liner or a shader. Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Iron Mini Fastback Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• Spring Loaded Swing Gate Vise
• 1" 8 Wrap Custom Soldered Coils
• Liner and Shader Armature Bar
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included
• Weighs 7.2 oz

Liner typical specs:

• Medium Slow Speed with a Medium Hard Hit
• Running 125-130 Hz @ 6 V Unloaded
• Pushing 5's to 11's No Problem

Shader typical specs:

• Medium Speed with a Hard Hit
• Running 105-110 Hz @ 6 V Unloaded
• Pushing up to 13's Easy

Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Limited Deluxe Seth Ciferri Mini Flatside Liner/Shader Kits!

This machine kit comes with parts to build as either a liner or a shader. Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut ALUMINUM Mini Flastside Frame
• Lightly Distressed Black Zinc Finish
• Deluxe Blackened Hardware
• Front Loading Guillotine Vise
• 1" 8 Wrap Custom Soldered Coils
• Liner and Shader Armature Bar
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included
• Weighs 6 oz

Liner typical specs:

• Medium Slow Speed with a Medium Hard Hit
• Running 130-135 Hz @ 6 V Unloaded
• Pushing 5's to 11's No Problem

Shader typical specs:

• Medium Speed with a Hard Hit
• Running 105-110 Hz @ 6 V Unloaded
• Pushing up to 13's Easy

Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Not typically offered special edition Seth Ciferri Tattoo Machine Kits, plus optional armature bar fixture and alignment tool!

Seth Ciferri Lightweight Weiner Dog Liner Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Iron LW Weiner Dog Frame
• Lightweight V2.1 Wiener Dog weighs in at a mere 5.5oz fully built
• Gloss Black Powder Coat Finish
• Deluxe Blackened Hardware
  
• 1" 8 Wrap Soldered Coils
• Long Nipple Liner Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a phillips screw driver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Liner typical specs:

- Medium Speed with a Hard Hit To push Larger Groupings
- Running 130-135 Hz @ 6 V Unloaded
- Pushing Loose 5's to Loose 11's Easy

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

 Not typically offered special edition Seth Ciferri Tattoo Machine Kits, plus optional armature bar fixture and alignment tool!

Seth Ciferri Lightweight Weiner Dog Shader Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Iron LW Weiner Dog Frame
• Lightweight V2.1 Wiener Dog weighs in at a mere 5.5oz fully built
• Gloss Black Powder Coat Finish
• Deluxe Blackened Hardware
  
• 1" 8 Wrap Soldered Coils
• Long Shader Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a phillips screw driver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)

Shader typical specs:

- Medium Speed with a Hard Hit
- Great For Color Packing and Whip Shading
- Running 100-105 Hz @ 6 V Unloaded
- Pushing 7's-13's All Day

*Comes with or without our Armature Bar Fixture and Alignment Tool. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.