Workhorse Irons Dot Box

Small batch of Workhorse Dot Boxes now available!! After many requests we decided to do one last small batch of these. Originally we made Dot Boxes about 10 years ago using Pulse Width Modulation to create intermittent power bursts for dot work. But we stopped making them after a few years when some others copied the design and outsourced overseas to make a cheap knock off version. 

This has been a fun side project we have been working on to help turn any coil machine into a dot machine for making Dotwork Tattoos using controlled intermittent power bursts. The Dot Box is simple and easy to use! It works in-line and plugs directly into your power supply in the clip cord hole and has a range of speed controlled by simply turning the delay knob.

Yes, there are many ways to do dots and if you have a strategy that works well for you already, more power to you! Our Dot Box is just a different approach, and if nothing else, a fun tool to play with, enjoy!

For Best Performance:

• The Dot Box works best with medium or slow, hard hitting liners....or any shader
• Quick and zippy light hitting machines are not as effective
• Best dots are made using Tight Rounds....Loose Rounds seem to blow out a little bit
• Some machines need to be turned up a Volt or two for better results
• Not recommended for use with Rotary machines...use with Rotary machines can damage the motor
• Timing of the tattoo machine when in use with the Dot Box will create various rhythms and patterns, adjust voltage and Dot Box Delay for varying performance and effect
• Match hand speed to the intermittent power bursts to ensure clean dot patterns....if the Dot Box is at a slow setting you will need to move slower, fast setting move faster (duh).

*this is not a power supply, you will still need a power supply, the dot box simply plugs into your power supply.

• Clean and Consistent Power fed through an internal rechargeable battery
  
• 10-12 Hour Battery Runtime
• Runs off battery power or corded power
• Usable while charging with built in smart charge programming
• Large Volt Readout with smaller Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 2 to 14 Volt Output
• 5 Amp Max Peak Output at 50% Duty
• 110 V US electrical plug or 220V EU electrical plug
• 4-cell lithium ion battery with a 47 Watt hour rating (2800mAh at 16.8V)
• Comes with 4 Powerful Quarter Sized Magnets, Feet, and optional Stand
• Weighing in at 1.25 Pound
• HD Black Powdercoat finish
• 4.5" x 3.6" x 1.5" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

No corners were cut and no expenses spared, these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

**Obviously does not include clip cord, foot switch, or tattoo machine. We do have numerous options of each of these items if you are in need of one or all of the above. Thanks for looking!

• Clean and Consistent Power
• Volts, Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 2 to 16 Volt Output
  
• 110 V US electrical plug or 220V EU electrical plug
• Comes with 3 Powerful Quarter Sized Magnets, Feet, and optional Stand
• Weighing in at 1 Pound
• Workhorse Olive Green Powdercoat finish
• 4.25" x 3.6" x 1.35" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Desktop Stand - use included 3m adhesive to attach included magnets to back of power supply, then magnet the supply to the stand
• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply

No corners were cut and no expenses spared, these power supplies are made of the highest quality parts and components. Built to last and MADE IN THE USA.

• Clean and Consistent Power
• Volts, Hertz, Duty, and Amp Readouts
• Constant ON Option (simply push the silver button in the logo)
• On/Off Switch on Side
• Heavy Duty Female Plugs to Securely hold CC and Footswitch Cords in Place
• Will work with all Coil and Rotary Machines
• 110 V US electrical plug or 220V EU electrical plug
• Comes with 3 Powerful Quarter Sized Magnets, Feet, and Desktop Stand
• Weighing in at 1 Pound
• Various Powder-coat finishes
• 4.25" x 3.6" x 1.35" Aluminum Body
• 1 Year Warranty covers any manufacturer defects leading to product failure. Warranty does not cover excessive abuse or damage, but if you decide to throw it across the shop against the wall and then hit it with a hammer, we will still try to help repair the supply for you.

Mounting Options:

• Desktop Stand - use included 3m adhesive to attach included magnets to back of power supply, then magnet the supply to the stand
• Side Mount - use included 3m adhesive to attach magnets in a row on the right side of power supply, then magnet supply to side or cart or tool chest
• Flat Mount - use either the included feet and attach to bottom of power supply or included 3m adhesive to attach magnets to bottom of power supply