Aaron Cain Roundback Shader Ver 2.0, based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

- New CNC Cut Iron Frame
- HD Black Powder Coat Finish
- Deluxe Workhorse Blackened Steel Hardware
- 1" 8 Wrap Custom Dyed Money Coils
- Long Stroke with a Medium Hit
- Running 100-105 Hz @ 6.5 V unloaded
- Pushing 5's to 11's no problem
- Weighs 6.45 Ounces
- MADE IN THE USA

Aaron Cain Roundback Liner Ver 2.0, based on the OG Sand Cast Iron Roundbacks Aaron did years ago, now CNC cut with a few improvements!

- CNC Cut Iron Frame
- HD Black Powder Coat Finish
- Deluxe Workhorse Blackened Steel Hardware
- 1" 8 Wrap Custom Dyed Money Coils
- Medium speed with a Medium Stroke and a Solid Hit
- Running 130-135 Hz @ 6.5 V unloaded
- Pushing 3's to 7's with ease, turn up volts to push 9-11s
- Weighs 6.45 Ounces
- MADE IN THE USA

Special Edition with artwork by Julia Campione of Good Omen Tattoo!

Limited Mike Pike x Cory Rogers Linear Rotary!

🔥Purple x Dark Blue GOOD OMEN COBRA🔥

Built and designed by Cory Rogers and Mike Pike, these collaborative linear rotary machines are smooth running, consistent, and built with only the finest components to ensure years of problem free use.

Here are the specifics:

• Precision milled high-grade Aerospace Aluminum body
  
• Custom Gold Hard Anodized Components and Seafoam x Olive Powder Coated Frame
  
• Custom Good Omen Cobra Etching by Julia Campione
  
• Blackened Deluxe Hardware
• Powered by a top of the line Maxon motor described by Mike Pike to be the "best motor he has ever used in a rotary"
• Comfortable and well balanced with a tube vice that will bite and hold all disposable and stainless tubes
• Forward facing wingnut that won't ride your hand or get in your way
• 4 mm stroke that works great for color packing, shading and also large groupings lining
• Pushes 5 to 49 mag and 9 to 18 Rounds no problem
• Runs best anywhere between 5 and 10 volts
• Most are lining between 8-10 Volts for larger groupings, 5-9 volts for color packing and B&G work
• Great with Needle on Bar or Cartridges
• Lightweight weighing in at a mere 4.5 oz

Made with love in the USA by real tattooers Mike Pike and Cory Rogers.

Thanks and enjoy,
Mike & Cory

The Mercury Wireless Pen has been designed to work flawlessly with the ROVER R-1 Universal Battery, delivering 10 to 15 hours of continuous power.
The Mercury is also compatible with magnetic batteries by Critical/Bishop.
For artists who prefer a corded connection, an RCA cap adapter is available to easily convert the pen for cord-operated functionality.
With fixed strokes of 4.3, 3.5, and 3.0 mm, this machine offers precision and adaptability for every tattooing style.

Design

At its core is the Faulhaber Motor 4.5W (Brushed), renowned for delivering exceptional performance in top-tier tattoo machines.
We’ve enhanced it with a custom heatsink that maximizes efficiency by almost 50%, allowing for over 12-hour sessions without a drop in performance.
The direct drive system with a 100% straight drive rod guarantees precise feedback and control, while the tip-weighted design ensures balanced downward force for effortless pendulum-like motions.
With the weight concentrated at the lower end, this machine is ergonomically optimized for shading, whip shading, and detailed linework, providing the artist with ultimate comfort and control.

Specfications

• Operating Voltage: 5V to 12V (60Hz to 146Hz)
• Length: 131 mm (5.1 in) with ROVER R-1 Battery
• Grip Size: 36 mm (1.4 in)
• Weight: 204 gr (7.5 oz) with ROVER R-1 Battery
• Fixed Strokes: 4.3 - 3.5 - 3.0 (mm)
• Color: Black (anodized)

What's included

• MERCURY M-1 Tattoo Machine
  
• ROVER R-1 Universal Battery Pack
• Cap RCA
• Extra O-rings
• 20ml Oil Lubricant
• Instructions

Dan Kubin X Adam Ciferri Ghost Dog Revival V2 

This is the new updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Dan Kubin X Adam Ciferri Ghost Dog Revival V2 Machine Specs:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• Lemon Lime Faded Powder Coat Finish with Custom Reflective Green Coil
  
• Deluxe DK Blackened Hardware and Specialty Spring
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to easily push 3 to 18 Rounds and up to 49 mag
  
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 8-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Weighs 6 oz
• MADE IN THE USA

Machine Setup:

• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

Limited SOBA Boomerang Liner - Mermaid Green x Black

CNC Milled version of SOBA's braze-up and bolt-up Boomerang, streamlined into a one piece frame with very versatile swing gate vise.

These are finely tuned. With no load most of them run in the 140hz range. At 6 volts you will get smooth medium to fine lines- think 05 and 08 microns. At 7.5 they will bury a straight 9- think brand new sharpie.

- CNC Cut Ductile Iron Frame
- Drilled Out and Lightened Upright
- Swing Gate Vise with and Internal Spring for ease of use
- Custom Mermaid Green Powder Coat Finish
- Deluxe Blackened Hardware
- Deluxe 1" 8 Wrap Custom Matching Coils
- Medium Quick Spreed with a Solid Hit
- Great for Smaller to Medium Sized Groupings
- Pushing 3's to 9's easy, turn up a little for 11's
- Running 140-145 Hz @ 6.5 V Unloaded
- Weighs 6.8 oz
- MADE IN THE USA

Dan Kubin X Adam Ciferri Ghost Dog Revival V2 

This is the new updated and improved version of the DK x AC Ghost Dog Revival. V2 features an upgraded slide vise guaranteed to easily work with any and all tubes, an opened up geometry for better function, performance, and power. Everything else is the same, just dialed in a little more to make it a little better :)

"Since working with Workhorse Irons, I have been given the opportunity to remaster my Revival machine, but being able to merge it into the platform of Adam Ciferri’s Ghostdog.

Thanks - Dan.

Dan Kubin X Adam Ciferri Ghost Dog Revival V2 Machine Specs:

• CNC Iron Frame designed in collaboration by Dan Kubin and Adam Ciferri
• Purple x Blue Faded Powder Coat Finish with Custom Luminescent Pink Coil
  
• Deluxe DK Blackened Hardware and Specialty Spring
• Hinge / Compression machine functionality eliminating any rear spring issues or breakage
• Machine comes setup for use as a slow or medium speed Liner. Also works well as a quick Shader if you turn down the volts a little. To easily change to a slow and punchy color packer, simply remove the backer spring under the front spring.
• Tuned for all-day, every-day street shop and/or custom tattooing
•  Medium speed with enough hit to easily push 3 to 18 Rounds and up to 49 mag
  
• Runs 125-130 Hz @ 6 Volts Unloaded, crank up to 8-10 Volts for large groupings
• CNC Cut Iron with the highest precision and care
• Mini-Size frame with Custom AC x DK 1" Keg Coil for a larger range and less amperage
• Weighs 6 oz
• MADE IN THE USA

Machine Setup:

• Standard Needle on Bar: standard coil machine set up. Work well with our Thick Rubber Bands and Dan's Perfect Nipples, but also work with standard nipples/grommets.
• Cartridges: possible, but not highly recommended.

NEW Mini Version of Mike Pike's Mean Mugger Shader! Limited Edition Sour Apple x Black

• Blended Hot Pink, Ugly Green, and Orange Powder Coated Iron Frame
• Deluxe Blackened and Matching Hardware PLUS Purple Dice Contact
  
• 1" Custom Matching Coils
• Swing Gate Vise Guaranteed to Lock Tight on Any Tube
• Running 110-120 Hz @ 6.5 V unloaded
• Medium Speed with a Solid Hit
• Pushing 5's to 13's all day
• Weighs 7 oz
• MADE IN THE USA

NEW Mini Version of Mike Pike's Mean Mugger Liner! Limited Edition Sour Apple x Black

• Blended Hot Pink, Ugly Green, and Orange Powder Coated Iron Frame
• Deluxe Blackened and Matching Hardware PLUS Purple Dice Contact
  
• 1" Custom Matching Coils
  
• Swing Gate Vise Guaranteed to Lock Tight on Any Tube
• Running 135-140 Hz @ 6.5 V unloaded
• Medium Speed with a Solid Hit
• Pushing 3's to 11's all day
• Weighs 7 oz
• MADE IN THE USA

 Limited Edition

Limited Eddy Deutsche V2 Blade Runner Shaders now in a more compact frame! Same great power and precision, less weight and bulk. 

New Guest Builder, Eddy Deutsche! We are honored to welcome Eddy and his nearly 40 years of tattoo experience and knowledge to the Workhorse team! As a highly skilled master of the craft, an innovator, and an immense source of inspiration and influence to modern-day tattooing, Eddy brings a wealth of knowledge and talent to our team. We are thrilled to showcase some of the incredible machines that Eddy designed and conceptualized during his time living and building machines with Paul Rogers. Through Eddy's wild imagination, a bit of tattoo history and wisdom from Paul has been transformed into exceptionally performing heavy hitting liners and shaders, specifically designed to work efficiently with medium to large groupings all day long.

Highlights:

• Precision Machined Iron Frame Designed by Eddy Deutsche
  
• HD Flat Black Powder Coat Finish
  
• Custom Hand Wound 8 Wrap Coils with Black Tape
  
• Blackened Deluxe Hardware
  
• Pure Copper Contact
• Eddy Deutsche Magic

Specifications:

• Medium / Quick Speed with a Solid Hit
• Designed to run like Eddy tattoos
• Running  around 115-120 Hz Unloaded
  
• Eddy prefers to run these hard at 7-8 Volts, but also work well at lower voltage for a bit less aggressive tattooing 
• Great for fast color packing with 5s to 13s, turn up for 15s
• Made in the USA