Special Edition with artwork by Julia Campione of Good Omen Tattoo!

Limited Mike Pike x Cory Rogers Linear Rotary!

🔥Seafoam x Black GOOD OMEN COBRA🔥

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Here are the specifics:

• Precision milled high-grade Aerospace Aluminum body
  
• Custom Black Hard Anodized Components and HD Seafoam Powder Coated Frame
  
• Custom Good Omen Cobra Om Etching Designs by Julia Campione
  
• Blackened Deluxe Hardware
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Made with love in the USA by real tattooers Mike Pike and Cory Rogers.

Thanks and enjoy,
Mike & Cory

NEW Mike Pike x Destroy Troy Halfcup Liner! This is the new slightly smaller and more compact version of the very popular collaborative Mike Pike x Destroy Troy Teacup Liner. Based off Mike Pike's Halfcup Mini Frame with Destroy Troy's alternate forward weighted chunky vise. Less frame, less coil, more vise for an even more forward weighted experience :)  

These  have been in the works for quite a while, but after many frame adjustments, tweaks and updates, they are dialed in and ready. Very smooth running, extremely well balanced, and sturdy, these forward weighted machines are finely tuned and built for years of trouble free use.

Highlights:

• Thick Aerospace 7075 Aluminum Frame with various updates to help with overall long-term strength and vibration reduction
• Chunky Jonesy Style Steel Vise designed to keep more weight over your hand to help balance the pull of your clipcord and reduce hand fatigue
• 24k Gold Plated Destroy Troy Cray Bar with added weight on the front end
• Custom 1" 9 Wrap x 7 Wrap forward weight coil combo
• HD Matte Black Powder Coated Aluminum Frame
• 24k Gold Plated Steel Destroy Troy Forward-Weighted Guillotine Vise
• Deluxe Gold Plated Hardware
• 24k Gold Plated Spring Shelf Yoke for Superior Connectivity
• Pure Silver Contact Screw
• Stainless Springs

Specifications:

• Medium Speed with a Solid Hit
• Running  around 135-140 Hz Unloaded at 6.5V
• Great for use with 3s to 9s, turn up for 11s
• 7.5 oz Forward Weighted Machine
• Made in the USA

NEW Dan Kubin V3/24 Sidewinder!

The most significant update to the V3/24 Sidewinder is the added (and optional) Needle Bar Tensioner. This added tensioner eliminates the need to use a Rubber Band, improving all around machine performance and results. Tensioner reduces spitting and increases power. These machines can be used with or without the Tensioner, it is detached by simply removing the thumbscrew and taking it off the machine. 

Aside from the added Needle Bar Tensioner, this new version of remastered V3 Sidewinder is dialed in and updated with various improvements to increase machine longevity and consistency. 

The V3/24 follows the same concept as the past V3r, but with a focus on what makes a Sidewinder a Sidewinder.  Hard hitting, effortless, and zippy.  -Intended for experienced artists who don’t want to mess around.

Machine Specs:

• HD Black Powder Coated Brass Frame with 24k Gold Plated Hardware and Motor Cover
  
• DK Thumbscrew, new Armature Bar, and updated Stroke Wheel for improved performance
• The renowned rotary liner.  Effortlessly sink any size line by just grazing the skin.
• The motor is the same as the  V2-V4 and V7 Sidewinder, which has proven the test of time.  It has been a favorite of the long time Sidewinder collectors.
• Vice-Lock that easily tightens on nearly any tube
• Great for all varieties of Line Work or as a Fast Shader/Packer
  
• Timing mark on the cam and frame for setting the impact screw. (Just like the V5 and V6)

• Marked stroke dial so you can easily play with the stroke without fear of losing that sweet spot.  You can’t make it too long or too short

Machine Setup:

• Standard Needle on Bar:
  • Needle Bar Tensioner - when setting up your needle and tube, position needle tensioner in desired position depending on the amount of tension you want to add to the needle bar. Adjust position by loosening the thumbscrew and then tightening when you reach desired tension. 
  • Rubber Band alternative setup - Loosen / remove thumbscrew to take the needle tensioner off. Then when setting up the machine, wrap a thick rubber band around the motor cap and across the front of the machine to add needle bar tension. It is recommended that you use Thick Rubber Bands and Dan's Perfect Nipples. 
    
• Cartridges: wrap a rubber band around the motor cap and over the top of the armature bar to counteract the cartridge's upward tension. Thick or standard rubber bands both work, it will just depend on the tension of the cartridge membrane or band to determine with rubber band provides the proper counter resistance.
  

V3R and V3/23 Sidewinders are engineered, designed, and tested by Dan, milled in his most trusted machine shop in Kansas City, then built by DK certified trained technicians at the Workhorse facility in Michigan. All other models are built by Dan and his team in Kansas City. V3/23s go through rigorous QC checks and are all ran through our testing machine to lightly break in. One year warranty on all models. V3R and V3/23 are serviced by Workhorse, all others are serviced by Dan or one of his certified technicians found on his website.

NEW Mini Version of Mike Pike's Mean Mugger Liner! Limited Edition Sour Apple x Black

• Black Antiqued Bronze Plated Iron Frame
• Deluxe Blackened Hardware
• 1" Custom Baby Blue Coils
  
• Swing Gate Vise Guaranteed to Lock Tight on Any Tube
• Running 135-140 Hz @ 6.5 V unloaded
• Medium Speed with a Solid Hit
• Pushing 3's to 11's all day
• Weighs 7 oz
• MADE IN THE USA

Mike Pike Limited Brass Jonesy Liner 

- Distressed Magic Purple Powder Coated CNC Cut Billet Brass Frame with PIKE Stamp 
- Blackened Deluxe Steel Hardware plus Solid Copper Contact and Polished Brass Binders
- Over Under Rear Binder Setup
- Custom 1" 8 Custom Purple Coils
- Quick with a Solid Medium Hit
- Running 145 Hz @ 6.5V Unloaded
- Pushing 3's-9's All Day
- Weighs 8 Ounces (Brass weights a little more, but naturally reduces vibration)
- MADE IN THE USA