Adam Ciferri Pitbull Liner Kit

Includes everything needed to build a nice tattoo machine...

- CNC Cut Iron Pitbull Frame
- Standard Workhorse Red Oxide Finish on Frame
- Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
- Armature Bar
- Steel binding posts and Chris Smith copper contact screw
- 2 Spring Sets with each kit
- 1.125" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
- Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
- All Screws you'll need, and some extras. 
- Wrenches
- Washer Package including all washers needed... (steel, fiber, and shims)

**Lock-down machines from Canada now available at a discounted price!

We closed our Canadian branch early on during the extended lock-downs in Canada and we were unable to retrieve them or cross the border until recently. These are all brand new machines, they have just been sitting boxed up in Canada since the early days of Covid in 2020. They are dated 2018/2019 and run as they should with no wear or corrosion. Sales are final, but warranties still do apply.

Deluxe Pilot Kit - NOW IN BRASS

Kit includes all parts needed to build a nice tattoo machine...it does not however include the skills to build a nice tattoo machine, sorry.

- Cast BRASS Pilot Frame
- Raw Brass Finish on Frame
- Workhorse Blackened Hardware
- Armature Bar
- Steel binding posts and standard contact screw
- 2 Spring Sets with each kit
- 1.125" 6 Wrap Workhorse Coils for Liners or 1.125" 8 Wrap for Shaders, plus Capacitor Kit
- All Screws you'll need
- Washer Package including all washers needed... (steel, fiber, and shims)

*Picture is of the liner kit, the shader kit will come with appropriate hardware, coils and springs.

Kit Includes: SOBA’s Pilot frame, Shaders come with 1 pair of 8 wrap 1.25" coils and Liners come with 1 pair of 6 wrap 1.125" coils , appropriate armature bar, front and rear steel binding posts, contact screw, all washers including insulators, black, and magnetic steel shims, all screws, capacitor, cast iron wing nut, Allen wrench, and 2 sets of fully punched springs. Essentially everything needed to assemble a complete machine. Skills and instructions NOT included. MADE IN THE USA.

The official Seth Ciferri "build it your fucking self" tattoo machine kit.

Includes everything needed to build a nice tattoo machine... (mojo not included)

• new "fastback" walker-style frame in iron - liner or shader. these new castings feature improved geometry, tighter tolerances, a more user-friendly surface finish, and nice big "PDX,OR" (portland oregon, for those who dont know) cast on the interior of the frame upright, to let folks know it's the real deal, and from whence it came...
• coil set with capacitor and lugs - (iron liners come with 1.25" 6 wrap. iron shaders come with 1.25" 8 wrap.)
• armature bar (liner or shader, depends on what you order)
• spring set
• all screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
• insulator package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
• our beautiful new steel binding posts and Chris Smith copper contact screw. (exclusive to us. unavailable from any other builder or supplier)
• washer package - includes all washers needed... (black, fiber, shims, and lock)
• wrenches (since the kit utilizes TORX screws, i'm including the T25 and T15 wrenches needed to handle them.)
• full guarantee on the quality of all parts

*Currently Boxed in Workhorse Boxes - we are out of the fancy ones in the pic, sorry!!

*NOTE: i cannot, and will not be available to offer ANY building or tuning advice for these kits. these include all of the same parts i use to build my production machines, and the quality is above and beyond anything i've used or offered in the past.

we are proud to say that all parts are made in the USA, the majority of which being made right here in Portland, Oregon.

thanks, good luck, and have fun with your new project!

seth c.

Limited Run of Seth Ciferri Version 2 Weiner Dog Machine Kits

Includes everything needed to build a nice tattoo machine...

- CNC Cut Iron Weiner Dog V2 Frame
- Drop Down Rear End and Drop Down Vise Allowing More Space While Maintaining Mini Geometry
- Standard Workhorse Red Oxide Finish on Frame
- Workhorse Blackened Hardware and Antiqued Coin Thumbscrew
- Armature Bar (liner or shader, depends on what you order)
- Steel binding posts and Chris Smith copper contact screw
- 2 Spring Sets with each kit
- 1" 8 Wrap Un-Soldered Workhorse Coils Plus Capacitor Kit
- Insulator Package (coil covering, lug covers, capacitor cover, wire housing, connection covering)
- All Screws you'll need, and some extras. (all screws are TORX drive. T15 and T25)
- Wrenches (since the kit utilizes TORX screws, i'm including the T25 and T15 wrenches needed to handle them.)
- Washer Package including all washers needed... (steel, fiber, and shims)

*Currently Boxed in Workhorse Boxes - we are out of the fancy ones in the pic, sorry!!

*NOTE: i cannot, and will not be available to offer ANY building or tuning advice for these kits. these include all of the same parts i use to build my production machines, and the quality is above and beyond anything i've used or offered in the past.

and we are proud to say that all parts are made in the USA.

thanks, good luck, and have fun with your new project!

seth c.

Limited Deluxe Seth Ciferri Mini Fastback Liner/Shader Kits!

This machine kit comes with parts to build as either a liner or a shader. Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Iron Mini Fastback Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• Spring Loaded Swing Gate Vise
• 1" 8 Wrap Custom Soldered Coils
• Liner and Shader Armature Bar
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included
• Weighs 7.2 oz

Liner typical specs:

• Medium Slow Speed with a Medium Hard Hit
• Running 125-130 Hz @ 6 V Unloaded
• Pushing 5's to 11's No Problem

Shader typical specs:

• Medium Speed with a Hard Hit
• Running 105-110 Hz @ 6 V Unloaded
• Pushing up to 13's Easy

Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Limited Deluxe Chris Smith Carnivore Liner Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Iron Carnivore Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• 1.25" 6 Wrap Custom Soldered Coils
• 2 Liner Armature Bar Options
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included
• Weighs 6.8 oz

Liner typical specs:

• Pushes 5’s to 11’s Easy
• Running Slower and Harder
• 130-135Hz at 6.5 V unloaded

*Comes with the tools you need to build the machine except an Armature Bar Fixture. We highly recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness. You can find one here in our Tool Category

Made in the USA.

Limited Deluxe Chris Smith Supreme Liner Kit!

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Aluminum Frame
• Steel Base and Vise Inlaid into the Aluminum Frame
• Deluxe Blackened Steel Hardware, Spring Saddle, and Clip Cord Yoke Screw
  
• 6 Wrap 1.25” Soldered Coils
  
• Liner Armature Bar
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a flat head screw driver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included
• Weighs 5.6 oz

Liner typical specs:

• Pushes 5’s to 14’s Easy
• Long Stroke, Medium Speed with a Heavy Hit
  
• 130-135 Hz at 6.5 V unloaded

Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Limited Deluxe Chris Smith Hater Liner Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Iron Carnivore Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• 1" 8 Wrap Custom Soldered Coils
• 2 Liner Armature Bar Options
• 2 Liner Armature Bar Options
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches (you will need a flat head screw driver though)
  
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included
• Weighs 5.6 oz

Liner typical specs:

• Pushes 5’s to 11’s Easy
• Long Stroke, Medium Speed with a Heavy Hit
  
• 130-135 Hz at 6.5 V unloaded

*Comes with the tools you need to build the machine except an Armature Bar Fixture. We highly recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness. You can find one here in our Tool Category

Made in the USA.

Limited Adam Ciferri Bulldog Shader Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Iron Bulldog Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• 1.25" 8 Wrap Custom Soldered Coils with 47 Cap
  
• Long Nipple Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included

Adam Ciferri Cast Iron Bulldog Shader Specs when he builds them:

- Tuned for all-day, every-day street shop and/or custom tattooing
- Solid hit that easily pushes 5-15 Mag Groupings
- Runs 95-105Hz @ 6.5 Volts Unloaded

*Comes with the tools you need to build the machine except an Armature Bar Fixture. We highly recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness. You can find one here in our Tool Category

Made in the USA.

Nickel Plated Limited Adam Ciferri Bulldog Shader Kit

Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Iron Bulldog Frame
• Nickel Plated Finish
• Deluxe Blackened Hardware
• 1.25" 8 Wrap Custom Soldered Coils with 47 Cap
  
• Long Nipple Armature Bar
  
• 2 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included

Adam Ciferri Cast Iron Bulldog Shader Specs when he builds them:

- Tuned for all-day, every-day street shop and/or custom tattooing
- Solid hit that easily pushes 5-15 Mag Groupings
- Runs 95-105Hz @ 6.5 Volts Unloaded

*Comes with the tools you need to build the machine except an Armature Bar Fixture. We highly recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness. You can find one here in our Tool Category

Made in the USA.

Limited Deluxe SOBA Mini Rusto Liner/Shader Kit!

This machine kit comes with parts to build as either a liner or a shader. Kit includes all parts needed to build a great tattoo machine...but, it does not include the skills to build a great tattoo machine, sorry not sorry :)

• CNC Cut Iron Mini Rusto Frame
• Black Zinc Finish
• Deluxe Blackened Hardware
• Spring Loaded Swing Gate Vise
• 1" 8 Wrap Custom Soldered Coils
• Liner and Shader Armature Bars
  
• 4 Spring Sets with each kit
  
• All Screws you'll need PLUS necessary wrenches
• Washer Package including all washers needed (steel, fiber, and shims)
• Alignment Tool included
• Weighs 6.8 oz

Liner typical specs:

• Very Light and Quick with a Solid Hit
• Great for Smaller to Medium Sized Groupings
• Pushing 3's to 9's easy
• Running 140-145 Hz @ 6.5 V Unloaded

Shader typical specs:

• Medium Quick Speed with a Solid Hit
• Pushing 5's to 13's easy
• Great for Packing in Solid Color, turn down a bit for Color Blends and Whip Shading
• Running 110-115 Hz @ 6.5 V Unloaded

Comes with or without our Armature Bar Fixture. We recommend picking one up if you do not have one, it is by far the best way to assemble your armature bar and springs with proper alignment and tightness.

Made in the USA.

Model 6 Liner Frame

• CNC Cut Iron Liner Frame
  
• Designed by Marv Lerning, inspired by the classic Waters Model 6
• Black Zinc Finish
• Geometry for 1.25" Coils
• Standard Pinch Vise
• Weighs 2.9 oz

Made in the USA

Model 6 Shader Frame

• CNC Cut Iron Shader Frame
  
• Designed by Marv Lerning, inspired by the classic Waters Model 6
• Black Zinc Finish
• Geometry for 1.25" Coils
• Standard Pinch Vise
• Weighs 3.10 oz

Made in the USA